Very cool. It would be cool if you also design a case for it, for when not using the cartridge, that it clicks and connects into the rest of the master sword
아니 진짜 뭘 만드신 겁니까...전생에 대장장이셨나요...마소 부분 퀄리티가 정말 좋고 게임칩으로 만드신게 너무 대단하십니다. 한땀한땀 수작업으로 하시는게 대단하시네요. 설계하신 것도 힘드셨고 납땝이랑 led 작업도 보는 내내 감탄이었습니다. 특히 led가 마소 각성한 것 같네요...수고하셨습니다! 그리고 이런 영상 감사합니다!
You did such an awesome job there, congrats! Also I wanted to add that is some awesome skills you have in modeling keep up the good work. I’m so jealous!
Looks amazing. My biggest concern though is how hot the LED gets (if it does at all, depends on the LED used and strength). Wouldn't want that to cause a problem in a insane 10+ hour gaming session....
Very cool build! Did you consider putting a button at the bottom instead of a toggle switch? So whenever you plug in the cartridge it lights up automatically? There seemed to be plenty of space for this, it's just a question of what the bottom of the slot in the console looks like.
Oh wow! 🤯 This looks incredible, literally the Master Sword as a game cart lol. I would feel uneasy using it in portable mode, but docked it looks sick! I know a few folks who’d probably pay good money for something cool like this. 👏👏👏👏👏👏
Since it's only half the sword when pulled out, you should've made the decayed master sword where the parts that light up would be the red decaying parts from the gloom/malace
This is SO AWESOME!!! 🤩 Coolest idea, turn on the light when you pull the Master Sword at the end of the Trial of the Sword, when the Master Sword glows in game.
@@Dat_Thing88 I do think it could work, for limited releases of the cartridges. Yes it may look tacky,but so does many accessories that had been built for game consoles.
@@Indykathoris It's not that it's tacky, though It's more that it could accidentally damage the inner components of the console with an impact or just holding it wrong It's a bit impractical for handheld mode But that doesn't make it any less cool
@@RF-Ataraxia true, unless the actual case for the cartridges could be detachable. Not in the way the inwards are exposed, but the cartridge would be a it's case with the ability to attach to the add on. THat way the user can remove it when they are using their device as a portable. And then attach it back as console to show off their collection. How about that?
I thought it would feed the light from the game connectors themselves as a source of energy for the light, it is amazing as it is , wish Nintendo did something similar to mario kart and others
So he has no plans to upload a download for the print file for his following? Or even a simplified file where it's not in so many pecues and made for not inserting leds?
For the STL files, refer to Saint Louis, where they originated from. You'll obtain your buttered toast there, and find what can only be referred to as ominously referential.
The off switch makes it look weird, wasnt posible to get the voltage from the console?, also was it necesary to have light? doesnt botter the eyesight while playing? other than that, its SUPER COOL
I have no idea @.@ how RUclips sent me to see your video lol But is Awesome ^.^ It’s the most coolest thing that I ever see for a Zelda game :D Greetings from Los Angeles California Greengolandia 👋🏼
This is amazing. Do you just guess at the filet radius or do you measure the physical object with a tool? I've been trying to learn to get this right and it's frustrating me!
This is very cool. Awesome aesthetic. Especially when it’s docked. Need something to decorate the dock itself now to match. Lol. Will these be for sale in any form? Or perhaps the files posted somewhere at least? I’d love to have one of these and I’m sure there’s tons others that would as well.
![오늘은 조라..? 자불 수역에서 시작~ [젤다의 전설 지혜의 투영 #03]](http://i.ytimg.com/vi/QdNEI0nWtx0/mqdefault.jpg)
![오늘은 조라..? 자불 수역에서 시작~ [젤다의 전설 지혜의 투영 #03]](/img/tr.png)
Very cool. It would be cool if you also design a case for it, for when not using the cartridge, that it clicks and connects into the rest of the master sword
or a base that looks like the base infront of the Deku tree.
I was thinking into a rock or the platform in korok forest
Any three of these are good ideas 😂
Or the sheath
A rock would be nice
That's beautiful, man. Now, this would be a collector's edition worth paying for.
대박... 개이뻐요 칼 앞부분도 따로 메모리 보호되게 끼우는 형태도 만들어서 완전체 칼모양 만드는것도 겁나 좋을거같아요ㅋㅋ
칼집!!! 후하후하
저런 거 정식으로 내주면 좋겠다
이거 쓰러 왔는데 이미 있네욬ㅋㅋㅋ 추가컨텐츠로 만드시면 너무 좋을것 갘습니당
아니 진짜 뭘 만드신 겁니까...전생에 대장장이셨나요...마소 부분 퀄리티가 정말 좋고 게임칩으로 만드신게 너무 대단하십니다. 한땀한땀 수작업으로 하시는게 대단하시네요. 설계하신 것도 힘드셨고 납땝이랑 led 작업도 보는 내내 감탄이었습니다. 특히 led가 마소 각성한 것 같네요...수고하셨습니다! 그리고 이런 영상 감사합니다!
