👇Sponsor & Any Good Stuff👇 👇影片裡的好東西在下方連結👇 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒 Special Thanks: ➤ Archwick: Also check out their sniper rifles 🛒Goods : www.arch-wick.com/ ➤ Plus Gel Blaster Field: Special Thanks for letting us filming on their field! If you want a family day, contact them! 🛒Goods : facebook.com/profile.php?id=100063918788979&mibextid=LQQJ4d ➤ACETECH: you guys do make some amazing tracers and chrono 🛒Goods : www.acetk.com/ 🛒 Amazon Goods : amzn.to/3sr5I2n ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! 🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html ruclips.net/user/sgaming/emoji/7ff574f2/emoji_u1f6d2.png
SSG10 uses a 9mm inner diameter spring and 13mm outer diameter, which is the current standard of upgraded/high end airsoft bolt actions, leave HTI and striker series. And since this is a VSR base, it will fit pretty much any sniper springs on the market
hello friend can I know where did you buy this Airsoft Gun..can you share the info..I want to buy but don't no where n how get this Airsoft Gun..hope you can share.. TQ
I would say both are equally good, it is now on the matter of external look taste. Also I am damn as hell wishing archwick would make their MK13 M7 to gen 2 where it will use real mag position like this one
Hello, can I ask you guys about the Archwick B&T SPR300 trigger? I have problem about the trigger, when I shoot it by slowly pull the trigger(squeeze), at some point it suddenly loose and not firing! but, if I shoot it by quickly pull the trigger it shoot normally. According to these problem, do you suggest to loosen or tighten the trigger adjustment? 33:50 Thanks
Since we don’t have the gun with us I would recommend tightening it first and test it out, if it feels worse loosen it and test it again. Also I would recommend adding a little bit of thread lock to the screws.
Why would you lube the externals of the bolt? It attracts dust and dirt particles. One day of playing on a dry outdoor field and your bolt's gonna be full small scratchy particles. Whole point of using a bolt action sniper rifle is to play outdoors with it. If the pull isn't smooth then the guide rings are crap or something is scratching somewhere. They're made out of Delrin (POM) and don't need to be lubed, if they're not POM replace them with POM ones. Lube on external parts = big no.
@@4UADSmartAirsoft Lube doesn't fix the scratchy sound, it just makes it quieter. I wonder how much would polishing the cylinder externals and replacing the guide rings help.
We paid too much attention on the cylinder volume. As long as we can get 3J of energy without having to pull hard, then we just need to handle the rest of the gun (accurracy and consistency, you know the usual)
Год назад+1
Cool looking rifle and excellent production as usual, but loading ramp... no-no from me.
Most recoil/blowback in airsoft today is provided by bolt being pushed back by either gas or electric (EBB). Which is why it's not feasible to be implemented in bolt action rifle. Though in some DMR or semi auto rifle, you can have a little recoil
You can actually do that by having a strong spring and heavy piston. The idea is that when you release the triggger, the spring will try to push both ways. And since the piston is heavy (meaning it has bigger ineetia, it will try to hold its position stronger than normal pistons), the spring will have stronger push back (to the stock itself) than normal airsoft bolt actions.
@@luiswen9437 During our twelve weeks of sniper training we learned that the trigger unit on a precision rifle should be as dry as possible and free of grease/oil. Otherwise dust/sand/dirt, etc. gets magically attracted and can lead to various problems. The parts are not extremely stressed and therefore do not need grease/oil. The only thing we have used was lighter fluid. Lighter fluid leaves a minimal protective film after it evaporates, which prevents rust and as bonus it does not attract any dust/dirt/sand etc.. And speaking of airsoft rifles, especially with gas snipers and also spring pressure snipers, it is extremely important not to have grease/oil in the hop-up rubber/barrel. Even a small amount of it makes a big difference if you hit or not. I have been using my Tanaka M24 completely dry without grease/oil for 12 years. I also only use gas without silicone oil.
@@shorty7943 Interesting, the way you explained it does make sense with real firearms. I think most airsoft guns are not made to the same standards. I would try running the trigger unit dry. But I'd still probably lubricate the piston at least.
