DIY Tutorial Honda Accord K&N Typhoon Intake Systems Installation with Sample sound clips
HTML-код
- Опубликовано: 6 сен 2024
- Fits Honda Accord 2013 2014 2015 2016 2017 for both Coupe and Sedan and all trim : lx sport ex exl touring sensing
i4: Part Number - 69-1213TS amzn.to/2tlinSL
V6: Part Number - 69-1212TS amzn.to/2hntLLS
www.autoanythin...
Filter cleaning kit: amzn.to/2hrX25H
CARB Info: www.knfilters.c...
Designed to improve throttle response and engine sound.
Low restriction aluminum tube.
Easy to install, usually in 90 minutes or less.
Filter lasts up to 100,000 miles before service is required.
Replaces stock air intake system.
Washable and reusable lifetime air filter.
FAQ:
PRODUCT LIST OF ALL THE OTHER LED/HID BULBS I USE:
Dashcam: amzn.to/2gmMpz8
Interior: goo.gl/Los6Da
Reverse light: amzn.to/2bHEQEC
Rear RED Turn Signal: amzn.to/2bhVj1m
Rear AMBER Turn Signal: amzn.to/2bHLESM
Rear side marker/tailight: amzn.to/2bHFbal
Taillight/brake: amzn.to/2bk2WRG
Rear Bumper Led Reflector: goo.gl/QBMw5z
Trunk: amzn.to/2byaZOI
License Plate: amzn.to/2bpiPbD x2
Front turn signal (switchbacks): amzn.to/2by95NQ ( for coupe only)
*Sedan: 13-15 Switchback: amzn.to/2bhr0uM
2016 Sedan Switchback: amzn.to/2bHLRpi
HID Low Beam (H11B: 5500K): goo.gl/lLDrR9
HID Ballast: 35W F3 Ballast: amzn.to/2bhWqhH
DRL/High Beam: 9005 LED: goo.gl/Ztfgwn
Parking Strip Light (5000K): goo.gl/2gm5gl
Fogs: goo.gl/EQClRC
I can be reached via:
Facebook: / diycarmodz
Instagram: / diycarmodz
Google+: plus.google.co...
Email: diycarmodify@gmail.com
Mailing Address:
DIYCarModz
9051 Mira Mesa Blvd
#262321
San Diego, CA 92196
![Honda Accord 2.4L [#69-1211TTK] Air Intake Installation](http://i.ytimg.com/vi/2nyJJQ2LIjs/mqdefault.jpg)
I have one for my 2012 Accord and it made a huge difference in sound. At stock it sounds like a sewing machine but with the intake it actually sounds deep and throaty. I noticed no performance increase though. I got this purely for sound.
Legion Z send the link for the intake system I’m trying to do the same with my 2012 Honda Accord 2.4l
Did everything fit for it good? Every website says it’s not compatible for 2012 but it looks just like other systems that are compatible just newer
@@fernandobueno8776 just buy k&n stuff it fits
@@fernandobueno8776Depends on whether you have a 8th gen (08-12) or 9th gen (13-17) Honda Accord I4 (2.4L). The parts on both are similar, but are usually not directly interchangeable (at least from my experience).
And you will be ingesting lots more crap becouse those Cotton based filters take in a little of dirt. You'll be wearing that engine out much faster.
Thanks for the video!!!!!!! It was perfect. Perfect camera angles, clarity, detailed, no audio issues and straight to the point. I wish people would watch your tutorial videos before making their own tutorial videos and posting them on RUclips 😂😂
i use the drop in filter,i can feel the throttle response improved and gear change become smoother,the momentary bump between gear change became less noticeable
Thanks you so much bud!!!! Your video was perfect and with exact measurements and procedure. Worked like a charm and it was great. Thanks for doing this and helping others. Appreciate it greatly.
Great tutorial! Installed in 45 minutes. Thank you for the video!
How is it? I heard there was an issue w/ heat soak in the summer and I’m debating doing it
@@killingmastaonestly, if you’re looking for power gains in the long run and you live in a hotter climate area, you’re better off sticking to a full CAI (cold air intake) that is actually heat wrapped (usually with gold intake wrap). A cheaper, more common way to avoid heatsoak (most successfully), would be to run a high flow air filter (K&N, aFe, Takeda, AEM) to the stock air box. You can even option to swap out the stock airbox hosing/piping for some upgraded silicone hosing (HPS). This will delete the extra resonance chambers and baffling from the OEM intake hosing/piping, which will give you a bit of air induction sound, although not a ton like a legitimate aftermarket intake system (with an exposed air filter element).
You can delete the stock intake resonator chamber if you’d like, but in my case, I decided to keep it, as it was connected to the front grille shroud by the top of the hood (when closed). The stock air intake shroud is already technically as legitimate as a “cold air intake” would be, not to mention it’s from the factory (R&D knows what they’re doing [usually]!).
