I love, love bracelets so I went online & ordered loads of cord after watching this video. I am working on the 1st tutorial, I will move on to the 2nd once I have watched it again. Thank for sharing this super cool video - a very delighted Londoner, x
i woke up today wanting to make a bracelet and then i saw this tutorial! i made the first one.. love it :) thanks for the tutorial! i want to note that the curb chain should be a little longer than the rhinestone chain because they got shorter as i was threading them w/ the rhinestones (since the spacing of the stones were closer than the spacing of the links).
the chains have jump rings attached at the top of them and jumprings/lobster clasp at the end.use the cord to tie the two jump rings at the top together.your cord should now be in two 'sections' seperated by the knot.the short end should only be a few inches long at the most,ignore that strand.the second part should be the rest of the length.start on the left chain going under and up the 'hole' the chain had then go down and through the 'hole' of the second chain and repeat. hope this helped :)
I don't recommend tape for this particular project. The best method (for me at least) is holding the chains up, otherwise the chains will turn. Something better than tape is to use a clip board ;)
I would use twist-ties that are usually on bread bags or string to tie the bracelet off in sections so that it doesn't twist while I make it. This could also make it easier to hold the chains together.
LOVE!! Just saw I Spy DIY on a rerun of Martha yesterday (which means she'll prob be on today too!) & she talked about her bracelets. Some chain is going to make/sell them, I think.
I made the first bracelet and I absolutely love it but i did have to use some superglue.. one tip is while making the first one, always keep one hand (thumb and pointer finger) holding the top jewel:) also getting the knot at the bottom is a bit difficult
Thank you sooo much for the tutorial and exact materials and where to buy them from! :D other pple dont do tht,and it makes it difficult to get the exact look withoutthe samematerials. Thanku a ton, im going to try both of these soon too! :))
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
these are beautiful!!!! The second one is my favorite!
I love the blue bracelet!!
i am soooooo obsessed with your bracelet DIYs, they are always so beautiful!
omg yes! i get the urge to be crafty and make things over the summer, so I'm really glad to have found this!
it's so gorgeous but I'd never do that as pretty as you do! just wow. respect.
I love, love bracelets so I went online & ordered loads of cord after watching this video. I am working on the 1st tutorial, I will move on to the 2nd once I have watched it again. Thank for sharing this super cool video - a very delighted Londoner, x
I get them from all the stores I listed below the vid =)
I am about to go craft store crazy tomorrow!! I enjoyed both tutorials.
yes... I've seen them in both store. Sorry if it didn't seemed clear. It was b/c the methods were very much alike to the first. =)
I really love how these look, hopefully mine will come out the same
Do the same thing, it's like a mirror image. You can also flip it over. Just remember under-out, over -in.
Yes I did, I said it's the same thing as the first side I demonstrated. I didn't think it made sense to show the same thing again.
i love the 2nd design..it looks soo cool!
it's difficult to hold the chain in a steady position but the lacing is very easy to do ;) materials are on the bottom of the videos =)
i absolutely LOVE your DIY's please continue to upload videos of DIY's !
i woke up today wanting to make a bracelet and then i saw this tutorial! i made the first one.. love it :) thanks for the tutorial!
i want to note that the curb chain should be a little longer than the rhinestone chain because they got shorter as i was threading them w/ the rhinestones (since the spacing of the stones were closer than the spacing of the links).
for the chains to stay in place and not get mixed or out of shape, it's better to hold the up and have the fall down.
I LOVE YOUR BRACELET DIYS
My cords do shed. You see it more with the darker colors. It's going to happen when you're weaving but after that it wll stay put.
yes... it's like looping around :)
Love the first design!
Gorgeous bracelets and a wonderful tutorial too. Thank you. Lee x
They are really cute... they seem easy to make......i find that the tutorial was really good.
oh i love it..gotta go to Michael's now. You make me get into fashion and arts and crafts!!
the chains have jump rings attached at the top of them and jumprings/lobster clasp at the end.use the cord to tie the two jump rings at the top together.your cord should now be in two 'sections' seperated by the knot.the short end should only be a few inches long at the most,ignore that strand.the second part should be the rest of the length.start on the left chain going under and up the 'hole' the chain had then go down and through the 'hole' of the second chain and repeat. hope this helped :)
You have insane talent girl!
Those bracelets look so unique! :)
gorgeous!