@@shorty7943 I can understand with a real bolt action rifle most parts aren't stressed much at all. But with a spring air rifle your trigger sear is in fact under quite a bit of stress
👇Sponsor & Any Good Stuff👇
👇影片裡的好東西在下方連結👇
Go check out 4UAD new arrival & lubricant pen
【4UAD 相關商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
Special Thanks:
➤ Archwick: Also check out their sniper rifles
🛒Goods : www.arch-wick.com/
➤ Plus Gel Blaster Field: Special Thanks for letting us filming on their field! If you want a family day, contact them!
🛒Goods : facebook.com/profile.php?id=100063918788979&mibextid=LQQJ4d
➤ACETECH: you guys do make some amazing tracers and chrono
🛒Goods : www.acetk.com/
🛒 Amazon Goods : amzn.to/3sr5I2n
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
ruclips.net/user/sgaming/emoji/7ff574f2/emoji_u1f6d2.png
haha I love this channel. Chill vibes, cats, relatable issues on the builds but competent builders and just a slight spicy edge of memeage. good sh*t.
Thanks for the Love JoJo~~~
21:11🇲🇾🇲🇾
29:48🥰🥰
Very nice video
猫猫也很可爱
等我的月底到手了要研究一下支架bipod用什么好
感謝支持~~真的很謝謝
這把應該可以鎖上短版的M lok魚骨, 要不就是直接鎖上標準的魚骨片(槍身要鑽洞) 再轉接魚骨即可
If it's a 90 degree trigger, just pull the trigger and push the cylinder in. That's the most convenient.
Very unique design , bolt and short barrel are integrated
Yep its already upgraded out of the box, just change the spring and you are good to go
i love ur channnel and ur cats plsss show more😆😋
I will make sure I spray more cat weed around lol
好期待小賴的影片！！
我下週也打算拍一部 SPR300 戶外測試 （20-90m) 的影片。
來看看阿~~~這把槍的原廠配置頗逆天的
I love kittens🐱🐶💗 and I love this channel❤ and my mother💗
They make international shipments to Argentina
haha time to do business XD
Sipping on my morning coffee while I watch this and never have I related more to an airsoft channel as a cat owner myself lol great content as always
Cats are the best~
Keep em comin' boys. Legendary production❤
Dude thanks man we will keep up the work~
Only a chrony test missing , rest as always, amazing!
Sure will include that next time
a semi-auto gbb with burst fire DMR/SPR is the closest I can get to a sniper rifle in airsoft
Oohhh yeah! Ordered mine last week :)
Waiting on the apc9 release! Thanks again 4uad for showing this masterpiece.
Anytime man, will see what gun we got next!
You guys rules!! Super top video and amazing equipment!! So cool...
Tissue Paper and Super glue always work!
Can you please make a review on the elite force h8r gen 2?
Will see what we can do
I'm curious about the scope size used
Vectors optics 2*10 scope
Will the novritsch ssg10 springs fit with this sniper rifle?? I want to use a stronger spring but I’m not sure if it will fit😂
Not perfectly sure to be honest since I don’t own one myself….
SSG10 uses a 9mm inner diameter spring and 13mm outer diameter, which is the current standard of upgraded/high end airsoft bolt actions, leave HTI and striker series. And since this is a VSR base, it will fit pretty much any sniper springs on the market
@@Azukaae to SPR300 the spring is 11x13mm 😇
already preorder!
眼明手快!
4:51
-如何正確的趕貓-
滾! XDDD
Cat super😊
Cat power!
Awesome content as always.. I think you can pull the trigger to get the bolt in, no need for a screw driver on the thingy ;-)
Ohhhhhh shit xDDD
Indeed. You will need to also push the secondard safety though. They followed Maple Leaf's 2020 iteration on VSR trigger's second safety.
你好，我经常在弹夹剩下最后一颗bb时拉栓复位会卡住，bb会跑到后面来，我在弹夹弹簧后面垫了东西还是会有一样的情况，请问有没有遇到过相同的问题？
這個時候可能要確認一下Hop座看看ＢＢ彈止檔有沒有鬆掉,慢慢確認看看, 祝一切順利
hello friend can I know where did you buy this Airsoft Gun..can you share the info..I want to buy but don't no where n how get this Airsoft Gun..hope you can share.. TQ
Hey man it’s still not out just yet, the production model will be ready by may, you can check out archwick for more details
VSR10マガジン風のバイパスカートリッジが付属してる筈だけど気づかず加工して作るとわｗ
What do You recommend guys Archwick mk13 or Ics tomahawk?
