@@TSGReelService sure , I will. My penn reels are still working. I could not get some parts, so I had to make them . That was fun though. Greetings from Germany .. Jan 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👋👋👋👋
Hello, I have just discovered your channel and I really enjoy the videos, the professionalism, the form of the work and the thoroughness. I have such a roller model 10500, its drag is very weak in terms of the clicker, I wanted to please ask is there a way to replace the clicker in order to be noisy when a fish is caught and not as quiet as in the original ? Thanks in advance
Welcome and thanks for watching. Check out the part of the video where I break down the drag. Clean out the ridges in that plate thoroughly and add a very thin coat (a lot less than you see when you first open it) of grease.... the clicker will be louder.
Very good the last video on the spin fisher when you didn't touch the drag did you ever find out why there was a grinding with the drag locked all the way down because my real is doing the same thing
Thanks for watching.... I'd prefer to do it that way.... sometimes, they even come from the factory with pieces missing or incorrectly put together..... always good to double check and set it up the way you like. Note, it may void the warranty if you do. More vids to come.
i have a penn 8500 and the screw that holds the line roller, was damaged from previously attempting to remove. How do i remove it? so i canreplace with a new one.
Thanks for checking out the video. I have a trick for that situation in one or two of my other older version Spinfisher videos, but don't remember which one. Check my video library for it.
Hey buddy a slight problem i have with my Spin fisher v 9500, when i open my bail arm it dose not stay open i literally have to open it and put some effort to get it to remain open. what could be the issue
Hi, can you make video showing the problem so I can see what's happening when you do it? Do it a couple times slowly from different angles. You can post the link to your video here so I can check it out. Thanks.
Thanks for watching. If something isn't working properly, then everything is not correct. Take it apart and put it back together again. Make sure you're not missing any parts.
Hello sr, iam looking for a new drone fishing reel with enough line capacity. Actually iam using an okuma Surf 8k and it woobles everywhere when iam getting the line 400meters...this Penn reel will be woobles too? Sorry for mi english have a nice day and thanks for your time
Hello bro! In your opinion, what is the best reel for big, very big tuna, sharks, marlins up to the price of $ 300? Penn spinfisher V 10500, VI 10500, Slammer III 10500, Quantum cabo 120, daiwa bg 8000 ?? If you know any more, please let me know.
Thanks for watching! There's a little misnomer there.... if you're going after very specific fish, especially in that range.... best to get what has proven itself... a Twin Power and not worry about the cost.
How do you stop that slight rotor back play after servicing..? my slammer dose it as well now. Ive put it all back together write.? cheers:). Tackle advisors had the same problem as well.:)
Thanks for watching! I'm assuming you put it back together properly and I'm guessing he (Tackle Advisors) also checked the following things..... but the cause can only come from a few places.... the rotor nut (make sure it's set), the opening in the rotor where the pinion gear goes through (if there's wear in the corners or edges, it can allow for some initial "slippage" as it "locks" into place during the transition from from spinning to stopping and vice versa - rotate the rotor back and forth by hand to check), or, the likely culprit... the anti-reverse clutch (could be worn and need to be replaced). The little cylinders in the a/r clutch ride in a plastic housing that can wear over time.... think of trying to reshape a plastic straw after chewing on it. This slight back play isn't necessarily detrimental to the performance, but I'd keep a replacement a/r clutch assy on hand, if I were you. Hope this helps. Keep me posted.
Forgot to mention the gears... hold the rotor and gently turn the handle back and forth.... if there's significant play, the gears are probably worn... you could try shimming the main gear, but that won't always work... the MG and PG should be replaced.
@@TSGReelService Thanks heaps for your reply. There is some movement where the anti-reverse fits into the hexagon shape body. My spinfisher has only ever been used once. I don't know why that one would have play in it as well. I'm guessing its the same problem. My slammer has done a bit of work, not much though. The a/r clutch inside seems good. There is no movement. But there is movement in where it sits into the body.
@@TSGReelService How do you set the rotor nut?? It looks like there is a lot of play just where the rotor nut needs tightening. The gears should be fine because it hasn't done all that much work?
You're welcome and no worries. All those things could affect the rotor play. Not necessarily one in and of itself, but one magnifying on top of the other. Like I said before, the overall performance of the reel shouldn't be significantly affected.