I did this on my accord great kit and it sounds amazing
michael cordell send the link for the hole intake system please I’m trying to do the same with my Honda Accord 2012 2.4l
Any difference so far? Have you had any problems lately?
I noticed that the 1.5" cut piece where the crankcase vent goes in is kinda loose from the tube part so I used the clamp from the stock and its nice and tight now
The washers are called flat washers and lock washers. The one you said had an opening is a lock washer.
Really good video, probably one of the more straightforward approaches. One question though, do you see any benefit to removing the rest of the stock snorkel system? Since it was designed to feed cold air from the front of the engine bay it seems it would provide some benefit leaving it. Another video mentioned removing it to improve airflow, but that seems counter intuitive to me.
I agree with you, I would leave it be. The air is feed up to the air filter through that tube.
Thank. Can 2017 Accord throttle cleaning and ecu learning video upload?
DUDE!!!! thanks a lot!!!!! this is so helpful!
According to the website for K&N and even Amazon, it's listed as "Exc. LEV2 SULEV Test Group EHNXV03.5SC3; California Air Resources Board Exempt: Yes; CARB EO: D-269-39; 69 Series - Metal Intake Kit for Sport Compact & Sports Car; Silver (CA)" for my V6 yet it won't ship to my CA. address? That's weird!!
Sure would love to have this in my 2014 Honda Accord Sedan EXL V6. I've already got a Borla Type S and this would match perfectly!! Thanks for sharing the installation video and sound clip for your car.
The enclosed box shields your air from getting more engine heat soak. All you need is a drop in K&N, not the exposed filter.
nice tutorial! I wish I'd have seen a video like this when I installed mine 3 years ago on my 2013 accord sport. I probably don't have to clean mine yet but how do you recommend to clean the air filter?
There is a video that I saw, that I just can't find again, where a guy removed the entire air channel box that runs from the grill underneath to the intake. He said only then will you actually get hp increase and crazy down low torque.
I have 2017 Accord sport 4 cylinder it seems as if with wanting to hear the noise the desire of such you would burn more gas mileage than you would without it I'm thinking about putting on mine but if it doesn't give me any gas mileage increase and just for performance I doubt I would do it because I don't have any money to waste and when I do I would do it for sound and performance but gas is crazy in the Illinois right now so no but thank you for the video God bless
I brought from a friend who has the touring edition model
Great Video! Thanks for taking the time to share your knowledge.
Anyone else get a P0172 code? I have a 204 Honda Accord LX and after a few months of having it, the code started showing up
Excellent video!! Thank you. Do you have a video showing how to clean the throttle body (removing carbon).
i want this K&N airfilter with a borla exhaust would sound great
@Ho-Hyeon Bae could you post a video of how it sounds?
One thing that I do not understand about this video/cold air intake is the car is designed by factory to take in air through a tube that leads to the front of the hood/car. At 6:46 you can see that the air filter is not connected to the actual factory air intake tube... can someone explain to me if this is meant to be designed that way on purpose? It just seems fishy or odd to me that the cold air intake doesn't hook directly up to the intake tube.
Thanks for the video. Would this be the same installation on a 4 cylinder 7th gen accord?
Love your videos. Do you plan on getting the Lexus style aftermarket tailights anytime soon? Waiting for you to get those before I pull the trigger on one of those lol. Or do you have any brands you would recommend? I have an sedan btw
Nickraj Singh I got the tail lights
The Lexus lights are ugly
Did you notice any difference in hrspr? Lag when stepping on gas? Gas range? Heat soak? I purchased on and wrapped it and the shield but haven’t installed. Please help 😅
KN INTAKE IS MUCH EASY TO INSTALL COMPARED TO AFE INTAKE , NO NEED TO REMOVE COOLANT HOSE AND VACUUM HOSE
Gracias por el Video!! Do you see the improvement now after the instalation in gas and Power?
Awesomeness... What are the HP & Torque gains on this kit.. Thinking bout putting one on my 2015
This is a great way to get some nice hot air sucked in to help you go fast.
Thanks for the video just installed mines 🔥
Got a check engine light from the cold air intake , any suggestions?
check to make sure your MAF sensor is connected.
Thanks for the info Jeff.
Clear video on how to install it.
Just checked the price. Wow, a little expensive for some tubing and a filter.
No filter will last a lifetime. Performance will be reduced over time. Even after cleaning.
David Hughes Yes, these can get costly. that is why I haven't purchased it until now. I've been spending $20 each year on a new filter. so I'm hoping with the annual cleaning, this will last at least a few years until I get that lexus.
David Hughes also... with car parts.. I think of them as a saving account.. when I'm done with it, I can always resell it used and get most of the money back. I've sold used intakes for $100+ without any problem with multiple offers
Hey bro I have a 2.4 2013 Honda Accord sport, was curious what exhaust system you running?
