i love those mikuni slide carbs. they work great on the small single cylinder predator engines. i get my minibike up to 60 with the current gearing. but loads of torque.
i have the lifan kp mini ,im running a kp exhaust ,a 28mm tmx flat slide with a 12.5 pilot and a 105 main needle clip all the way at top ,drilled out airbox and it does a honest 70 ,bout to swap rear sproket to a 35
I have this same condor and color "mine has the condor and rps logos". I've maxed out speed at 60mph gps verified but it gets up there really fast and its a fun bike. @700 miles, slip on muffler, nibbi pwk26 carb & air filter, 17t front sprocket, fender delete, strolling signals, handle bar mirrors and blue handle grips.
@@jimstenlund6017a bro I see you a lot on these type of videos, I’m 50years young and about to purchase a boom vader and I’m wanting to modify it BIGTIME with a 210cc engine and take off all bunk China parts with better quality parts, swingarm, clip on bars, brakes, steel braided lines, everything. I want it to be my everyday workhorse to get around on and to keep a smile on my face every time i jump on it to go for a nice long ride. A bro if you’re in Southern California I would really like to learn as much as I can about these little beasts. CHEERS FROM EAST LOS ANGELES CALIFORNIA TO ALL MINI BIKE HEADS AND STONERS ALL OVER THE WORLD. RIDE HARD N RIDE SAFE.🛵🏍🚲🛹🌮🍰🌲🌲🌲🌲🌲🌲🌲🌲🔥🔥🔥🔥🔥🔥💯💯💯💯💯✌🏼😉👍🏼420😎
This was awesome guys!! ❤def wanna see more mini bike mods!!!! I been wanting to pickup a cheap Chinese bike or atv. I’ve had my fair share of frustration with carbs too so don’t feel bad at all lol. I’m def an efi guy for sure. My dads luckily a carb guru lol he tuned the ffffff out my bikes I use to have and when I did a carb/jet kit + exhaust and intake it made a huuuuuge difference Best thing if you want more mph is get a diff sprocket set to play around with and also try to make sure your tires are inflated well enough for the extra weight too so you don’t have as much rolling resistance. Prob the other things I’d do is a better spark plug and coil. Be sure you also change your oil and use a good quality filter don’t cheap out on that part.
Learning to tune carbs is worth the effort. Let the ponies outta the pen boys🎉 nice vid!!!! Thanks for the time given! Been looking at the condor. This helps me make my choice😊
The 125 isn't made to go that fast. Usually a 150 tops out at 65. Those 125ers also have motor mount problems, and from hearing the suspension and exhaust suck, where as the 150's stock exhaust tone is decent. From doing 125s, they can keep up with traffic up to 50mph, however are pretty slow after 45-50. A 150 should be the ideal size for anything not highway.
Depends which neon, the white one is gone but we made a video about that already. The blue one is broke. The Caravan is the only "neon" related content there will be on the Channel for the foreseeable future.
Here for the panther platform content, but get blessed with y'all on the minibikes!! I'd love to see a big twin on the channel, with a supercharger or turbo?! Riding slow bikes fast is always more fun!
This was a fun video. I'm not a huge bike guy, but give me an over glorified scooter like these i'm sold :D Now i want to know what's in the box lol, Turbo? That's the thing with anything, mess around till you find out, it'll either be, good, bad or mediocre lol. Now i need to get my Ct90 out of mothballs and get working on it.
Now listen... That TNT can get some expensive custom work like what a guy named "Mike Davis" is doing and get that CSC 450 motor swapped into it. The RPS condor has a really neat swap potential with the Zongshen 250 or 300 and 6 speed transmission that is almost plug and play. Significantly less expensive than the TNT/CSC swap and almost as fast. Y'all should look into those options for them bikes.
Riding season is pretty much winding down where we live. Definitely will next season. These are just fun filler content in between the actual builds that take a little longer to pull off.
Damn I was looking at the boom vader 125... but this girl look nasty. I have never seen a grom/clone spit fire. That was badder den a mf. Awesome vid guys. Thank you!
Why not just install a 250cc engine instead? Those engines aren't made for much more power and you'll just burn it out a lot faster? Other than that, love you guy's video's, thought this one was a little old now.
Oh yea, another trick to try, make a flywheel woodruff key that advances the timing or slot the pickup. I’ve been messing with small bore carburated engines for the last 20yrs
Wheelie machine right there! I expect at least an attempted wheelie from someone. Tell you what; I'll sub for that. If i dont see the front wheel off the ground in.... 1, no 2 months, I'm unsubing
You guys are trying to go the fastest. Who cares about that. These things are built to wheelie. Ok I'm unsubing if I haven't seen a wheelie in 2 months. Extra points for wrecking!
@@proelitjump1355 They are mini motorcycles, but traditional "minibike" is something with just the essentials to ride it. Frame, engine, wheels, brakes. That's all a "minibike" usually is. Once you throw a wiring harness on there it surpasses a minibike.
