The skill is marvelous. Everyone in a hellhole country where guns aren't available needs to be doing this. Firearms are the most humane weapons and self defense is a FUNDAMENTAL HUMAN RIGHT!!
We made Zip Guns in Brooklyn in the 1970s when we were little 10 year old truants, a 5” piece of pipe and a finger from a rubber glove taped to the end, would be great for shooting BBs.
A Spanish friend of mine made them with a balloon (helium quality iirc, i.e. thicker than normal) and the neck of a plastic bottle. They were locally know as a 'poq' after the noise they made.
I did too. Used part of a car antenna a slide bolt with a short off center nail as firing pin. used rubber band pulled the bolt back and a .22 short. We also made blowguns withe a needle glued on the end of 1/2 a Q Tip.
Good to see your progress and development with your desigins. Just suggestions here.. If you're making more designs with that pump action, the large finger-lugs previously used for drawing back the slings are kinda reduntant. Maybe reduce them a little so the pump slide can still grab them but they look a little less stuck out. Also, the exposed channels for the lugs look a little out of place. Perhaps another layer of metal covering all that inner workings? Maybe one that goes over the pump slide, but still allows the wooden grip section to move freely? Finally a pistol grip style forgrip incorporated into the wooden pump grip would probably give you more leverage, making it faster and slicker to operate. Great work dude
I use a lot of superglue in my work... Thick, regular, thin, super thin, semi flexible... & I have never seen a single brand thatr bonds to anything as well as what ever he's using... Stainless to wood, wood to wood, etc... Of course we never see if it lasts for long under use after the video. Still, I would love to know the brand, & and absolutely give major props to the makers raw talent...
All of this stuff probably falls apart in no time. It’s just a quick easy way to get it done for the video. I’d recommend epoxy for this stuff if you want it to last.
Now: Imagine if you replaced that wood with strong Aluminum parts [welded together], stronger spring, along with thicker grades of Metal for your housing. Plus, you will be enabled to apply Lubricants to it [for Maintenance, and Endurance].
Aluminum for guns... Definitely not a good idea ! I did sport shooting in the 90s and 2000s. One day, in my shooting club, a guy died because of a mechanical breakage of a precision handgun with a duralumin slide. Because of the fatigue of the duralumin metal following the many shots, the tenons on the slide broke and the slide went back, directly into the eye and then the head of the shooter. He died a few days later... The Mauser 1945 type slides in steel have proven themselves through wars ! Whatsoever used, powder or not, steel is by far the safest !
@@caiussextiuscalvinus1399 Thanks... for your thoughts and suggestion: My Primary Focus was- Anything to replace that wood, Even a Certain Hard Plastic, to make such a toy gun last longer and maintain Lubrication and internal cleaning maintenance. Wood isn't going to work as well with lubrication maintenance [as well as a plastic, metal... etc] ... especially if the wood is put together via just glue. I imagine that the lubricant would eventually dissolve the glue, and even eventually the wood [depending on what type of wood you use to build such an contraption].
It's definitely cool! Think I'll stick with the M1 and the ar 5.56 mm for the time being tho. But hey if the shtf tomorrow, it's good to know I can still defend the fort. 😂
Words of warning, don't carry that in the streets. Some halfwit, half trained cop will think it's a firearm and you know what they will do.. Good job though..
@@angelone8564 In the UK it will almost certainly fall under the Firearms Act 1968 as it meets the definition used to describe a firearm. If you described it as a method of defence and have it with you in a public place, it also becomes an ‘Offensive Weapon’ as it is an item that is ‘Made, Adapted or Intended for causing injury..
You're obviously not a "cop" so I ask you, if you were armed and someone threatened to use the weapon is this video on you.....would you defend yourself or not?
There is probably a market for wooden guns since they don't have powder and no actual explosion they aren't considered guns. If a person designed them right and made them efficient it would be a way to protect yourself and home if you've lost your gun privileges. Even if lethal from a short distance would still be helpful and more so a deturant from harm.
@@MatthewOliver-n9c In the UK this falls under the constricts of the Firearms Act 1968. Section 57(1B) defines a "lethal barrelled weapon" as a "barrelled weapon of any description from which a shot, bullet or other missile can be discharged".