So cool! I loved how you showed the time-lapse process of the 3d modeling! The final result looks amazing!!!
세상에나 메모리칩이 저렇게 작다는 거 첨 알았네요 ㄷㄷ
비모님의 만들기 시간은 언제나 고퀄 엔딩...
SD카드만 봐도 저거보다 한참 작죠...
어릴때 tt r4 안써보셨나 ㅋㅋㅋㅋ
@@어기어기어라챠 자랑이노 ㅋㅋ
@@ho2874 ㄹㅇ 어릴때는뭐 몰라서 썼다해도 대가리크고나서 저러는거는 진짜 ㅋㅋㅋ
@@ho2874 그땐 다 그랬지 뭐
와아.... 이거 ㄷ량 생산이 시급하다구요ㅠㅜㅠㅜㅠㅜㅠㅜㅜㅠㅜㅠㅠㅜㅠ 너무 예쁘다아아악
진짜 젤다팬이 보면 저거 사고 싶어할 것 같아요 정성스런 제작과정 진짜 대박입니다.
ㅇㅈ
진짜 고퀄이네요
손잡이 부분은 끈 색 먼저 도색하고 그 부분만 마스킹테이프 붙이고 파란색을 뿌렸으면 비모님이 더 편하지 않았을까 하는 생각이 드네요
취미로 이거 저거 만드는 사람으로서 항상 얇은 부분 붓으로 도색하면 눈이 아픈 걸 공감하기 때문에ㅠㅠㅠ
담부턴 그래야겠어요 ㅠㅠ
You did such an awesome job there, congrats! Also I wanted to add that is some awesome skills you have in modeling keep up the good work. I’m so jealous!
우와.... 이번건 진짜로 팔아도 될정도로 퀄리티가 높은것 같아요..!!! 김비모 10만 가즈아!!!!
진짜 믓찌다 김비모 센세... 만들기 하실 때마다 놀라 자빠집니다
absolutely beautiful master piece of artwork…well done!
I see what you did there
発想と技術が凄すぎる
カッコイイ！
寝落ちしてポッキリ行きそう笑
Amazing work! It's so cool that Hyrule will never be the same!
미친 퀄리티의 한정판 칩이 되었다.
Looks amazing.
My biggest concern though is how hot the LED gets (if it does at all, depends on the LED used and strength). Wouldn't want that to cause a problem in a insane 10+ hour gaming session....
Very cool build! Did you consider putting a button at the bottom instead of a toggle switch? So whenever you plug in the cartridge it lights up automatically? There seemed to be plenty of space for this, it's just a question of what the bottom of the slot in the console looks like.
You would have to eject the game every time you're finished playing else kill the battery. Then you are rebooting the game every single time you play.
역시 마소를만든 태고의여신은 비모님이셨어..
성전환?
여?신
TS?!?!
ㄴㅇㄱ
김파이..(?)ㅋㅋ
Oh wow! 🤯 This looks incredible, literally the Master Sword as a game cart lol. I would feel uneasy using it in portable mode, but docked it looks sick! I know a few folks who’d probably pay good money for something cool like this. 👏👏👏👏👏👏
You can use a switch case
This is absolutely epic! I can see this being sold at Forbidden Planet London for a fancy premium, truly a work of art 👌🏼
이런 제품 실제로 팔아주면 안되나? 겁나 갖고싶다...
もちろん駄目です
젤다를 사랑하는 사람입니다. 지나가다 들렀는데 눈을 뗄 수가 없네요!!! 완전 금손이시네요~ 예술입니다!
Wow thats amazing looking! You are so creative ❤️
대박...이걸로 공식 굿즈를 만들어도 되겠어요 ㄷㄷㄷ
닌텐도 비모 에디션 나오면 좋겠다.
닌텐도 비모 에디션:384000원
창작은 진짜 어렵죠 ㅠ 그래도 진짜 너무 멋있고 퀄리티도 상당한것같아요 ㅋㅋ 고생하셨어요!!
와 미쳤다....ㅠㅠㅠ 상상을 초월하시네요 항상...
실력도 실력인데 아이디어가 진짜 너무너무 귀함... 귀하다는 표현밖에 할수가 없을 정도로 귀한 아이디어인듯 김비모 도대체 모하는 사람인가.
우리 교수도 님처럼 말좀 해줬음 좋겠다 에휴
oh my god, if you start selling these, you would instantly be a millionare
発送もデザインもそれを実現してしまう技術力全てに感服😍✨
うん!
