10 of 10. After using a third party software to try to fix the issue, (of which did not solve it) I suspeceted that it could be dust, dirt, or rust. So I looked for videos here, watched and followed yours. Works perfectly!
helo sir!i am a subscriber in ur channel..ask ko lang po sana ang prnter ko pag in on ko po xa nag eeror po at may maririnig kang tunog na parang gasgas..at lumalabas sa laptop ay error at removed paper jam..wala naman pong papel..tnx
what happens if both red lights turn on 1 by one at a time? it's like this: paper (on) ink (off) paper (off) ink (on) paper (on) ink (off) paper (off) ink (on) and so on. it just keeps blinking. it happens after I did head cleaning. and then it shows this message: "A printer's ink pad is at the end of its service life. Please contact Epson Support." can I repair it with software or something without changing any hardware?
YES U NEED TO USE EPSON RESET ADJUSTMENT SOFTWARE FOR SPECIFIC MODEL TO RESET INKPAD COUNT. BUT BEFORE DO THIS U HAVE TO REMOVE INKPAD FROM BACK SIDE OF PRINTER AND CLEAN IT. IF U DO RESET WITHOUT CLEANING INKPAD THEN THERE WILL INK LEAKAGE IN FUTURE.
@@wayneslink I m saying that when do a photo copy my Epson l210 printer is doong half page only after half page a sound comes an all page going lineing lineng
Sir patulong naman po. Epson L3110 po yung printer ko po. Kapareho rin po nung asa video nyo po sir, all lights are blinking po sir pero nakaka pag print rin naman po ako nang maayos. Pag mag i scan rin po no response. Tinry ko na rin naman pong mag reset pero ganun pa rin po sir blinking pa rin po yung two red tsaka po yung power button. Pa help naman po sir😭😭
10 of 10. After using a third party software to try to fix the issue, (of which did not solve it) I suspeceted that it could be dust, dirt, or rust. So I looked for videos here, watched and followed yours. Works perfectly!
Thank You. I repaired follow your video. Works Perfectly. Save money otherwise I have to buy a New One !!
Welcome sir, don't forget to like and subscribe for more updates 😉👍🙏
i solved my problem. thanks. best ever!😀
WORKED PERFECTLY ..GREAT JOB
Great video. Have the same problem. Hope to sort it out. Thanks Sir
Thank you so much very informative and helpful you save my money boy ❤️❤️❤️❤️
Thank you for the video.problem solved.
Thank you. It worked like a magic. Godbless! Already subscribed :)
Welcome and thanks ❤️
Sir petrol use kr skte h kya
Thank you .. you solve my scanner issue.....
Sama ky printr sy mas gt, cb ikut, trimakasih sangat menbabty sekali
very nice.thanks for video
is wd40 not corrosive for electronics contact?
Nopes in fact it prevents corrosions and rust
@@wayneslink thanks its saves my scanner
What if that light is off and the printer head isn't moving across when you power it as a sign of readynedd
Is it steady? No errors?
Thanks a lot its work for me.
THAK YOU
Welcome
Thank you! I was wondering why all the lights are blinking even though I don’t have problems with printing.
That could be a scanner problem. Try scan if it works
What if po nag biblink all lights and d cxah nag piprint?
THANK YOU! 💖💐☺️👌🧕
Welcome po, don't forget to like and subscribe for more updates 😊👍
helo sir!i am a subscriber in ur channel..ask ko lang po sana ang prnter ko pag in on ko po xa nag eeror po at may maririnig kang tunog na parang gasgas..at lumalabas sa laptop ay error at removed paper jam..wala naman pong papel..tnx
Sound ke sath red light on our scan light on rahta age nahi badhta kese thik kare
sir pwede po ba alcohol ang ipanglinis?
Pwdi pero make sure dry before testing
thanks for sharing
Welcome po, don't forget to like and subscribe for more 😊
Thanks
Welcome po. Pa subscribe naman jan 😊
Paano po kya yun? Ng blik din po ang aking printer power ink/paper notif?
My case is not printing and the lights are blinking
what happens if both red lights turn on 1 by one at a time?
it's like this:
paper (on) ink (off)
paper (off) ink (on)
paper (on) ink (off)
paper (off) ink (on)
and so on. it just keeps blinking. it happens after I did head cleaning.
and then it shows this message:
"A printer's ink pad is at the end of its service life.
Please contact Epson Support."
can I repair it with software or something without changing any hardware?
Надо с помощью принт хелп сбросить памперс
YES U NEED TO USE EPSON RESET ADJUSTMENT SOFTWARE FOR SPECIFIC MODEL TO RESET INKPAD COUNT. BUT BEFORE DO THIS U HAVE TO REMOVE INKPAD FROM BACK SIDE OF PRINTER AND CLEAN IT. IF U DO RESET WITHOUT CLEANING INKPAD THEN THERE WILL INK LEAKAGE IN FUTURE.
Sir good am po ano po possible problem if ang epson l220 nag xerox po kaht nd k po na click ang button.. Please help po
Grounded ata ang button nya. Linisin pati ang flex connector
Thank You Lodi!!!! puede gawa ka ng vid for Epson T60 ...steady red light ....ty
Hopefully may dumating sa shop 😊👍
after cleaning that my printer is not getting on
What cleaning did you do
Aadha page copy hone ke baad sound aata hai aur lineing lineng ho ja rahi hai system se head clean krke dekh liya thik nhi ho raha hai plz help
English bro
@@wayneslink I m saying that when do a photo copy my Epson l210 printer is doong half page only after half page a sound comes an all page going lineing lineng
Sir check the scanner laser, try to scan ang open the cover so you can see the scanner if it goes straight or not
bro pano pag same light indicator tapos ung cartridge ay biglang sasagad at tatama sagad tapos mag stop..
Pa check timing belt bro at encoder strip
Lodi ano kya problema ng printer good namn yung head umaakyat naman ang ink papunta sa head pero ng print sya walang sulat
Baka ubos na ink
@@jong-jongspeaks4224 may nag reply po sakin f2 fuse daw po d ko po alam ko san po banda yan sa board
Hanapin nyu f1 or f2 smd fuse, rectangular na may 0 (zero) na gitna. Pag testing nyu at walang beep o deflection meaning busted,
@@wayneslink salamat lodi
Try cleaning...
Wla po akong anti rust na panlinis sa flex
Alcohol nalang lagay sa tissue
THANKS FOR THE VIDEO ..IT WOULD HAVE HELPED IF YOU COULD HAVE ZOOMED IN ON REPLACING THE SCANNER FLEX CABLE..GOOD JOB
Sir patulong naman po. Epson L3110 po yung printer ko po. Kapareho rin po nung asa video nyo po sir, all lights are blinking po sir pero nakaka pag print rin naman po ako nang maayos. Pag mag i scan rin po no response. Tinry ko na rin naman pong mag reset pero ganun pa rin po sir blinking pa rin po yung two red tsaka po yung power button. Pa help naman po sir😭😭
Sir sana po ma reply an nyo po ako
Open scanner my dalawang screw, tapos lift up mo. May makikitang mga flex sa left side, reinsert mu lang yung pina ka malaki
@@wayneslink may video ka po ba
@@wayneslink binalik ko pa pero nagrered pa rin
magkano po kaya parepaair nung wire nabaluktot po ata