Thank you Anne for this wonderful DIY! I really enjoy your videos and seeing you post them makes me happy. :D
this is super cute yet easy love it
Love the bracelets; I made the first one and it turned out nice. Love ur videos.
yay a different take on friendship bracelets !!
Love bracelets!!! Love it! Gonna do!!!
omg just in time im going to take a trip to Michaels tomorow and save soo much money on my back to shopping
I wanna make this! They are so adorable!
You are the best!!! thank you so much !!! Greetings from Greece!!!
I swear i love ur tuts sooo much! They Always work so well for me and theyre so cheap to make. Love u Ann xoxo :)
I love both designs
I love these! Will definitive makes these bracelets!
Best tutorial! It's so easy to follow! Thanks!
a good tip to help keep stuff staying still is to tape the top part of the bracelet to something like a table :)
this is sooooooooooooooooo hard to do. but, oh well, practice makes perfect!
YOU MAKE THESE PERFECT I LOVE THEM
i absolutely love your diy videos! keep them coming!
More bracelets tutorials :D I just love them, you're so creative ! big thanks from tunisia :))
I tried the second one it was really hard haha I don't know how yours turned out so perfect
those are both beautiful!
yes =)
i love it. it seems so easy to do.. can't wait to try it. thank you for the videos! huge fan
You do the same thing over on the other side. It's the same method on both bracelets. =) have fun!
I don't recommend tape for this particular project. The best method (for me at least) is holding the chains up, otherwise the chains will turn. Something better than tape is to use a clip board ;)
they're listed below the video ;)
I would use twist-ties that are usually on bread bags or string to tie the bracelet off in sections so that it doesn't twist while I make it. This could also make it easier to hold the chains together.
Just finished the first one I love it :)
Brilliant! Thanks for putting this up.
That's gorgeous!
YOURE SO AMAZING ANNE!
I made this and I get so many compliments! my mom wanted me to make one for her c:
I love these.. I can't wait to try them out 😁
Awsome Bracelets!!
Its so very wonderful and creative❤❤❤ It really helps me!!!😊😊😊
I absolutely love your videos especially de DIY ones :) you are so creative and inspiring! love your videos and your style :) you are just gorgeous!
place it against your chains and wrap it like in the video, then cut off the extras with a scissor
I can't wait to try this!! Thanks
LOVE!! Just saw I Spy DIY on a rerun of Martha yesterday (which means she'll prob be on today too!) & she talked about her bracelets. Some chain is going to make/sell them, I think.
I wish you had a store of your own and just sold the things from your DIY videos :)
I made the first bracelet and I absolutely love it but i did have to use some superglue.. one tip is while making the first one, always keep one hand (thumb and pointer finger) holding the top jewel:) also getting the knot at the bottom is a bit difficult
OMG that's seems really simple I'm gonna have a try !!
Love this! I'm gonna make one my my friend for Vday!
Its good to pin the beginning to your jeans for example, it´s more easier :)
Loved this DIY, so creative!!!!!:)
So pretty!
they should fit around your wrist, everyone is different in length =)
So pretty!💖❤️💖
thanks! canon 7d =)
Great DIY,Love it!
queda muy linda y además muy fácil de hacer, gracias por tu tutorial. Saludos
Thank you sooo much for the tutorial and exact materials and where to buy them from! :D other pple dont do tht,and it makes it difficult to get the exact look withoutthe samematerials. Thanku a ton, im going to try both of these soon too! :))
Love! Going to make my own thanks for showing :)
I love these bracelets:)
Wonderful as always!
i loove you DIYs thats why i suscribed!
i learned how to do this in my summer school but without the rhinestone chain (thanks for reminding me how to do it
very cute chains
GORGEOUS!!! why all the advertisement comments??????
Please more lookbooks!! I miss it :(
So cute!!! Hahah I wanna try to make this now!
we a sweet little bracelet :) thanks for sharing
I lived it, its perfect!
thats beautiful !
very cute bracelet!
Hi Anne,
Great video, will be sharing this on the I spy diy skillshare class.
Helen
I love them!
im gonna attempt this but it looks kinda hard!but really pretty
i did the first one! it's great! thanks for the tutorial :)))
merci beaucoup très joli bracelet !
So cute!!! I saw bracelets just like this online that I loved for 80 bucks!! Definitely trying this! Ur the shit Ann
This one is so pretty :) thank you so much :)
This is really nice!
Love these can't wait to try them :)