Ohhhh damn that is a hard question, both are top performers, but if you like real steel outlook and like to upgrade stuff SPR300 seemed more ideal
I would say both are equally good, it is now on the matter of external look taste. Also I am damn as hell wishing archwick would make their MK13 M7 to gen 2 where it will use real mag position like this one
請問汽缸相比ics tomahawk，是不是ICS的初速提升空間比較大？
汽缸容量Tomahawk 的比較大，不過說真的這兩把都可以輕鬆到180所以其實差不多
Hello, can I ask you guys about the Archwick B&T SPR300 trigger?
I have problem about the trigger, when I shoot it by slowly pull the trigger(squeeze), at some point it suddenly loose and not firing!
but, if I shoot it by quickly pull the trigger it shoot normally.
According to these problem, do you suggest to loosen or tighten the trigger adjustment? 33:50
Thanks
Since we don’t have the gun with us I would recommend tightening it first and test it out, if it feels worse loosen it and test it again. Also I would recommend adding a little bit of thread lock to the screws.
@@4UADSmartAirsoft Thanks bro 🙏🏻
What kind of airsoft gun is that? I mean it has fur all over, it even moves on its own. You must be a proud owner of it
Yah those 2 little guns moves around and vomit in beds too hahaha
@@4UADSmartAirsoft ayo
我的SPR300 終於到了，真香，請問彈夾挖孔那一段的用意是什麼嗎?? 有看沒有懂 謝謝
因為亞齊威忘了附彈匣轉接座所以我只好用我的VSR10彈匣來改
The best🙏
SPR 300 🔝🎯
one laser gun out of the box!
@@4UADSmartAirsoft thanks 🙏😁
兄貴、SpringをM150に変えたいのですが、VSR用のSpringでも問題ないでしょうか？
The Spring is larger and is not VSR 10 compatible
How do you adjust the cheek rest and butt stock length?
Loosen the screws on the stock
Why would you lube the externals of the bolt? It attracts dust and dirt particles. One day of playing on a dry outdoor field and your bolt's gonna be full small scratchy particles. Whole point of using a bolt action sniper rifle is to play outdoors with it.
If the pull isn't smooth then the guide rings are crap or something is scratching somewhere. They're made out of Delrin (POM) and don't need to be lubed, if they're not POM replace them with POM ones.
Lube on external parts = big no.
Might be the reason why I clean my gun after each game :D
@@4UADSmartAirsoft Lube doesn't fix the scratchy sound, it just makes it quieter.
I wonder how much would polishing the cylinder externals and replacing the guide rings help.
where do you get the music from?
Artlist.com
請問spr300跟ics戰斧 原廠狀態打遠程目標的效果更好一點？
其實目前的新玩具槍性能都不會太差有調教的情況效果都會很好。 戰斧主要是氣量大，可以做大容量的輸出同時可以安裝比較長的空氣煞車所以可以會超級安靜。但要論射程準度SPR300的hop 直覺又好調所以也很棒。總言之～～～選自己喜歡的吧哈哈哈哈😂
另一個彈匣沒附 傻眼了 哈哈
當下還真在想該如何是好
請問一下，原廠彈簧規格配置是多少的?
假設要更換改裝彈簧，原廠件可以容許到甚麼規格呢?
先謝了~哈哈
彈簧跟以往vsr10 的規格不同，原廠這組配來是m150, 如果真要升級初速建議抓在170那邊
@@4UADSmartAirsoft 請問是初速太高容易損壞零件嗎?? 需要強化什麼嗎?? 謝謝
@@4UADSmartAirsoft 請問要更換彈簧，應該買什麼規格的？ 內徑多少？ 謝謝🙏🏻
Bro i need one where i can buy one ? Link?
It’s not lunched yet I think it will be ready by July
想請問影片最後狙擊鏡的型號?
Vector optics 2-10倍鏡
这条的扳机力大概有多少？
約2-3磅不重而且可以更換零阻力扳機
@@4UADSmartAirsoft 感谢老哥回复
Silverback的41cc和Archwick的45cc差距會很多嗎? 在這兩家抉擇... Archwick也有像tac41一樣阻止上彈坡道內的bb彈掉出來的功能嗎?
有的喔!