Can you do a tutorial for the Injen cold air intake?
What about the open hose end (located under the new KN air filter)? It previously connected to the old stock air filter housing. Do you just leave it open? What does it do??
How can I remove those hoses? It seems like I couldn’t remove them after pressing in the clamp. It just wouldn’t budge
Is it worth to get? I have a 2011 EX 2.4L but I don’t know if for 300 hundred is worth it. What other recommendations would you have?
True, this is a short ram intake.. but they call it a cold air intake because of the heat shield..
Great video as always. I'm looking for a short ram intake for my Civic and was glad to see you install yours to get an idea on the process. I would like to know if you received any error lights and do you plan on keeping it installed.
rsilinnyc no errors. I've read a few people experience error lights but the problem was because they didn't reconnect the map sensor. I plan on keeping it until I no longer own this veichle.
hello, question what kind of part is the one you're holding at 5:57. I installed my k&n intake a while back but lost that tube. do you know if I could get that part from local auto parts store? if so, what part should I ask?. thanks sir. great vids btw.
Do you know if an aftermarket air intake replacement is enough to throw off my MAF sensor?
Did you keep it on? Did you end up having problems w it or nah?
My car gets to 160 F during the summer. I went through half my coolant in two weeks. Would this improve the AC
LMAO 😂 not at All helpful for you situation
No.
WONDERFUL INSTRUCTIONS....! I had to subscribe and definitely give you a thumbs up...!
Thanks for the video. How much mpg improvement?
OK. It's time to upgrade your audio system for block that noise LOL!
just installed this intake on my 2016 Honda Accord LX last week. A few days later a few warning lights popped on my dash. I tried to find accurate forums to fix but didn’t seem to find any luck. I tried disconnecting battery neg. for 10 min to hard reset but didn’t seem to help. any idea why?
Warning lights are :
TPMS problem
Hill Start Problem
Road Departure mitigation system problem
Power Steering system problem
Vehicle Stability Assist Problem
Under the hood on the passenger side there's a like a white switch make sure it pushed in all the way
So do you still need the airbox that goes underneath the car? I have a 2016 Honda Accord sport V4 and it fell off... Can I just replace it with an intake like urs and just eliminating the one at the bottom?
You do not need the resonator box. You can eliminate it.
I have a 2014 Accord LX can I get the aluminum tube in blue ?
Did you say it's a 2010 k24?looks like it'll fit a 2008 k24 ya think?
It's what I got
Sorry i know this is a old video, but what do you do about the tube that the OEM intake box connects to on the bottom of the box? Great video tho!
I did not remove that part of the factory intake because that is where the "fresh" air come in through that air duct.
I have this intake and it won’t pass smog because of it pls help
What’s the difference between the short air intake and cold air intake?
What size is that little tube I need to get one for my intake
Hi, Jeff, I'm thinking about to get one between K&N and Takeda. Do you know which one has the better performance, or they are just different in color, that's all.
Same. I was going to pick up Takeda but the don’t ship to CA. I like the black powder coat look over the silver.
Great tutorial thanks a lot
I have the same one on my car. Will you pass inspection with this intake?
Hi Jeff. I'm thinking of getting v6 coupe by end of this yr. I had the Taketa but it wasn't legal. Is this legal for smog check to be passed? Thx.
Takeda wasn't legal at first but I believe they filed and received the carb exempt status. Call Takeda and ask for the carb sticker.
any problems with water from the wheel well?
great install and sounds great!!!!!!
Hi, Man. I live in CA too, is this okay to install on cars? will it be trouble if get caught by police? Also, after installing this, you don't need to change the air filter any more right ?
As long as it had a CARB exempt sticker, you shouldn't have any issues when you take it in for a smog check. You have to clean the filter. They sell cleaning kits. I clean them once a year.
Anyone get a weird whistle sound between 2000-3000 rpms?
Is this okay for the winter time ?
Is there any other way to loosen the hose clamp that secures the factory intake tube? My screw driver doesn't seem to work.
I believe they are a 8mm nut. I'm not sure exactly but a socket can be used to remove them as well.
DIY: Car Modz it’s a 5.5mm nut. Thank you for the vid
i want a tekada but cant find it I stores.. k&n are sold everywhere.... but whats tge different between both
They are pretty much the same. Takeda comes with 2 filters and is powered coated
Did you have your HIDs installed during the drive?
marky mars S1 AuxBeam with XB fogs turned on.
Thanks
Will this work with a different engine same car?
I'm planning on installing the same k&n intake . A lot of people been telling me it messes with the idle of the car . My question is does install the intake affect the car in a bad way in any way? Btw my car is a 2014 accord lx
Same as stock. It does not mess with the idle. Only way it will mess with the idle is if there is a vacuum leak or the MAF sensor is not reinstalled.