Bro slapping his belly saying cut just got my sub!! Y’all are awesome
Loving the content guys. Carb work is becoming a lost art. Looking forward to more videos on these uhhh Miniature Mopeds? LOL
i love those mikuni slide carbs. they work great on the small single cylinder predator engines. i get my minibike up to 60 with the current gearing. but loads of torque.
i have the lifan kp mini ,im running a kp exhaust ,a 28mm tmx flat slide with a 12.5 pilot and a 105 main needle clip all the way at top ,drilled out airbox and it does a honest 70 ,bout to swap rear sproket to a 35
Ahh shit my boys up in the house 🤘🤘y’all’s channel is one of my favorites. Keep rocking.
Great vid. Links in the description of what actually worked for you guys would've been nice as these grom clones are becoming more and more popular
just here for the srt content which needs to be more... thats the coolest builds you have no doubt.
Those bikes look like a blast!
those little slip on mufflers kick ass. i had the same one a gy6 scooter and it sounded way deeper then i would have ever thought
I have this same condor and color "mine has the condor and rps logos". I've maxed out speed at 60mph gps verified but it gets up there really fast and its a fun bike. @700 miles, slip on muffler, nibbi pwk26 carb & air filter, 17t front sprocket, fender delete, strolling signals, handle bar mirrors and blue handle grips.
Up/forward handlebar riser really helped mine ( different bars too )
@@jimstenlund6017a bro I see you a lot on these type of videos, I’m 50years young and about to purchase a boom vader and I’m wanting to modify it BIGTIME with a 210cc engine and take off all bunk China parts with better quality parts, swingarm, clip on bars, brakes, steel braided lines, everything. I want it to be my everyday workhorse to get around on and to keep a smile on my face every time i jump on it to go for a nice long ride. A bro if you’re in Southern California I would really like to learn as much as I can about these little beasts. CHEERS FROM EAST LOS ANGELES CALIFORNIA TO ALL MINI BIKE HEADS AND STONERS ALL OVER THE WORLD. RIDE HARD N RIDE SAFE.🛵🏍🚲🛹🌮🍰🌲🌲🌲🌲🌲🌲🌲🌲🔥🔥🔥🔥🔥🔥💯💯💯💯💯✌🏼😉👍🏼420😎
Love these videos! Keep them coming!
100 pound weight difference is absolutely wild to say in such a calm manner. dope videos
Keep up the great content love the mini bikes 👌🏻
This was awesome guys!! ❤def wanna see more mini bike mods!!!! I been wanting to pickup a cheap Chinese bike or atv. I’ve had my fair share of frustration with carbs too so don’t feel bad at all lol. I’m def an efi guy for sure. My dads luckily a carb guru lol he tuned the ffffff out my bikes I use to have and when I did a carb/jet kit + exhaust and intake it made a huuuuuge difference
Best thing if you want more mph is get a diff sprocket set to play around with and also try to make sure your tires are inflated well enough for the extra weight too so you don’t have as much rolling resistance. Prob the other things I’d do is a better spark plug and coil. Be sure you also change your oil and use a good quality filter don’t cheap out on that part.
Learning to tune carbs is worth the effort. Let the ponies outta the pen boys🎉 nice vid!!!! Thanks for the time given! Been looking at the condor. This helps me make my choice😊
I look forward to the **Stomach Smack** "Cut" By Charles In every video 😂
What size jets did yall ended up with?
I want to know as well.
Yeah, a dyno run would be cool.
I think the issue is the lack of back pressure with the exhaust is what is making it run so rough.
Id like to see yall mess with that vader 125 as well cause im getting ready to buy and curious to what would help get over 65 lol
Definitely do a sprocket swap.
Salute
The 125 isn't made to go that fast. Usually a 150 tops out at 65. Those 125ers also have motor mount problems, and from hearing the suspension and exhaust suck, where as the 150's stock exhaust tone is decent.
From doing 125s, they can keep up with traffic up to 50mph, however are pretty slow after 45-50. A 150 should be the ideal size for anything not highway.
What did yall end up putting on it, need links or info so I can grab them for mine!!!!!!!
Filter sniff. Nice.
Salute
You know its a good day ahead when you see "Boost & Bad Habits Uploaded a video" in your feed
good shit man! Hopefully that box has an AMR500 that you plan to use on one of these 😂
I definitely want to see you do some upgrades to the banelli
We got some nice goodies going on it this week
Floats adjusted ? My atv would run good but at higher constant rpm it starving it's self because of floats
Yup, our buddies dad figured out that's what it was doing was running out of fuel during long pulls.
Where's the neon content, that's why I subbed.
Depends which neon, the white one is gone but we made a video about that already. The blue one is broke. The Caravan is the only "neon" related content there will be on the Channel for the foreseeable future.
Clear float bowl wouldn’t hurt , and a big bore kit
What size was the rear shock you used?
where can I buy that exhaust
Cam change yet?
lol. Love the struggle bus trip. Carbs are stupid. lol I have a little Condor and I'm gonna put together an EFI kit for it...