We paid too much attention on the cylinder volume. As long as we can get 3J of energy without having to pull hard, then we just need to handle the rest of the gun (accurracy and consistency, you know the usual)
Cool looking rifle and excellent production as usual, but loading ramp... no-no from me.
haha its the only thing that gets the mag to the right place haha
You can use a normal VSR magazine in the place of the ramp. This ramp is also a nicely designed one, similar to the TAC41
@@Azukaae A super nice ramp still wastes BBs, and that's a problem. If a VSR mag can be used, that's what solves it
Where I can get one?
Contact Archwick!
兄貴、バイポットはつけれないですか？
Bi pod gets in my way :D
在我預購後看到這個影片...
好東西啊～～～妥當當的恭喜牽新玩具
拿到spr 300了，但用50發彈匣時會一直發生上不了彈的情況🥹
疑這就奇怪了~可能確認一下Hop座有沒有錯位 位置跑掉確實會卡彈喔
@@4UADSmartAirsoft 我確認了一下好像是彈匣的彈簧不夠力，其他的youtuber也有提到這個問題
@@優質熊貓 唉呦那這樣就小麻煩了,可能要強度比較高的彈簧 (說不定可以試試便宜靜音彈匣的彈簧)
@@4UADSmartAirsoft 沒事我跟廠商聯絡了，他們說把彈橋的橡膠皮拿掉就好了
Can you make a review about PTS GBBR RADIAN MOD. 1 ? Upgrades and Maintence, thanks. Nice work you do a
good job.
oh lord~ KWA Gbbrs.........:(
@@4UADSmartAirsoft Please? :)
😅
Gi mna mau order?
想請問一下，如果要更換彈簧，需要購買什麼規格的？
規格不適用vsr10,比較粗，Srs 的應該ok
Please test Target 🙏😁
Will see if we got some extra time!
Fps?
150MPS
i don't understand why they dont make a sniper rifle with a good blow back reaction
maybe they are already working on it ~
Most recoil/blowback in airsoft today is provided by bolt being pushed back by either gas or electric (EBB). Which is why it's not feasible to be implemented in bolt action rifle. Though in some DMR or semi auto rifle, you can have a little recoil
You can actually do that by having a strong spring and heavy piston. The idea is that when you release the triggger, the spring will try to push both ways. And since the piston is heavy (meaning it has bigger ineetia, it will try to hold its position stronger than normal pistons), the spring will have stronger push back (to the stock itself) than normal airsoft bolt actions.
*a part is missing*
normal people: contact customer support
4UAD: get their tools and start working 😂
hahahaha we are too impatient, we want it now!
That's why I love you guys!
Grading when 🗿
I wish we know how to do Shadow Clone XD
pls SR-25 🙌🙌
Will see what we can do!
🇧🇷😎👍
cat❤
貓咪得愛~
yap
Is that after market toilet paper?
Indeed
猫が可愛過ぎる！もっと映り込んでほしい。
Will do!
Haha😂
工具を見せるなら全く足りてませんな。
😅
Never ever lube your GBB/Spring Triggerunit
Ohhhhh snap…..
Why tho?
@@luiswen9437 During our twelve weeks of sniper training we learned that the trigger unit on a precision rifle should be as dry as possible and free of grease/oil. Otherwise dust/sand/dirt, etc. gets magically attracted and can lead to various problems. The parts are not extremely stressed and therefore do not need grease/oil.
The only thing we have used was lighter fluid. Lighter fluid leaves a minimal protective film after it evaporates, which prevents rust and as bonus it does not attract any dust/dirt/sand etc..
And speaking of airsoft rifles, especially with gas snipers and also spring pressure snipers, it is extremely important not to have grease/oil in the hop-up rubber/barrel. Even a small amount of it makes a big difference if you hit or not.
I have been using my Tanaka M24 completely dry without grease/oil for 12 years. I also only use gas without silicone oil.
@@shorty7943 Interesting, the way you explained it does make sense with real firearms. I think most airsoft guns are not made to the same standards. I would try running the trigger unit dry. But I'd still probably lubricate the piston at least.
@@shorty7943 I can understand with a real bolt action rifle most parts aren't stressed much at all. But with a spring air rifle your trigger sear is in fact under quite a bit of stress
ASMR ? XDD WHERE ? XDDDDDDDDDDD
here