Hello, When you rotate the reel at 6:22 min I hear an interesting noise. Sounds like reel brake. What is the reason? I have same reel and yesterday I have heard this noise but I cant find the reason. Please help me. Thank you.
Thanks, I have checked, but my spring is okay, it is not damaged, not broken. And I hear the noise only rarely not always. What is the function this part? Because in the smaller SSV reel you cannot find this unit.
Appreciated the video content? Want to show some love?
Hit the Thanks button under the video
or hit up my PayPal tip jar:
PayPal.Me/TSGReel
Well done the only thing you forgot to disassemble was the paint. Thank you I learned a lot
Lol thanks for watching! It's been a long day, so I appreciate the humor! More vids to come!
Very helpful, i have 8 of these bad boys. Thank you sir.
You're welcome and thanks for watching! Check out my other vids and let your friends know about the channel.
Awesome job 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks for watching! Let your friends know about the channel.
@@TSGReelService sure , I will. My penn reels are still working. I could not get some parts, so I had to make them . That was fun though. Greetings from Germany .. Jan 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👋👋👋👋
Great video. I had three of them thank you
Can you please make a video on Penn Spinfisher V 7500 thank you very much
Thanks for watching! More vids to come.
Will do, if one comes across the table and I have time for a full breakdown.
Great video
Thanks for watching! More vids to come. Spread the word about the channel.
Je viens de le commander pour la pêche du silure hâte de voir se qu’il vaut
Thanks for checking out the video! Good luck with the reel. Spread the word about the channel.
Hello, I have just discovered your channel and I really enjoy the videos, the professionalism, the form of the work and the thoroughness. I have such a roller model 10500, its drag is very weak in terms of the clicker, I wanted to please ask is there a way to replace the clicker in order to be noisy when a fish is caught and not as quiet as in the original ? Thanks in advance
Welcome and thanks for watching. Check out the part of the video where I break down the drag. Clean out the ridges in that plate thoroughly and add a very thin coat (a lot less than you see when you first open it) of grease.... the clicker will be louder.
@@TSGReelService THANK YOU !!!
You're welcome.
Very good the last video on the spin fisher when you didn't touch the drag did you ever find out why there was a grinding with the drag locked all the way down because my real is doing the same thing
Thanks for checking out the video. I'll need more info than that. It would be in the video. Go to it and comment with the time stamp. Thanks.
so whats the trick in putting the spool back on? I screwed something up putting it back on and now I have no drag..help...
There's no trick to putting the spool back on. Just line up the keyed metal washers with the shaft. Is your issue with a 9500ss or 9500ssv?
You mentioned something about a roller break
Hi, see the last response. Thanks.
Hello. Disassembly and lubrication of the new reel after purchase should be done immediately ? Or is it still blurred by the manufacturer?Thanks
Thanks for watching.... I'd prefer to do it that way.... sometimes, they even come from the factory with pieces missing or incorrectly put together..... always good to double check and set it up the way you like. Note, it may void the warranty if you do. More vids to come.
@@TSGReelService Thx for answers. Maybe you can make main gear and pinion gear from stainless steel ? :D
Hm, in ssV ball bearings not fixed by screws in frame like in ssVI ?
i have a penn 8500 and the screw that holds the line roller, was damaged from previously attempting to remove. How do i remove it? so i canreplace with a new one.
Thanks for checking out the video. I have a trick for that situation in one or two of my other older version Spinfisher videos, but don't remember which one. Check my video library for it.
Hey buddy a slight problem i have with my Spin fisher v 9500, when i open my bail arm it dose not stay open i literally have to open it and put some effort to get it to remain open. what could be the issue
Hi, can you make video showing the problem so I can see what's happening when you do it? Do it a couple times slowly from different angles. You can post the link to your video here so I can check it out. Thanks.
Where do you buy the replacement parts for repairs?
Check mystic parts.
Hi what do you not use the Cals grease on the internals of the reel ? Thanx
I use it mainly for drag washers, but you can also use it anywhere else you would add grease in a reel.
Thnk you :)
@@philproud7254 No problem.
I dont understand everything is correct with my bail but I get no sound. It doesnt even open up all the way.
Thanks for watching. If something isn't working properly, then everything is not correct. Take it apart and put it back together again. Make sure you're not missing any parts.