Where you guys located
Here for the panther platform content, but get blessed with y'all on the minibikes!! I'd love to see a big twin on the channel, with a supercharger or turbo?! Riding slow bikes fast is always more fun!
We got the wrong shit😂😂😂😂😂
did you figure out how to reduce the vibration at 40mph+ ? its hard to ride for long rides my feet hurts because of the vibration
Good boots help, but make sure the engine mounts are good/tight.
Swap to a balancer version of the CG.
Let’s go 🔥🔥 love this channel
This was a fun video. I'm not a huge bike guy, but give me an over glorified scooter like these i'm sold :D Now i want to know what's in the box lol, Turbo?
That's the thing with anything, mess around till you find out, it'll either be, good, bad or mediocre lol. Now i need to get my Ct90 out of mothballs and get working on it.
turbo gonna be a nightmare with a carb lol doing fuel injection and a turb would be super interesting to watch
Isn't a turbo but close lol
which clone is the best
Btw. Move that needle clip down 1 position
What was in the box tho?
Bad ideas 😅
love it you should fit the turbo 😃😃
Wasn't a turbo in that box but close 👀
That stock filter sucks lol
Lets Go! This is Kota James by the way 😅
“69 would be nice, but I don’t see it happening” 😂
Install a genuine K&N pod air filter. Oil it. That may be where you are losing the high rpms.
115 Main 40 Idle
A wide band would make that cake
Having the right length jets would've made it cake. Also who puts a wideband gauge on a 10hp carb China bike lol.
Hell yeah brother
It popped a flame Dale Yeah!
Now listen... That TNT can get some expensive custom work like what a guy named "Mike Davis" is doing and get that CSC 450 motor swapped into it. The RPS condor has a really neat swap potential with the Zongshen 250 or 300 and 6 speed transmission that is almost plug and play. Significantly less expensive than the TNT/CSC swap and almost as fast. Y'all should look into those options for them bikes.
From using does carbs on my predators. Flames means it’s lean
Let’s see some full size motorcycle content
Riding season is pretty much winding down where we live. Definitely will next season. These are just fun filler content in between the actual builds that take a little longer to pull off.
I’m confused is this a condor or a Vader ??
Same same
Condor X-Pro 150, or Vader 125.
Damn I was looking at the boom vader 125... but this girl look nasty. I have never seen a grom/clone spit fire. That was badder den a mf. Awesome vid guys. Thank you!
Dyno for a base line / fine tuning before that terbski goes on it 😁
16:29 sickk race lol
Getting passed by regular traffic 😅
I think your exceeding the weight limit.
Why not just install a 250cc engine instead? Those engines aren't made for much more power and you'll just burn it out a lot faster? Other than that, love you guy's video's, thought this one was a little old now.
Calling it its a supercharger in the box, you best believe I stopped the video to get a look at the foam outline. supercharger final answer
❤❤❤❤❤❤
The fried rice express
ZOOM ZOOM
Dyno and turbo
HEY YOU SHOULD TRY AND FIND A FORD ECOBOOST CAR AND TAKE THE BABY TURBO AND MOUNT IT ON THE CHINA BIKE
Spoiler alert: there was a turbo in that box
Spoiler alert: close but not a turbo
You're better off installing a CG250.
If ya have a lathe, shave some weight off the flywheel
Shew if we had a lathe we'd be able to afford real bikes 😅
@@BoostandBadHabits GIT BAK 2 KRANKN DEM HAWGS
Also, might wanna try a genuine Mikuni vm26 carb. Nibbis are ok at best, GENUINE MIKUNI ARE TITS
Oh yea, another trick to try, make a flywheel woodruff key that advances the timing or slot the pickup. I’ve been messing with small bore carburated engines for the last 20yrs
@@BoostandBadHabitsno need for a lathe. You guys are rednecks. Probably can mount the flywheel on a drill and shave off with a file.
Ayooooooo
Wheelie machine right there!
I expect at least an attempted wheelie from someone. Tell you what; I'll sub for that. If i dont see the front wheel off the ground in.... 1, no 2 months, I'm unsubing
The countdown begins
I'm a fat guy too, so that is no excuse
@tayloralvidrez4342 the front wheel has definitely been off the ground lol, and so has the back 😅
The China bikes suck
Gotta get a Jap
Grom or z125
@@BoostandBadHabits I have a couple minutes left. Still waiting for it
You guys are trying to go the fastest.
Who cares about that. These things are built to wheelie. Ok I'm unsubing if I haven't seen a wheelie in 2 months. Extra points for wrecking!
They're mopeds imo. Minibikes are not street legal or that fast in 99% of cases.
You need to come to europe and see some actual mopeds😂
@@proelitjump1355 They are mini motorcycles, but traditional "minibike" is something with just the essentials to ride it. Frame, engine, wheels, brakes. That's all a "minibike" usually is. Once you throw a wiring harness on there it surpasses a minibike.
Carbs are superior! 🎉
Calm down 😅
No
I don’t know man… it’s close lol
YOOO! It sounds sick!
No question about it, they ARE motorcycles. Not mopeds. Mopeds have pedals!!!!