[ 鋼の塗裝 ] FULLY PAINTED 1/60 MAZINGER Z マジンガーZ INFINITY Ver.
HTML-код
- Опубликовано: 18 окт 2024
- 全塗裝 FULLY PAINTED 1/60 マジンガーZ (マジンガーZ INFINITY Ver.)
Please like share and subscribe !
Patreon - / omgtoys
Contact - omgtoysngames@gmail.com
TWITTER - / onesixomg
FACEBOOK - www.facebook.c...
![[ 鋼の評測 ] BANDAI 1/60 マジンガーZ (マジンガーZ INFINITY Ver.) MAZINGER Z REVIEW](http://i.ytimg.com/vi/nsxsbmbXIyM/mqdefault.jpg)
![[ 鋼の評測 ] BANDAI 1/60 マジンガーZ (マジンガーZ INFINITY Ver.) MAZINGER Z REVIEW](/img/tr.png)
Awesome work! Please upload more videos showing painting process 🙂😁
sure thing 🤗
wow the color is a lot juicier 😍great job! hou leng ah!! this video gave me interest in building and custom painting. thanks for sharing. i can understand some of the cantonese i believe that every person has its own unique way of doing things some might say, why do it complicated when you can do it easier but you will not be satisfied because its not what you intended to. the last touch of Zero gun metal paint gives a chrome feel.
我都整咗部，但打磨同上油經驗尚淺，唔敢亂嚟。您啲頻道對我有好大啟發，分析亦好獨到。Thanks🙏🏻🙏🏻🙏🏻
多謝😊😊😊
勁。尐件咁大，不但難噴，最難-其實係防塵。片中 Close-up所見，非常乾淨，利害。讚！
另一讚係隻半光黑，聰明選擇。
我噴HG都多塵到PK
都有少少塵, 只係唔多覺 😊
紫底+透明藍 又學到野 謝謝!
我噴等唔好 😥
Hi good paint job overall. May i know the time interval between the clear purple layer 1 to 3 to be dry.thanks
Amazing job. The figura increase beautiful 1000% . thanks for show us your paint work
thank you ~ 😊
噴啲咁大甲要用Trigger Type先均勻,同噴遙控模型車縠一樣
冇錯
I thought this was the metal build version 😂 Damn, awesome work bro!
😅😅😅
我好想知道藍色點樣噴啦唔該你
so nice.. i wanted to paint but duno how to begin with , the only down part is the eyes too dim
start with spray can 😁
除咗多咗人砌模型之外，我都發現到你嘅subscriber人數多咗喎。我真恭喜你呀（李小姐召喚）。預祝好快有10萬訂閱。
李小姐 ?_? 10萬冇可能 ..... 做到八十歲都唔會有 😥😥😥
你支噴筆有冇安油/水隔？
我個Compressor已經有，仲駛唔駛安？
你用嘅洗筆水係咪Mr. Tool Cleaner 400? 係咪可以洗晒 Arcylic, Lacquer, Enamel 油GA啦?
Compressor有就得. Arcylic 唔知, 但 Lacquer Enamel ok. gaia T04h 計落平過 400
@@OMGTOYS 謝謝。啱啱睇到呢個 ruclips.net/video/WuzHFPpW9UA/видео.html
有冇可能就係RX-78 Unleashed 個樣呢？
透明色稀释系1：1噶。你有冇搞错先。我以前都系稀到1：2好鬼难用，后黎有高人指点迷津先知
開幾稀其實都冇一定, 睇個人習慣 😊
師兄, 放唔到入櫃, 你放响邊? 我準備砌了, 在外國, 唔潮濕, 但唔入櫃點防塵?
另外, 師兄你用邊隻銀打底? 半光黑又用邊隻?
modo zero銀
門外漢既我就覺得超靚
真係幾靚㗎 😊
又噴得幾靚喎，衰鬼
😁😁😁
好 想你幫我噴油唔知收幾多錢呢？？？
等我再儲多的功力先啦 😅
都噴得好好了
隻銀超靚
(*￣3￣)╭ 係
不得外出，产量好快哦，几时pg perfect strike?
要排隊 ......
好鬼死靚 隻藍我會用黑鐵底再上gaia ultramarine 慳好多功夫
ultramarine 我有但未用, 唔實知乜料 🤔
Nice Bild！
But, I have a question.
Why don't you paint the cover on the nose of the kit gray or Gunmetal gray?
In the movie, that part is painted in the same color as the neck, not metallic blue.
watch the movie again start from 56:34
In this scene, it looks dark due to lighting and sky color.
However, in a bright scene, you can see that the color is the same as the indirect color.
Look again at this scene in the movie.1:11:36
@@整備士サキオカ oh, you mean the part that's above the nose ? yeah, it is grey. Too lazy to do the masking 😳
@@OMGTOYS
understood.
The video has been uploaded, so repainting will be difficult.
But your skills are not low.
I am looking forward to a new nice Bild.
Thanks for your reply!
估唔到你會噴油，留言支持左先
呢隻一定要噴啦
個人會選擇手腳紫藍用返實色，拍片依家睇太過偏藍
下次試下
very nice bro ! good Job !
😊😊😊 thank you ~
隻銀超靚 ! 藍色太淺, 動畫原色應該深一點???
實物深啲
虚心請教咁大件點樣避免噴到表面流眼淚？感謝
一見個位噴濕咗就移開噴第二度 😊
請問有冇試過Alclad2 果D, Lacquer 油? 有冇比較過ZERO邊個好, alclad2.com/finishes/
冇用過呀 ~ 油嘅牌子太多, 跟唔到 😅
想問點解要上咗黑色做底色先再上silver 色?有乜好處？
望落去實啲 😊
未睇先like系常識吧
👍👍👍
可唔可以show 吓你d作品點様display?
