I ran into the same thing with the factory BMW caps. Rusty washers and all. Seems a bit strange, but the fit nice and tight. Also, a bit of a problem on the drivers side. I must have pushed a tad hard remounting the mirror. It pushed the 6:00 o'clock position of the inner ring to far in, preventing ANY adjustment of the mirror. Little panic moment there, but took the mirror off and didn't man handle it and everything is running smooth now. About 45 minutes for both sides. Would go MUCH faster if I had to do it again, and didn't have to mess with the drivers side 10 minutes longer, troubleshooting a stupid mistake. Thanks for the vid dude!!
maybe someone used screw on the original mirror caps to prevent people to steal them. If you know how to do it (and take a bit of risk to damage the caps) you can pull them off in a couple of seconds.
You are so lucky that you can buy on Amazon. In Denmark we have one webshop where we can buy styling for our cars. Not much but Better than nothing😂 okay we can also use eBay but we have to import parts form Germany or England. Love your videos. Love from DK😘😆
I'm trying to take out my OEM covers and they are the same, screwed in. But the screws won't come out because it seems the screws are too warn away, any advice?
Possibly a question you can't answer but, I have Z4 G29 M40i. Would these caps and blinkers fit? Amazon says no but, they look exactly like the mirrors on mine.
I am not sure if you can assist, but i have moisture in my driver side headlamp which causes my left turn signal to malfunction, Daytime/parking lamp malfunction and my adaptive head to malfunction any help would be appreciated
After reassembling the housing, i pressed the mirror back in gently, heard it click into place, but now they won't rotate back down (I hear it whirring). I thought maybe it wasn't properly seated, so I tried pressing on one a bit more firmly, and i heard something pop. Now it rotates, but it is much looser. It feels like i snapped a clip or two on the back of the mirror. I'm afraid to press in the other mirror now. Anyone know whats up? I heard it click into place, dunno why they didn't want to rotate back down, but I dont want to break the other too.
can you please help me with the exact brand of led turn signal bulbs you used. I have tried Lasfit and others still get the error and flashing. Even bought the ob connector and coded every light in led and changed to non active in beammer code. Sill no luck
I can see that happening as the oem ones have a built in rubber gasket around them and I haven't seen any sequentials that do. As a precaution I'm going to avoid spraying water directly at them when washing.
Love the non-comp version m2 content. It's like we've basically been forgotten already...
followed your f30 build. got my own f30. now i’m diggin this m2 build. looks sweet
Me too hahahaha
Gonna start making my f30 look thick
Was hesitant on picking up the blinkers but after seeing it here, I'm pulling the trigger!
I ran into the same thing with the factory BMW caps. Rusty washers and all. Seems a bit strange, but the fit nice and tight. Also, a bit of a problem on the drivers side. I must have pushed a tad hard remounting the mirror. It pushed the 6:00 o'clock position of the inner ring to far in, preventing ANY adjustment of the mirror. Little panic moment there, but took the mirror off and didn't man handle it and everything is running smooth now. About 45 minutes for both sides. Would go MUCH faster if I had to do it again, and didn't have to mess with the drivers side 10 minutes longer, troubleshooting a stupid mistake. Thanks for the vid dude!!
The smoked lights look fucking amazing ! Wasn't happy on that decision at first but now they jus look almost custom headlights
Looking great, Jon! I did these same two mods on my F30 a month ago and it made a dramatic difference in the front end's aggressiveness.
Don’t get my M2 for a week but already lining up my mods, love your build!
Did the same on my 135i , looks amazing on the M2 🤗
maybe someone used screw on the original mirror caps to prevent people to steal them. If you know how to do it (and take a bit of risk to damage the caps) you can pull them off in a couple of seconds.
or BMW did so in order to prevent the same. Quite expensive OEM caps
I craced one of mirrors today while taking em out :( but love the new looks of mirrors, cracking good :D
Love this channel 👏🏻
Never knew about the Dynamic Sequential Turn Signal Mirror LED set’s 🤔
Added to the X3’s improvement list 👌🏻
Dumbo ears lol. Proper comparison
You are so lucky that you can buy on Amazon. In Denmark we have one webshop where we can buy styling for our cars. Not much but Better than nothing😂 okay we can also use eBay but we have to import parts form Germany or England.
Love your videos.
Love from DK😘😆
can you see indication light flashing when you inside of the car? like it is on stock , little orrange bit
I'm trying to take out my OEM covers and they are the same, screwed in. But the screws won't come out because it seems the screws are too warn away, any advice?
Hahaha the dumbo ears 😂 I feel that
Lol when your M car doesn’t come with M style mirror caps 😂😂 love the cars tho man
Possibly a question you can't answer but, I have Z4 G29 M40i. Would these caps and blinkers fit? Amazon says no but, they look exactly like the mirrors on mine.
Looks wicked. What are you doing with the old mirror caps
I am not sure if you can assist, but i have moisture in my driver side headlamp which causes my left turn signal to malfunction, Daytime/parking lamp malfunction and my adaptive head to malfunction any help would be appreciated
After reassembling the housing, i pressed the mirror back in gently, heard it click into place, but now they won't rotate back down (I hear it whirring). I thought maybe it wasn't properly seated, so I tried pressing on one a bit more firmly, and i heard something pop. Now it rotates, but it is much looser. It feels like i snapped a clip or two on the back of the mirror. I'm afraid to press in the other mirror now. Anyone know whats up? I heard it click into place, dunno why they didn't want to rotate back down, but I dont want to break the other too.
can you please help me with the exact brand of led turn signal bulbs you used. I have tried Lasfit and others still get the error and flashing. Even bought the ob connector and coded every light in led and changed to non active in beammer code. Sill no luck
These will fit a 2016 f80? THe ones that you have linked to the video? Thank you!
where did you bought the eyelids?
Do you know if the sequential blinkers would fit a 2019 bmw x4 G02?
Does these Smoked Sequential Mirror blinkers fit on the F10 LCI?
How did you purchase the M2? Finance or full buy? and how much do you have to pay per month
Do you also have these blinkers for the E90?
Do you go back and add paint film as well as ceramic coat the new mirror caps or just do one of the two, or none?
Prob just ceramic
Great video as always 👍
Did you have any issues after installing the sequential blinkers?
I hear couple people say it causes water leaks inside the mirror housing.
I can see that happening as the oem ones have a built in rubber gasket around them and I haven't seen any sequentials that do. As a precaution I'm going to avoid spraying water directly at them when washing.
I love those mods
What would u buy for a f30 since these wouldn’t fit a f30. I don’t really wanna pay the full 200 for the kies Motorsport ones.
I just got a 2016 340i
These fit an f30
Keep the content coming
absolute snack mode ... ahaha love it
For anyone that’s installed these, does this increase wind noise?
Nah
why does it look so good LOL
I just tried that... now I need a new mirror 🙁
Get a GTS hood to make it even more aggressive
I cracked My glass trying to clip it out…
Can you link the 6k lights you’ll be using
Check description 😉
Thic F30 do you happen to know if these will work on an f80 as well?
Yup, same bulb
Your account should be Thicc F22 😂
*f87
First 🙌🏽
Dealer installs oem caps with screws and washers as anti theft.
And I just now reached the part where you found out they were oem sorry bro 😂
Second 🙌🏽