There really isn't any market for something like this. You're better off with a tyre iron, a golf club, or a baseball or cricket bat than this thing... which would still be illegal under the weapon restriction laws in some areas. Always check your local laws! Moreover, using an improvised weapon like this in a self-defense encounter will get you sent to prison, because the DA will be able to spin it as malicious intent on your part--you _intended_ to inflict serious harm on another human being, which is why you created that improvised spring gun when you could have simply 'called the police', heh. Never forget that the prosecutor in a self-defense case has one job, and that job isn't keeping the public safe or upholding justice. It's to convince the court to send the person in the jury box to jail or prison. If you're really worried about home defense a good set of motion-activated exterior lights and deadbolt locks will be far more useful than something like this. Criminals pick easy targets, so unless someone is personally out to kill you, they are less likely to choose to invade a house that they'll likely be caught whilst doing so. Similarly, home invasions by random strangers are quite rare. If the bad guys are there to steal, they don't want to deal with the residents.
Very nice beastie you made there my friend, awesome work. 🤩🙂. I have a challenge for you, if you chose to accept. Unless you have already done this... I would like to see if you could design one of your little beauties but instead of a pullback cocking system, see if you could design and build one with a lever action system. Give it some thought (if you don't mind of course). If you do try, good luck to you and happy building 🤩🙂 shouts from the UK 🙂
Imagine the ATF showing up to your home for manufacturing a weapon. Taking you to jail to fight felony charges that cost you thousands of dollars and your kids get put into protective custody. Just imagine
It is perfectly legal to manufacture your own firearms. It always has been. The problem comes out to if you decide to SELL a firearm that you made, it MUST have a serial number or some other maker's mark and you have to have a license to make the sale or have a licensed business conduct the sale on your behalf in which case you do not make nearly as much money
I absolutely love these demonstration videos and find it incredible frustrating that there never show you everything that's going on: no material lists including type and dimensions, all of a sudden there's other parts that they don't show you how they made them. There's some nice tools like a bandsaw and a drill press but they don't have a belt or disk sander? They don't even acknowledge the type of what appears to be super glue that bonds everything together. i find that i'm quite resourceful but without dimensions and a materials list, I just wasted 13:23 minutes!
If you are thinking about building this in the UK it will probably fall under the Firearms Act 1968 as it meets the definition of a firearm under the act. 'A lethal barrelled weapon of any description from which any shot, bullet or other missile can be discharged' .
The guy's a video & improvised 'weaponry' design genius- like a lower tech version of Jorg. Give him a break. There would be arguments over imperial vs metric, supply chain enquiries etc. If you really want to make one -just figure it out. The outer tube would be the defining dimension as well as any intended projectile 'caliber'. TBH I haven't quite got my own feeble * (mechanics wise) old brain around the mechanism yet on first viewing! 😢
@@mindyours752 Didn't you watch? He didn't use a single measurement, pattern at all.. He just eyeballed it. & I want to know what superglue he uses, because I want it! :)
@@Dusty136 The only firearms still not under gov. control is black powder. I used to fo Revolutionary War reenacctments and had many muskets and flintlock rifles. Now, 1 flint squirrel rifle, 2 pellet rifles, and a Henry repeating lever action.. The Henry, though not semi auto holds 17-20 rounds and I can get off 1 shot per second.
The raw wood parts won't last. Spend $25 and get an hawaiian sling. And, it's a huge public disservice to let people think this is a real Home Defense Weapon!
Было бы интересно узнать дульную энергию :) Короче, замерьте как нибудь какая кинетическая энергия шариков на расстоянии одного метра. Из вики по быстрому Пневматика .177 - 20 Дж Малокалиберный .22 - 160 Дж 9х19 Парабеллум 520 Дж Подозреваю, что дульная энергия вашего девайса будет сравнима с пневматикой и, следовательно, эта штука совершенно не подходит для самообороны.
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
I Love the amount of trust he places in that super glue.
Thanks
😂😂😂😂
😂😂😂😂 I was saying something similar laying here with my better half.
🤣🤣🤣🤣
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
В России делали подобные вещи в детстве)) Как у нас говорят. Настоящий мужчина - это выживший в детстве мальчик )))
Me comí todo el vídeo, pensando que era una pistola para clavar clavos 😂👎
🫵💣💥
😂😂😂😂😂😂
вот как говорится сделал на соплях из говна и палок.
мне одного не понятно, подшипники шарики не брали, что пришлось из гвоздей штыри вытачивать?
Пугачи были, вместо пороха, сера со спичек
Love it. I would've been hopelessly glued to the first piece of wood.
Thanks for watching🙏
Hahaha😂me too 😅
This video perfectly illustrates the power of innovation in defense. Sometimes, the most unconventional ideas turn out to be the most effective!
