I've been wanting to get RDVX but don't have the cash but as soon as I do bam I'm going to. These concave implants sound dope as. Can't wait. You guys should also make footstops
You could even slap griptape right onto the implant and put it on top of the existing grip. Then you wouldn't have to peel anything off. Probably wouldn't have the same seamless feel but it would still work.
Ok so I have had problems with RDVX, It wouldn't stick to my Comet Archetype, It would fall off when I would lay my board up against a wall and it would come off when I was in mid slide which was really scary, and my feet would slip off when I had it on my Arbiter kt and sort of stuck to it. I really want to try it again but don't want to throw away $25 and if i did buy it again I would also want to try one of these implants but with my history of it not sticking I feel like it wouldn't stick to the implant either. Anyways SICK video and GREAT song choice.
Hit us up on FB, we made a glue change to make sure that grip adhesive doesn't setup / set off prior to being put on which sounds like happened to you. Hit us up and we will get you some new stuff. The reason most people had no issue was because MOST of the time everything worked properly. The fix is for those times like yours where it didn't. We can't rule out something weird being sprayed overtop of your deck, but the Comet dudes shred with our stuff all the time with no issue, so my guess is that's not it.
Those are the Inplants we have been working on for the last 6 months. We didn't hit our goal on Kick Starter but the project has continued. As crazy as it sounds the biggest issue has been getting the online store etc up and running so that we can sell them. That stuff is sort of the additional advantages that you have with kickstarter IF you get funded. Should be out and available within the next two weeks. Which shape were you most interested in?
Ramiro Molina Hey RM, Inplants just went live on amazon, so you can check those out / buy now when you are ready; www.amazon.com/RDVX-Coarse-Longboard-Grip-Inplant/dp/B00WFHQJPQ
There are a lot of advantages to 3D printing, speed of production and cost are not one of them. We all buy made in china plastic every day and that setups our expectations of price, but value is the combination of price and performance. There are already cheaper, heavier, urethane options out there, these are just not one of them. If you want to try it, get a Gill for $10, or Louis' pro for $15, and go skate.
AustinGreen97 failed on the whole kickstarter deal but finally got them live in production and available; www.amazon.com/RDVX-Coarse-Longboard-Grip-Inplant/dp/B00WFHQJPQ
An implant that had W and radial in one would be awesome. But the idea is amazing, I would totally pick one up if they came on the market!
Ben Baerg just finished getting them up online, Inplants are live.
www.amazon.com/RDVX-Coarse-Longboard-Grip-Inplant/dp/B00WFHQJPQ
You guys should release the STL file so those with printers can print there own :)
Nice to see that Hollywood spot still getting skated
I've been wanting to get RDVX but don't have the cash but as soon as I do bam I'm going to. These concave implants sound dope as. Can't wait. You guys should also make footstops
I feel like I've heard this song recently… haha great video and sweet product idea. Can't wait to try these
You could even slap griptape right onto the implant and put it on top of the existing grip. Then you wouldn't have to peel anything off. Probably wouldn't have the same seamless feel but it would still work.
does the grip lose its stick every time you peal it to adjust it ?
Want the arrow longboard deck so bad
The outro is fucking amazing haha
So where I can get the minimalist one right now?
Ok so I have had problems with RDVX, It wouldn't stick to my Comet Archetype, It would fall off when I would lay my board up against a wall and it would come off when I was in mid slide which was really scary, and my feet would slip off when I had it on my Arbiter kt and sort of stuck to it. I really want to try it again but don't want to throw away $25 and if i did buy it again I would also want to try one of these implants but with my history of it not sticking I feel like it wouldn't stick to the implant either. Anyways SICK video and GREAT song choice.
You probably did not put it on right and if you did you did not make it stick properly.
I put it on exactly how I put any other brand of grip on.
Hit us up on FB, we made a glue change to make sure that grip adhesive doesn't setup / set off prior to being put on which sounds like happened to you. Hit us up and we will get you some new stuff. The reason most people had no issue was because MOST of the time everything worked properly. The fix is for those times like yours where it didn't.
We can't rule out something weird being sprayed overtop of your deck, but the Comet dudes shred with our stuff all the time with no issue, so my guess is that's not it.
is there an stl file?
You guys should make parts for the outside of the board so yo con male a pocket for your feet
Are they brothers?
Hey bro what are the name of those tiers you have on your board I'm going to buy new one for my long board
Those are the Inplants we have been working on for the last 6 months. We didn't hit our goal on Kick Starter but the project has continued. As crazy as it sounds the biggest issue has been getting the online store etc up and running so that we can sell them. That stuff is sort of the additional advantages that you have with kickstarter IF you get funded. Should be out and available within the next two weeks. Which shape were you most interested in?
Ramiro Molina Hey RM, Inplants just went live on amazon, so you can check those out / buy now when you are ready;
www.amazon.com/RDVX-Coarse-Longboard-Grip-Inplant/dp/B00WFHQJPQ
It's bad that in Austria we don't have RDVX:'(
Again dope idea but why 15-25$ for a piece ?
There are a lot of advantages to 3D printing, speed of production and cost are not one of them.
We all buy made in china plastic every day and that setups our expectations of price, but value is the combination of price and performance. There are already cheaper, heavier, urethane options out there, these are just not one of them.
If you want to try it, get a Gill for $10, or Louis' pro for $15, and go skate.
What's the name of the design software?
Zach Jefferson used to be called PTC Pro-Engineer, renamed to PTC Creo.
This is genius
AustinGreen97 failed on the whole kickstarter deal but finally got them live in production and available;
www.amazon.com/RDVX-Coarse-Longboard-Grip-Inplant/dp/B00WFHQJPQ
dope
What's the guy on the rights setup
Original Arbiter kt, Caliber white and gold 50*, and I think Original proto wheels.
+Greenoakskate That isn't a arbiter kt mate that's a sector 9 Arrow and RAD freeride wheels
oops I didn't realize he said "guy to the left"
Lindo
the song they used is by alt j made to make fun of all beer commercials they wrote it inm20 minutes
buy a 3d printer and do it yourself, get on kickstarter and get those bad boys to market.