3/16ths tubing install with D&G's Tim Wilmot
HTML-код
- Опубликовано: 12 сен 2024
- Today, retired UVM Maple Specialist Tim Wilmot, who is credited with the research and discovery of natural gravity high vacuum with 3/16th diameter tubing, does an install at The Maple News sugarhouse in Hebron, N.Y. Wilmot is now a consultant with Dominion & Grimm and spent more than eight years researching and honing the technology, which has become a phenomenon in the maple industry. Anyone with good slope should consider 3/16ths, which gives up to 29hg vacuum with no mechanical assistance...
I've been on 3/16 for quite some time now, it's working great.......I also found by using longer lines between the first tap and the barrel, I get more vacuum, of couse you need to have more gravity in between these two, so instead of starting at let say 6 inch of vacuum at the first tap, I now have 22 inch at first tap and going up hill, the vacuum is higher right to the top....I have 25 feet of drop between tap 1 and the barrel.
So I’m on pretty flat ground in my yard me and my daughter have 20-ish trees that we tap so from the beginning tap to the bucket how much of a slope should I need from tree to tree. Thanks for your help.
very nice! thank you!
Would a can of computer duster be effective for clearing chips from holes?
Where do you install the vacuum gage to get the best reading?
What intervals do you recommend for leak checking.
I'm only dealing with about 15 feet of elevation from the first tree to the collection. Would it be ok if i put the first tap 15 feet up on the first few trees?
You will still get some vacuum, yes. Not as much as you would at the top of the line, higher up, but better than nothing. 3/16ths works best on extreme slope
What clip are you using at 2:50 to attach the tubing to itself around the first tree?
It's an end line clip !!!