Thanks for watching🙏
Until that super glue fails on you.
he made a gun
Only thing missing is the JoergSprave quote "Let me show you it's features!" 😜
Thanks for watching
The skill is marvelous. Everyone in a hellhole country where guns aren't available needs to be doing this. Firearms are the most humane weapons and self defense is a FUNDAMENTAL HUMAN RIGHT!!
Thanks
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Americans like you make the rest of us seem retarded
Grow up, psycho.
Yeah, screw gun free human rights organisations!!!
I'm gonna be hearing this song in my dreams for the next 37 years...
Thanks for watching🙏
What is the name of the song, its very dreamy.
Absalutly amazing, great defensive weapon, we live the part of the world where we keep getting harrased by hords od balloons, this is perfect
Thanks
🤣🤣🤣
Такими снарядами из гвоздей можно знатно наделать дырок в теле противника. Правда после пары выстрелов тебя затопчут и запинают ногами.😂
@@diycrossbowhave you got a specification sheet with measurements etc?
If only Number Six had known about this when he was in the Village and faced the Rover.
In the UK, that would be classed as an offensive weapon, and because it has a barrel is likely to fall into an offence under the firearms legislation.
Thanks for watching🙏
Inggris ngising
SAY HELLO TO MY LITTLE FRIEND
Hello 🙏🙏🙏
LET ME SHOW YOU ITS FEATURES
@@MenukiJorge, haha I have missed that phrase. Thanks mate, I'm inspired to hunt down some of his vids too 🤩
That’s what I say to the ladies when I whip it out 😉
Tony Montana 👍
We made Zip Guns in Brooklyn in the 1970s when we were little 10 year old truants, a 5” piece of pipe and a finger from a rubber glove taped to the end, would be great for shooting BBs.
Thanks for watching🙏
A Spanish friend of mine made them with a balloon (helium quality iirc, i.e. thicker than normal) and the neck of a plastic bottle. They were locally know as a 'poq' after the noise they made.
A piece of plastic pipe and some tube elastic with an arrow would probably be more powerful and easier to make
I did too. Used part of a car antenna a slide bolt with a short off center nail as firing pin. used rubber band pulled the bolt back and a .22 short.
We also made blowguns withe a needle glued on the end of 1/2 a Q Tip.
@@japonaliyaThat's a Real Zip gun.... not what these other guys are talking about
I haven't even got halfway through. He has the dexterity of a clockmaker. 😳 Super skilled. 😊
Thanks for watching🙏
This is giving me ideas for my next story... Thank you for showing the world such an amazing device!
You should make and sell those that’s a pretty cool thing that you built!!
Thanks🙏🙏🙏
I would love to buy one .... don't think I could make this
Good to see your progress and development with your desigins.
Just suggestions here..
If you're making more designs with that pump action, the large finger-lugs previously used for drawing back the slings are kinda reduntant. Maybe reduce them a little so the pump slide can still grab them but they look a little less stuck out.
Also, the exposed channels for the lugs look a little out of place. Perhaps another layer of metal covering all that inner workings? Maybe one that goes over the pump slide, but still allows the wooden grip section to move freely?
Finally a pistol grip style forgrip incorporated into the wooden pump grip would probably give you more leverage, making it faster and slicker to operate.
Great work dude
Thanks brother🙏
Тут не только Калашников - тут и Шмайсер с Мосиным офигеют!!! От такой заморочки.
😂😂😂😂😂😂😂👍
I use a lot of superglue in my work... Thick, regular, thin, super thin, semi flexible... & I have never seen a single brand thatr bonds to anything as well as what ever he's using... Stainless to wood, wood to wood, etc... Of course we never see if it lasts for long under use after the video. Still, I would love to know the brand, & and absolutely give major props to the makers raw talent...
"G"
Look up universal oily glue
All of this stuff probably falls apart in no time. It’s just a quick easy way to get it done for the video. I’d recommend epoxy for this stuff if you want it to last.
@alexandermckand you're smarter than he is??ay9521
@@gerrybruce8309 yes
Your skills and ideas never fail to impress me. Well done. I look forward to your next video.
Thanks Buddy 🙏🙏🙏
Now: Imagine if you replaced that wood with strong Aluminum parts [welded together], stronger spring, along with thicker grades of Metal for your housing. Plus, you will be enabled to apply Lubricants to it [for Maintenance, and Endurance].
Aluminum for guns... Definitely not a good idea !