Hello sr, iam looking for a new drone fishing reel with enough line capacity. Actually iam using an okuma Surf 8k and it woobles everywhere when iam getting the line 400meters...this Penn reel will be woobles too? Sorry for mi english have a nice day and thanks for your time
Thanks for checking out the video! These are solid reels and should serve the purpose you seek if you take care of it.
An Alvey reel
Hello bro! In your opinion, what is the best reel for big, very big tuna, sharks, marlins up to the price of $ 300? Penn spinfisher V 10500, VI 10500, Slammer III 10500, Quantum cabo 120, daiwa bg 8000 ?? If you know any more, please let me know.
Thanks for watching! There's a little misnomer there.... if you're going after very specific fish, especially in that range.... best to get what has proven itself... a Twin Power and not worry about the cost.
@@TSGReelService i need a big big spinning reel.. Over 300 m of 0.50 mono
Great video. Thx for tutorial. What grease do you use for the drag washers?
Thanks for watching. What's the part. number?
@@TSGReelService number 56 and 56T, Drag friction washer
@@marcomichienzi9852 Cal's drag grease.
@@TSGReelService Grease at 1:01:46. Sorry for my english.
Hii...
Spinfisher vi 8500 Live liner or standard 9500 is better to bye plz reply
Thanks for watching and your input. More vids to come.
How do you stop that slight rotor back play after servicing..? my slammer dose it as well now. Ive put it all back together write.? cheers:). Tackle advisors had the same problem as well.:)
Thanks for watching! I'm assuming you put it back together properly and I'm guessing he (Tackle Advisors) also checked the following things..... but the cause can only come from a few places.... the rotor nut (make sure it's set), the opening in the rotor where the pinion gear goes through (if there's wear in the corners or edges, it can allow for some initial "slippage" as it "locks" into place during the transition from from spinning to stopping and vice versa - rotate the rotor back and forth by hand to check), or, the likely culprit... the anti-reverse clutch (could be worn and need to be replaced).
The little cylinders in the a/r clutch ride in a plastic housing that can wear over time.... think of trying to reshape a plastic straw after chewing on it. This slight back play isn't necessarily detrimental to the performance, but I'd keep a replacement a/r clutch assy on hand, if I were you.
Hope this helps. Keep me posted.
Forgot to mention the gears... hold the rotor and gently turn the handle back and forth.... if there's significant play, the gears are probably worn... you could try shimming the main gear, but that won't always work... the MG and PG should be replaced.
@@TSGReelService Thanks heaps for your reply. There is some movement where the anti-reverse fits into the hexagon shape body. My spinfisher has only ever been used once. I don't know why that one would have play in it as well. I'm guessing its the same problem. My slammer has done a bit of work, not much though.
The a/r clutch inside seems good. There is no movement. But there is movement in where it sits into the body.
@@TSGReelService How do you set the rotor nut?? It looks like there is a lot of play just where the rotor nut needs tightening. The gears should be fine because it hasn't done all that much work?
You're welcome and no worries. All those things could affect the rotor play. Not necessarily one in and of itself, but one magnifying on top of the other. Like I said before, the overall performance of the reel shouldn't be significantly affected.
Hello, When you rotate the reel at 6:22 min I hear an interesting noise. Sounds like reel brake. What is the reason? I have same reel and yesterday I have heard this noise but I cant find the reason. Please help me. Thank you.
The backup dog is the noise.... a spring was damaged.... and changed later in the video.... keep watching to see the discussion about it.
Thanks, I have checked, but my spring is okay, it is not damaged, not broken. And I hear the noise only rarely not always. What is the function this part? Because in the smaller SSV reel you cannot find this unit.
It's a backup for the anti reverse. Your spring could be worn. Try replacing it. If that doesn't help the issue, take it to your local repair shop.
@@TSGReelService Okay thank you. Yes I think the spring is weaker than the new. I try change it.
👍
Lubricate the brake parts with white grease. What is this?
Thanks for watching! Cal's.
@@TSGReelService thanks for reply. Super tutorial 👌🏻👌🏻
You're welcome and thanks again for watching. More vids to come! Let your friends know by the channel.
You forgot the bail assembly.
Thanks for checking out the video! More to come.