匠機條片有影過 😳
師兄有冇模型工具介紹？想買噴槍、噴油箱、氣泵介紹邊到買？
PM store 😊😊😊
噴得唔均勻係一個好難處理既問題,尤其大件模件
唉 ...... 冇錯 😥
Hello! 非常正！
請問依家重有冇得買同埋你呢盒的購入價多少？
bandai 模型唔會冇得賣, 去旺角睇
Nice!!!
Thanks!
想問問隻銀色是否一定要用硝磯油去噴? 我已經用咗mr hobby 光澤黑打咗底, 如果用返mr hobby super chrome會否溶咗隻黑底色? Thanks!🙇
其實你有冇噴過嘢?
@@OMGTOYS 初學者! 之後都係噴單色, 未試過咁樣噴! 真心求教!
銀係modo zero 銀😳硝磯唔會溶硝磯
靚👍🏽 ~ 唔講~唔知嘅 ！以為係超合金🤣
係㗎 😁😁😁
手腳藍色，請問用TS-53噴罐，直接噴？定要落底色光澤黑後再噴，謝謝？
直接噴
可唔可以講下個噴油工廠裝備
噴油工廠 ? 只係好一般嘅工具 😅😅😅
好正！
😜
噴完光黑後變啞黑, 巳經濕噴, 會吾會模型問題? 係ultraman
點會係模型問題 ...... 🤣🤣🤣 注意濕度 (開冷氣)
@@OMGTOYS thx
呢隻銀真係好幼滑,好靚,不過成本高
平時用開T24都差不多=]
$32 ok 啦😁
Which is the name of the pincers for holding the pieces while you are painting them ?
what brand you mean? Mr. hobby
ONESIXOMG the tiny pincers for holding the pieces of the model kit
砌咗一個月,啱啱完成!
恭喜 😁😁😁
有冇channel 可以upload 我嘅作品比吓意見?
我都想知咁大隻，噴到滑嘟嘟又冇塵 黐住， 點樣噴到可以冇塵。
抹一抹抽風箱先噴 😊
@@OMGTOYS 下次試吓先。謝謝！
ONESIXOMG 請問
你用邊隻抽風箱?
請教下，黑色部份 你用左邊隻油？ thx
郡氏半光黑
这个那么大如果出个魔神凯撒 skl最终形态咁就正啦😍
諗起都驚 😳
@@OMGTOYS 唔细惊啦继续喷涂我念如果系魔神凯撒就真系正啊咁大隻霸气镇宅神物啊😄😄😄
想問下心口紅色部份唔洗噴油？
冇噴
真係好正! 可以開工啦😄
\(￣︶￣*\))
👍👍👍
😍😍😍
想知點解會噴MX-20? 係先噴咗,然後再上銀? 同埋遘問半光黑用邊隻牌子?
MX20 係關節用 / 半光黑乜牌子都得 😊
師兄真係好銀鍾意銀, 因為有銀, 所以好銀銀
就係冇銀先要噴銀 😥😥😥
我想問下你用咩噴槍😆
iwata
WOW!
😁😁😁
噴射飛船 會上色嗎？
不會鳥 😅
@@OMGTOYS 可惜
好型，我稳你代工一只万能侠
收几多？
冇乜自信, 遲啲先諗 😳
好正 見你買左果集我都有跟 對翼你最後有無噴到？
@@Shadowlaw1986 冇 😅😅😅
想問問 雙星罐裝油半光黑用邊隻型號好 謝謝介紹
只得一隻
噴油時播放隻背景音樂是甚麼?我好感興趣。
youtube music
@@OMGTOYS thanks
想問下 係點拆散佢 上色 通常我都係 好難拆返散 教下我
組合柱位要削幼 or 斜角剪短啲 😳
你隻光黑1：幾來開…
2 ~ 2.5
THX…仲想問問氣壓幾多來噴漆
師兄仲想問下你用咩氣泵？
sparmax tc-610h plus
Zero 金偏黃
試試先
ＤＸ超合金魂??👍
靚過 😊
那當然靚過，不過想請教，噴得咁靚. ，如何防刮花?😅
師兄又一神作!!! 如果巴巴托斯果條片好似依條咁就完美!!
有機會拍多啲
想問下啲黑色件點噴?🙏🏻
半光黑
@@OMGTOYS 係咪唔洗噴底色直接噴就得 新手唔太熟XD
咁對翼呢????
唔搞 😅
@@OMGTOYS 你竟然做得出.......
型爆
(* ￣3)(ε￣ *)
係第二隻?🤣🤣
唔 .... 冇呀 😮
請問點樣做到朋友號玻璃係藍色?
噴透明藍
師兄想問問你氣泵氣壓調多少？
氣壓睇個人習慣, 我通常 20 psi 多啲啲 😊
@@OMGTOYS 收到，話時話你把聲真係好似黎明！
squirting怪来啦！！！
||ヽ(*￣▽￣*)ノミ|Ю
皆旺601有Modo
3Q
系咪翻炒啊，还系买两只1：60?
苛苛苛 ~ 😁😁😁
依然高汁，罵煎家sad陀
😁😁😁
你都平民。。。
我係 ...... 😥😥😥😥😥😥
@@OMGTOYS 我都係因為你先的起心肝買噴槍咋😁
@@Mokfung1985 好事嚟 😁