70 Years Old Anvil Restoration | Restoring Antique ANVIL
HTML-код
- Опубликовано: 14 сен 2021
- Hello. In this video I restored Rusty Vintage ANVIL
If you like our work Don't forget to subscribe, comment and like.
#Restoration #blacksmithing #Restoring 
Хобби
Thank you for 100k subscribers 😍😍😍🤩🤩
Надо до милиона набрать, хороший реставратор, видно что с удовольствием делом занимаешься! Удачи!!!
Поздравляем, брат, в пути к миллиону!
Keep on doin' your thing, man!
No problem
congratulations buddy
Turned out really nice! Looks like a lot of kids learned how to weld using that anvil!
Great job! A couple of comments from an ex-blacksmith if you don't mind.
One, the stump has to sit perfectly flat and the anvil has to sit perfectly flat on the stump.
Two, I'd rather have a perfectly flat face on the anvil than a polished one.
Keep up the good work, and buy some boots! 😁
I saw a lot of times, that there is a chain in the anvil; lik in this case, can you tell me why?
@@o.sz.a.2128 It stops the anvil from ringing. That noise can be very annoying after a few hours.
@@johnthemainguy9059 thanks :)
Anvil from the USSR, I have two of these))
I appreciate how you used different techniques to remove the rust.
nice work, but I think the anvil sits too low, it looks like you were bending over while hammering. And since the surface of the anvil isn´t smooth, I would prefer something like Hammerite as paint.
Am glad to see you are SICK enough to create such a work of art. GOOD JOB SIR !!!!!!!!!!!!!!!!!!!!!!!!!!!!
All those sparks with no gloves or sleeves dude is bold
nice and stout, especially the horn. you prettied that up real nice
Wow that's simply beautiful.. looks VERY GOOD 👍🏼👍🏼
Awesome 👍😎👍😎👍😎👍
Nice Work 👏👏👏👏👏👏👏
Very nice work nice to see it live again Lee
Красавчик, с меня подписка
C O O L !
Need to patch up some blue holes by welding need more finishing touches any how good work
Some ages to be need more finishing
Tnx for your video
NOT BAD FOR A ROOKY...... Got a lot to learn but you're getting there
A good bed of silicone would take a lot of the ring out of it. Nice find and restoration!
Great job on old anvil restoration antique bl restoration 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰
More likes deserve such quality💕
Felicitaciones por el buen trabajo, 🇵🇪 rescataste del olvido una herramienta indispensable en un taller de herrería
What is the chain for?
Цепь гасит звон при ударах об наковальню.
I loved the fact that you shielded our eyes from the welding flash but also surreptitiously advertised your brand in the process creative thinking like that will get you everywhere ..lol i will be back i subbed
Shielded our eyes? You can't be serious...
От громкого звона магнит помогает.
A lot of work but we'll worth it. Thanks
Gut gemacht, Junge, gute Arbeit, um es aufrecht zu bekommen.
Ковадло получилось супер👍
Superb restoration, image they conversations that have happened around that anvil since it was first made, would be interesting if it could talk 😊
Excellent job guys that is really sweet
Cool project 👍 and beautiful result, like it 👍
Tank you from the Brazil
That's a Russia cast steel anvil sold by harbor freight 20 years ago. Got three of them in trades over the years.
If you put a rubberized caulking on the bottom of the anvil it it'll help stop the ringing
Well Done!
Voilà une belle restauration.👍
Bem trabalhada 👍👍👍👏👏👏👏🇧🇷
Al pintarlo la habéis cagado !!!! Con lo bello que es el acero reluciente
Very good boy
Good job mate.
amazing workmanship well done what was them sanding pads you were using 👍
👌
Тебе нужно больше подходящего инструмента
I read that bar magnets stuck to the sides of the base middle and the underside of the base reduces vibration/ringing.
Cái đe vết thời gian rất đẹp - tự dưng làm hỏng và xấu đi
Làm để đưa vào tủ bày à
really good job on the restoration of that anvil
Wonder how many grinding discs he went through
looks like a possesed anvil to me..... they even put chain like those were put there to seal the demon inside.
joking hahahhhaa
great video man.
Should've spent more time on the base. Like making a new one. Putting a chain around in was good. One thing that you didn't do was secure the anvil to the stand
What does the chain do?
How much weight was removed?
$100? Lucky you
Really Amazon Brother. Enjoyed alot. Congratulations on 100k. Best Wishes From Mister Family.
More subscribers ♥ ️ ♥ ️
👍
how much is iit worth now?
slay
Why would you put your logo over the spot welder?
What's the chain for? Bling?
for tuning the sound of the anvil
A question. Why is it very often around an anvil either a large chain or a (motorcycle) chain or the same as here wrapped around and attached to the anvil? Is there a special reason for this? I would be happy if someone could help me in this regard and give the reason provided there is a reason ... I thank you in advance
//////-/////
Eine frage Und zwar warum wird sehr oft um einen Amboss entweder größe Kette bzw. wie hier eine (motorrad) Kette oder der gleichen um gewickelt und am Amboss befestigt ? Gibt es einen besonderen Grund für dies? Würde mich freuen wenn mir jemand diesbezüglich helfen könnte und den Grund nennen vorausgesetzt es gibt ein Grund... ich bedanke mich im voraus
it adds to the overall mass of the anvil. The more mass the better absorption of the hammer blow. The ring and rebound of the hammer on the anvil means that energy is being sent back into the hammer rather than being placed fully into the anvil or the object that you are trying to forge. This is why many people attach an anvil to something like this video did. The reality with this video, is that they would benefit from using a rubberized caulk in addition, as it creates a better connection of the anvil to the other mass, and that rubberized material will also absorb the blow rather than sending it back up to the hammer.
@@kdkrueger112 Thank you, my friend, for your clarification, it is informative and now I understand it too, since I never had to deal with this type of matter, that really interested why and why that with the heavy chain etc. again, thank you very much, it was nice of you enlighten me ... see you then
Взяли хорошую наковальню, поиграли по ней сваркой, облили солёной водой, подержали неделю в сырости и пи@ец - восстановили они, дурить народ ума не надо
Silicone the anvil to the stump, it will take the ring out
You should’ve used a 7018 rod instead of that crappy 6011.
I call that a clean up ! Not a restoration. Good job on saving that old anvil.
1
para restauración se quedo corto le falta muchísimo trabajo de restauración sol sacaste el oxido y pintaste nada mas y todos los huecos del metal los tapaste con pintura no es buen trabajo
100 dollars great find not in the US, Cost way more than that here
I picked one up for a hundred bucks a month ago.
Why did you do all that work jest to pant it
Где можно такой достать
И похер, что дыра на плоскости
Restoration is not satisfactory The top hammering portions edgeas are not been set right it is very bad
🤪🤮
What is the chain for?
What is the chain for?
for tuning the sound of the anvil