I did sport shooting in the 90s and 2000s. One day, in my shooting club, a guy died because of a mechanical breakage of a precision handgun with a duralumin slide.
Because of the fatigue of the duralumin metal following the many shots, the tenons on the slide broke and the slide went back, directly into the eye and then the head of the shooter. He died a few days later...
The Mauser 1945 type slides in steel have proven themselves through wars !
Whatsoever used, powder or not, steel is by far the safest !
@@caiussextiuscalvinus1399 Thanks... for your thoughts and suggestion:
My Primary Focus was- Anything to replace that wood, Even a Certain Hard Plastic, to make such a toy gun last longer and maintain Lubrication and internal cleaning maintenance. Wood isn't going to work as well with lubrication maintenance [as well as a plastic, metal... etc] ... especially if the wood is put together via just glue. I imagine that the lubricant would eventually dissolve the glue, and even eventually the wood [depending on what type of wood you use to build such an contraption].
In some cases , in order to defend .. you will have to attack😂😂😂😂😂😂😂😂😂😂😂😂❤
🤔Porque não colocar as instruções das medidas, e de como montar? Mas, fora isso, ótimo vídeo!
bro made a pump action pistol crossbow with super glue XD i'm simultaneously impressed and terrified
I have make it at the past🙏
Мы конечно так уж серьезно не заморачивались в детстве, но делали тоже воздушки.
Thanks for watching🙏
Putting a lot of trust in that glue...
Thanks for watching🙏
is amazing
Thanks🙏
if only I had the patience.. and parts.. and tools.... lol
😂😂😂
How does this mechanism work tho? 🤔
I can't figure out how the balls or nails are stored in the gun and how it reloads!
🥲 rell
And the blueprint
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
It's definitely cool! Think I'll stick with the M1 and the ar 5.56 mm for the time being tho. But hey if the shtf tomorrow, it's good to know I can still defend the fort. 😂
Thanks for watching🙏
Both are useful. This is a much more silent approach so it doesn't reveal your position.
if you secure the pushing mechanism on a gas powered framing gun you can have a machine gun.
do you have a list of the parts / dimensions of pieces? this is reallly coool
Таких умельцев сразу на учет надо ставить!
Thanks
We rather you make it for us. And we’ll buy it.
Words of warning, don't carry that in the streets. Some halfwit, half trained cop will think it's a firearm and you know what they will do.. Good job though..
Ok, thanks🙏
@@angelone8564 In the UK it will almost certainly fall under the Firearms Act 1968 as it meets the definition used to describe a firearm. If you described it as a method of defence and have it with you in a public place, it also becomes an ‘Offensive Weapon’ as it is an item that is ‘Made, Adapted or Intended for causing injury..
@@krissconlan8828 The Brits are comfortable with harsh words for personal defense.
You're obviously not a "cop" so I ask you, if you were armed and someone threatened to use the weapon is this video on you.....would you defend yourself or not?
In the States, we don't wait for cops to take care of everything
Amazing craftsmanship! You’ve really thought this through and it shows. This would definitely come in handy. Great video!
Thanks for watching🙏🙏🙏
Thanks for the video MacGyver.
🙏🙏🙏
Это будто бы отрывок из ремейка фильма "Брат"
Здраствуйте, дорогие мои подписчики! А сегодня мы будем собирать волыну из ламината и гардины 😂
There is probably a market for wooden guns since they don't have powder and no actual explosion they aren't considered guns. If a person designed them right and made them efficient it would be a way to protect yourself and home if you've lost your gun privileges. Even if lethal from a short distance would still be helpful and more so a deturant from harm.
It probably falls into the category of slingshot or crossbow, so look at your local laws for those devices.
@@MatthewOliver-n9c In the UK this falls under the constricts of the Firearms Act 1968. Section 57(1B) defines a "lethal barrelled weapon" as a "barrelled weapon of any description from which a shot, bullet or other missile can be discharged".
There really isn't any market for something like this. You're better off with a tyre iron, a golf club, or a baseball or cricket bat than this thing... which would still be illegal under the weapon restriction laws in some areas. Always check your local laws!
Moreover, using an improvised weapon like this in a self-defense encounter will get you sent to prison, because the DA will be able to spin it as malicious intent on your part--you _intended_ to inflict serious harm on another human being, which is why you created that improvised spring gun when you could have simply 'called the police', heh. Never forget that the prosecutor in a self-defense case has one job, and that job isn't keeping the public safe or upholding justice. It's to convince the court to send the person in the jury box to jail or prison.