이건 진짜 공식 굿즈같은걸로 마스터소드 usb같은거라도 나오면 좋겠다.
すごい…本当にかっこよすぎる。神過ぎる…！！
What 3D software do you use? Also, why didn’t you print the parts flat?
I’m also trying to figure this out, blender has been tough to learn
진짜 유튜브하면서 좋아요 처음 눌러봄 진짜 개멋있다
Since it's only half the sword when pulled out, you should've made the decayed master sword where the parts that light up would be the red decaying parts from the gloom/malace
This is botw though not totk
Oh my gosh ! That's so amazing, dude ! Congrats !
저거 보관 용기로 엑스칼리버 처럼 바위에 꽂아두면 멋있을거 같아요!👍
이번 영상 미쳤다 칩을 개조한거 뿐만 아니라 틈새 얼공까지ㄷㄷ 이번영상이 진짜 미쳤군요
우와.. 이번꺼 너무 탐나는데요
칩에 저렇게 꾸미실 생각을 하시다니
역시 비모님 🫢
임이 딱 벌어져서 구독을 눌렀습니다. 어떻게 그렇게 신중하실수가 있어요... 존경하고 또 이런 컨텐츠 만들어 주세요.
들고 하기엔 무리여도 독에 연결해서 쓰면 감성 뒤지겠다 ㄹㅇ 잘 만드셨어요!
처음부터 끝까지 봤는데 정말 고생고생 이런고생이 없다.... 그치만 결과물은 너무 이쁘고 멋있어요!! 금손이신듯
You should make one for ToTK that looks like the decayed master sword from the start of the game
かっこいいしすご、うらやましって思ってたけど
……思っていたよりもでかいｗｗ
観賞用かなもし持っててもｗ
This looks so good! Amazing work!
세상에 이런 마개조를 ㅋㅋㅋㅋㅋ큐ㅠㅠ
시청 후) 와 퀄리티 찐이네요... 저거 진짜 닌텐도에서 비모님 모셔가서 팔이도 손색없음
Wow you got the basic master sword design done in 2.5 hours, that definitely would’ve taken me at least 6 😅
This is SO AWESOME!!! 🤩
Coolest idea, turn on the light when you pull the Master Sword at the end of the Trial of the Sword, when the Master Sword glows in game.
Brilliant design. If only nintendo could design their cartridges like that for limited releases.😊
Just think for a moment, please.
@@Dat_Thing88 I do think it could work, for limited releases of the cartridges. Yes it may look tacky,but so does many accessories that had been built for game consoles.
@@Indykathoris It's not that it's tacky, though
It's more that it could accidentally damage the inner components of the console with an impact or just holding it wrong
It's a bit impractical for handheld mode
But that doesn't make it any less cool
@@RF-Ataraxia true, unless the actual case for the cartridges could be detachable. Not in the way the inwards are exposed, but the cartridge would be a it's case with the ability to attach to the add on. THat way the user can remove it when they are using their device as a portable. And then attach it back as console to show off their collection. How about that?
@@Indykathoris That could work, not very practical because you'd have to close the game and everything just to go handheld, but it could work
이런분도 처음다루실때 어리버리 하셨겠지... ㄷㄷ 멋지다...
Very cool build. Personally, I would have preferred if the light and lightswitch were built into the handle, but that's not really a big deal.
젤다에 진심인분… 이걸 처음 본 저는 문명화가 안된 느낌을 받았어요 ㅋㅋㅋㅋㅋ 제장과정부터 완젼 멋있어요!
딱딱 들어맞는걸 보니 제작자도 아닌데 희열감이 느껴진다
오늘도 좋은 영상 감사합니다!!!! ㅎㅎ
보고싶었습니다!!!!!
スゴすぎる…
売って欲しいぐらいの完成度
LED 스위치 위치가 칩을 꼽으면 자동으로 밀려 올라가게 위치하면 진짜 퀄리티 좋을 것 같아요~!
와......................할말을 잃었.. 갖고 싶네요....💙
(엄마 몰래 스위치를 살까 고민중인 동시에 기종을 뭐로 사야 적당히 저렴한 가격에 살지 고민중.)
7:10 공감 100%
엄마한테 효도해라
@@Orangbarry 너무 맞는 소리여서 반박 못하겠네
엄마 설득해서 사 몰래 사지말고
@@Orangbarry ㅇㅇ 그래야겠다 나 지금 과제에 치여사는데 엄마 등짝스매싱까지 맞으면 골로 갈듯.
@@백산-kzh 용서가 더 빠른거 알지? 응원할게
진짜 레전드에요 마감도 넘 이쁘고 매끈하니..군침 싹..스카이 워드 에디션 완벽해요 넘모 갖고싶다!!!!