DIY: Car Modz thanks for your reply I was so worry it would mess with the idle or something else . You took my worry of my shoulder haha thanks .
Where do i get the crank case hose
Any reason why you didn't go with the Takeda intake instead?
marky mars Takeda are not legal in California and the vendor that I purchased the intake would not ship it to CA address.
If the Takeda were legal, why would you get it over the K&N? Both are just replacing he airbox with less restriction, and neither do much without a custom tune. I've also heard that aftermarket intakes can actually lower your hp.
Robert Myers I prefer the black color tube.
There you go, style wins! Ha ha. Just kidding, Jeff.
Are there any noticeable performance gains from this? Thinking about doing this to my car
Not really but it sounds really good
Hey Jeff!
I've been getting the "check charge system" message a lot lately. Is that because my battery cables are loose? I haven't even installed this K&N kit yet though.
Most likely it is your battery. If you have a i4 consider swapping out the battery to a v6 battery. Maxx Everstart battery is popular for the battery upgrade mod: www.driveaccord.net/forums/86-9th-generation/377026-battery-replacement-upgrade.html
Swapping out the intake to the K&N intake will not cause a check charge system warning on the dash. That message only comes on when the battery is low.
Alright. Thanks Jeff!
If my car isnt turbo it can be useful?
Did this install cause u problem and did it confused your cars computer causing check engine light ?????
No, If you have check engine light after install then most likely the MAP sensor was not reinstalled or damaged during install.
Does this fit on a 2005 accord euro k24?
I heard these make ur car run rich thus shortening the lifespan
Will this fit a 2017 Nissan Maxima?
Hey , I enjoy watching your videos. They help me a bunch when it comes to installs for my sedan.
Maybe you can confirm this for me, I was looking at the K&N site and these are not CARB legal, so won't pass Smog is that correct?
Andy Cheng it is carb legal for my year. check out the link in the video description
DIY: Car Modz do you think it will be carb legal in the future or so? Cuz I own a 2015 and I don't want to do the mod and then have to take it off and put the OEM one back on
Andy Cheng I have a 2017 accord and it's carb legal
@@DIYCarModz have you passed CA smog test with this install?
@@fawadazizi3967 2017 Honda Accord 2.4L L4 Gas All Models Street Legal in All US States: No This is from K&N website.
How did you get this ship to you Jeff? I tried ordering through Amazon but they won't ship it to me bc I live in CA.
select different seller other than amazon.. or buy it from autoanything
@@DIYCarModz 📹 on youtube.
Super helpful - simple, thank you!!!
where can I get this. part if your in California?
What exhaust system do u have bro, that sounds really nice
its probably just the air filter it makes a honda sound like that
Thank you. Made the job easy for me
does this work on 08 honda accord v6
How do you get shipped to CA
why does mine make a squeal sound :( around 2000rpm
Will this void a warranty?
Is it stock only filter?
Hi Jeff, Do you see any impact on gas mileage? Increased, Decreased or stay same?
keyun mistry less mpg because I keep on stomping on the gas to hear it whoooomp!!!
Yaa man I'm debating whether I get one or not. I'm driving about 100 miles a day 80/20 highway/city so millage is very important for me. Thoughts?
keyun mistry I just filled up today.. gas light was on... 340miles. I drive steep hill 60/40
I have one on my 14 Accord Sport and its increased my mpg 1-2 mpg. I was getting a consistent 28 mpg stock and now am getting 29-30 mpg. I got 34 mpg on our trip to south Carolina last year, we are about to leave for SC again tomorrow, I'm gonna see what it gets this year with the K&N. Seems worth the investment to me just as long as you keep your foot out of it haha.
Yaa I don't have heavy foot but I do drive a lot and 60/40 hwy/city.
Is this carb legal for California?
Nice video, cheers.
Would this be worth it for the 2017 Accord Sport SE?
You da man
Its a diesel accord???
Have you noticed any significant power gains?
nikom05 you probably lose power running an aftermarket intake without a tune and honestly even with a tune youre lucky if you get 1whp. If you want real gains. Look at cams downpipes header.
Thanks for the info!
So is this piece, KN filter, legal in so cal?
CARB sticker was included in the package.
Do you think it's worth the install? Would you say you are loosing air flow, gaining air flow, or about the same?
This mod is purely for the sound. Nothing more, nothing less. if anything you would want to pair this mod with PCD RV6/downpipe + exhaust + Ktuner.
DIY: Car Modz just installed it. wasn't impressed, even the sound is sub-par.
you need to hit 3K + rpm.
DIY: Car Modz I did. went up to 5k, not impressed. looks nice though
Review thus far?
Do one for the 6 cylinder model, everyone does the 4 cylinder