If you're really worried about home defense a good set of motion-activated exterior lights and deadbolt locks will be far more useful than something like this. Criminals pick easy targets, so unless someone is personally out to kill you, they are less likely to choose to invade a house that they'll likely be caught whilst doing so.
Similarly, home invasions by random strangers are quite rare. If the bad guys are there to steal, they don't want to deal with the residents.
If my hand moved that fast I would never leave my room
Thanks
😂😂😂😂
Is this an ad for cyanoacrylate glue?
Right
I must make one of these, ... just in case i'm attacked by a pack of red baloons !!!
Thanks
that saw blade has seen a lot of triggers..
I'd like to know what kind of badass glue that is ? Pretty clever invention, you obviously made one prior to this video. Good Job
Cyanoacrilate
Very nice beastie you made there my friend, awesome work. 🤩🙂.
I have a challenge for you, if you chose to accept. Unless you have already done this...
I would like to see if you could design one of your little beauties but instead of a pullback cocking system, see if you could design and build one with a lever action system. Give it some thought (if you don't mind of course).
If you do try, good luck to you and happy building 🤩🙂 shouts from the UK 🙂
I have make it at my other video 🙏
@@diycrossbow Outstanding, looking forward to seeing that 🤩🙂
this weapon will be awesome next time some balloons invade my house
Thanks
Glad I turned on notification for all of your videos!
Thanks my friend🙏🙏🙏
Imagine the ATF showing up to your home for manufacturing a weapon. Taking you to jail to fight felony charges that cost you thousands of dollars and your kids get put into protective custody. Just imagine
It is perfectly legal to manufacture your own firearms. It always has been. The problem comes out to if you decide to SELL a firearm that you made, it MUST have a serial number or some other maker's mark and you have to have a license to make the sale or have a licensed business conduct the sale on your behalf in which case you do not make nearly as much money
Símplemente espectacular..
Thanks🙏🙏🙏
That's an easy amazing weapon, please make sure you include all your measurements ☺️🙋
This man is awesome 👌🏻 😮😮😮😮 0:39
My defence is my thoughts. I live in a totally safe world.
Thanks
Wow super nice special skills buddy.all target head shoot i believe in good God bless buddy
Man that's some good super glue there, the stuff I buy would never be that good
Thanks
😂 I love the vibe at the new knights armament Department 🙈
Looks like a great self-defence weapon--- if you are attacked by big red balloons. Does it also protect against an attack from other "party favors" ?
🎈🎈🎈🎈🎈🗯💭🤠
Incredible Brilliant Craftsmanship👍
Thanks🙏
I prefer instruments activated by gunpowder, but hey, very ingenious !
Thanks for watching🙏
Be careful the ATF will try and regulate and tax this weapon if not entirely ban it.
Thanks
Abolish the the letter “agency.”
Wonder if this would be OK with my parole officer...🤔
Very cool but this would immediately become illegal in Canada. 😮😢
Thanks for watching
Looks like Trudeau has slowly been taking away all your rights? Like the slow boiling frog in the glass beaker.
Who Cares, if I was any good in wood working I’d do it
Everything is illegal in canada
Only if it fires more then 495 ft / second.
J’aimerais tellement avoir les mesures! Superbe et apparemment efficace ! Bravo
The glue is strong with this one!
Thanks🙏
Name of that glue?
I feel crafty after this, wish I knew what I need to make one xd
Thanks for watching🙏
I absolutely love these demonstration videos and find it incredible frustrating that there never show you everything that's going on: no material lists including type and dimensions, all of a sudden there's other parts that they don't show you how they made them. There's some nice tools like a bandsaw and a drill press but they don't have a belt or disk sander? They don't even acknowledge the type of what appears to be super glue that bonds everything together. i find that i'm quite resourceful but without dimensions and a materials list, I just wasted 13:23 minutes!
And that, kids, is how AK-47s are manufactured!
Great piece of kit, very clever.
By the way, I know a good plasterer if you need one for that wall.
Thanks for watching🙏
It would be nice to show measurements but these ideas are rather brilliant
Imagine if you had a laser pointer on
Impressive. Sou can patent that, find an investor, and have it mass produced. It would sell.
Right🙏
Hard to believe he built that in 13 minutes and 23 seconds, not counting the camercials 😅
Thanks for watching🙏
Ingenious, powerful, homemade, thanks for sharing
🙏🙏🙏
Great work on that gun. I agree that super glue is trusted way too much. If it works I guess it's good.