???: 마스터소드는 한 명 밖에 못 뽑는다고? 그럼 만들면 되잖아?
Oh man so amazing, I wish I had your skills and your patience to do that but I really enjoy it. Amazing thank you for sharing the video with us.
That truly is an amazing piece of craftsmanship! I'd be honored to own a piece like that. It is just so stunning.
Would you mind sharing the fusion files? Or the measurements so i can do it myself? Please, this turned out amazing 🙏
닌텐도에 꽂을때 얼굴이 살짝 비춰요...!
썸내일보고 뭐지 하고 보니까 탄성이 절로나온다
이분 알고리즘으로 떠서 봤는데..
제가 아는 머기업의 어떤 3D펜 장인분과 대조되는 초 극한의 정성추 스타일이시네요.. 그분도 정성츄로 만들긴 하는데 여기는.. 애정이 없이는 아예 시도조차 못하는걸 만들어 내시네.. 구독 씨게 박고 갑니다..
알고리즘에 이끌려 찾아왔는데 공작실력이 대단하시네요! 구독박고 앞으로도 응원합니다
Ya quiero que salga el tears of the kingdom 🤩🤩🤩🤩
이건 대단하다는 말 밖엔... 입이 안다물어지네욤.
정말 대단하신 분...
드디어! 기다리고 기다렸어!!! 얼마 안있으면 왕눈이.. 그나저나 개잘만드네 역시 금손ㄴ
I thought it would feed the light from the game connectors themselves as a source of energy for the light, it is amazing as it is , wish Nintendo did something similar to mario kart and others
와 스위치 부속품 중에 이게 제일 찐광기인듯..
진짜 최고다
Would it be possible to get download files for this?? I'd love to print one!
비모님 이시간에 영상을 업로드하시다니 도대체 어떤 세계에 살고 계신겁니까 어쨌든 봅니다.
미쳤다.. 이걸 생각해내는 센스도 만들어내는것도..
Awesome idea and quality built. Looks amazing. The crisis core buster sword would look good I think also.
와 너무 오랜만이에요 ㅠㅠ
Dont forget to apply the bittering agent for that OEM switch cart taste.
보는내내 감탄만 했습니다. 내 젤다도 저렇게 만들슈 있음 넘나 좋을거같아요 특급금손!!
So he has no plans to upload a download for the print file for his following? Or even a simplified file where it's not in so many pecues and made for not inserting leds?
혹시나 역시나 당신은 선물입니다. 또 다른 무기를 장착하시고 새릅게 거듭나고 있군요. 응원하며 감동스럽습니다.
This is awesome! Do you have the STL files for release or for sale?
For the STL files, refer to Saint Louis, where they originated from. You'll obtain your buttered toast there, and find what can only be referred to as ominously referential.
기다렸다우... 젤다 왕눈이도 기대되네요!
장이시여.. 드디어 본업으로 돌아오셨군요
23:17 농협은행ㅋㅋㅋㅋㅋ넘흐옙흐네요ㅋㅋㅋㅋㅋㅋ
Incredible. Would you be willing to share the print files??
Wow, this video is amazing! The final result was incredible! Good job! Loved it!
The off switch makes it look weird, wasnt posible to get the voltage from the console?, also was it necesary to have light? doesnt botter the eyesight while playing? other than that, its SUPER COOL
Amazing!!! Really cool that you made all the stuff yourself. Love Zelda too
I have no idea @.@ how RUclips sent me to see your video lol
But is Awesome ^.^
It’s the most coolest thing that I ever see for a Zelda game :D
Greetings from Los Angeles California Greengolandia 👋🏼
오늘 처음 봤는데요...엄청나네요 일단 그것 보다 꺼진 닌텐도 화면에 비친 김비모님 얼굴이...
This is amazing. Do you just guess at the filet radius or do you measure the physical object with a tool? I've been trying to learn to get this right and it's frustrating me!
Always measure if you can, guessing is only guess as a last resort and usually be ready for alot of trial and error
비모님 살아계셨군요!!
This is very cool. Awesome aesthetic. Especially when it’s docked. Need something to decorate the dock itself now to match. Lol. Will these be for sale in any form? Or perhaps the files posted somewhere at least? I’d love to have one of these and I’m sure there’s tons others that would as well.
스위치화면에 반사되서 비보님 얼굴이 조금 보이네요 역시 존잘이심
Maybe I’m wrong, but couldn’t you model a piece in a different software and then import it to fusion 360 and scale it correctly?
오랜만에 등장이군요 덤으로 뛰어난 창작을 할수있는분에게 박수를
비모님 언제나 폼 미쳤다.. ㄷㄷ
개쩐다 진짜
Bro do you realize that almost any Zelda would sell their soul to have something that cool 😭😭