Thanks my friend🙏🙏🙏
This with a double barrel will be so nice
Right🙏
Triple barrel, go balls deep!
If you are thinking about building this in the UK it will probably fall under the Firearms Act 1968 as it meets the definition of a firearm under the act. 'A lethal barrelled weapon of any description from which any shot, bullet or other missile can be discharged' .
🙏🙏🙏
Wait, seriously?
Wow. That's unreasonable. We have actual Firearms, that aren't considered firearms . Definitions matter.
Beautifully handcrafted, but a waste of time for something illegal. Better get your paperwork and buy a gun for a real defense.
Thanks
Long fingernails, superglue? I bet there are some safety flipflops off camera..
Thanks
Hi ! How many centimètre for the tube ?
Step one..... Make sure you have the right tools to do all this😂😂
Thanks for watching🙏
Great music!
Thanks🙏
BIG THANK from France !!
U A wellcome 🙏🙏🙏
Nice but no specs or instructions😢
Just watch the video
@@Tyrone-WardNot enough to give accurate measurements
The guy's a video & improvised 'weaponry' design genius- like a lower tech version of Jorg. Give him a break.
There would be arguments over imperial vs metric, supply chain enquiries etc.
If you really want to make one -just figure it out. The outer tube would be the defining dimension as well as any intended projectile 'caliber'.
TBH I haven't quite got my own feeble *
(mechanics wise) old brain around the mechanism yet on first viewing! 😢
@@mindyours752 Didn't you watch? He didn't use a single measurement, pattern at all.. He just eyeballed it. & I want to know what superglue he uses, because I want it! :)
@@willsanderson3742 Learn to read
The sound effects in the basement are awesome
Played at .25 speed is so cool. Wish I had it without the background music.
Thanks for watching🙏🙏🙏
Nice, but wht not just buy a hi power air rifle/pistol?
Pretty soon you wont be able to buy a cap gun
True@@Dusty136
@@Dusty136 The only firearms still not under gov. control is black powder. I used to fo Revolutionary War reenacctments and had many muskets and flintlock rifles.
Now, 1 flint squirrel rifle, 2 pellet rifles, and a Henry repeating lever action..
The Henry, though not semi auto holds 17-20 rounds and I can get off 1 shot per second.
@japonaliya hell ya those are cool! I knew a dude named Dean hesterman, he was all about those civil war reenactments
@@Dusty136 Yes back in the 80s early 90s was quite big both Rev. War and Civil.
Now not so much except in battleground states..
Why do I feel like I’m gonna be on some list after watching this…
Thanks for watching🙏
This man deserves my sub.
Thanks
You’re kidding!!!! The criminal with fireguns and you with a nail!!!
The raw wood parts won't last. Spend $25 and get an hawaiian sling.
And, it's a huge public disservice to let people think this is a real Home Defense Weapon!
Было бы интересно узнать дульную энергию :)
Короче, замерьте как нибудь какая кинетическая энергия шариков на расстоянии одного метра.
Из вики по быстрому
Пневматика .177 - 20 Дж
Малокалиберный .22 - 160 Дж
9х19 Парабеллум 520 Дж
Подозреваю, что дульная энергия вашего девайса будет сравнима с пневматикой и, следовательно, эта штука совершенно не подходит для самообороны.
if only i have the time, not bc.
At first I thought he was making Acme’s first Accu Jack. Lol
At 01:36 I Will leave the sanding part to my teenage son
Thanks🙏
😂
You got the joke right LOL @@brandonbennett6278
I think adding a spring to the reloading mechanism would help set it back in place instead of pushing it back yourself... dont you think?
Boom boom boom open the door ATF
Thanks
Because energy is supplied by the rubber bands used. It is better to just make a Sling Shot
Thanks
Agreed. Less friction = more velocity.
Its a pump action bb gun
Thanks
Any chance you make a diy for a Snipper Riffle? Or a C4 detonator... Is also for self defence ☝🏻😂😂😂😂
Thanks
ready kah Om di toped?
Belum
Kpn redy ya?.
8@@diycrossbow
@@diycrossbowinfokan kalau dah ready
Mantap nih gaes
You're are a telented genius! Love your vodeos!
Thanks🙏
Ok
Thanks
Parabéns, ficou muito top a construção da sua arma de esferas e dardo de pregos.
Thanks for watching🙏
hello how much do you sell it for?
$13
@@diycrossbow comment payé pour le fusil ? ou payé ?
@@diycrossbow Sur ebay ?