2008 VW Jetta | Adding key and remote programming with Autel IM608

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 30

  • @kawamorad4753
    @kawamorad4753 Год назад

    Profi👍

  • @elcapitan6605
    @elcapitan6605 2 года назад +1

    I programmed new key to VW without that extra box, just with laptop with Delphi Cars diagnostic software, you can use VCDS also, no need for any key-programming box with VAG keys

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      Yeah there are software that works pretty good on VAG keys, i have used VCDS but you need code to login and able to programmed keys. The Delphi Cars Diagnostic, haven’t yet, thanks for the info. The box that we used pre-programmed the key before it gets to program to the car, its just the procedure that the programmer has.

    • @andrebricolage7875
      @andrebricolage7875 3 месяца назад

      I have a key for VW jetta city 2007 , I transfer the chip on the original key the car start so this works, the only thing this new board comming with the new key is not working but the light will turn on as I press each button.Can I program it the Delphi C ars diagnostic

    • @misternomister8012
      @misternomister8012 Месяц назад

      ​@@carsnkeysautomotive
      Hi
      Do you know why in the process of reading the pin from autel im508, I get an error on the control panel.
      The tool properly reads the pin, adds the key, but an error remains on the board. This has already happened to me twice when making a key for Fabia 1, 2006 and 2007 years of production.
      Thanks

  • @stevelemley8446
    @stevelemley8446 Год назад +1

    My mom took her car to the neighbor that had a scan tool and the 2007 jetta remotes from dealer were working before but after the trunk stopped working .push unlock once and driver unlocks,push unlock twice all doors and trunk open.what key programer would change it back.the im608,tool max pro ,linsdor or auto pro pad or km100.i only have a ms919 and other diagnostic tools thats not for keys.i dont mind having extra tools in the shop.i mostly work on ford, hyundai ,mazda,toyota

    • @carsnkeysautomotive
      @carsnkeysautomotive  Год назад

      what was the reason that the neighbor scanned the vehicle? did you ask if he did something? I don't think you can change a VW remote setting, it's easy to program a new one, program the new and see if it is something with the system or the remote it self. Remote can be bought separately. the IM608 is good, comes with diagnostic and key programming.

    • @stevelemley8446
      @stevelemley8446 Год назад

      @Cars & Keys Automotive not sure my mom passed away and I haven't personally talked to the person.she just said the neighbor did something with tool and key buttons changed after.the brake booster needs to be changed ,transmission shifts weird at times.i had alot of projects I was messing with so didn't have time for it.i got the car now in my city .not sure exactly which neighbor too.doesnt the key tool max or other programmers have a feature to change what button controls what feature.seems like I seen it before on a device someone used

    • @mandybaker8544
      @mandybaker8544 Год назад

      The programmers just set the remote for the basics.

  • @yemenstudio398
    @yemenstudio398 2 года назад +1

    i have 2014 vw jetta 1.8L push start button i bought from the auction wrecked it came with one key but does not run and its showing no keys on the system try to add a key with my Autel im508 once the procces almost done on last thing fail learning key any suggusting

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад +1

      The Key blade start it does let you to do by OBD but push to start gives you the option but if the process fails, most likely need to do it on bench (remove cluster)

    • @yemenstudio398
      @yemenstudio398 2 года назад

      @@carsnkeysautomotive the key got with it open door munal but looks like car brain lost key because its showing 0 keys on system

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад +1

      @@yemenstudio398 yeah that too, but maybe they just cut the key and couldn’t program the new key, thats why showing no key, I recommend doing on bench, specially when its push to start, I think that year the immo it’s decrypted.

    • @yemenstudio398
      @yemenstudio398 2 года назад

      @@carsnkeysautomotive I'm thinking maybe the immo module is bad

  • @VanTran-ee2hl
    @VanTran-ee2hl 2 года назад

    Hi, where do you buy all the blank key?

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      American key supply, key innovation or locksmith keyless, you’ll need a business license to be able to buy with them

  • @mujaahidgoliath9758
    @mujaahidgoliath9758 Год назад

    Do you have to do the key adaption to vehicle before you try to add the remote, because I had the original and wanted to make a spare for a t5 transporter, but i went with cloning the chip with the key tool max, but when I go to do the remote control learning the hazard lights cycle and the im508 says the learning succeeded but it does not, if I program the original separately the remote learning works and im able to cycle, but when I use the xhorse key to start the vehicle, it does start but when i switch it off and go to test the remote of the original key that was able to learn, it somehow just stops working, is this because the adaption process was not done? Or if you know anything else please help? Thanks🙏

    • @carsnkeysautomotive
      @carsnkeysautomotive  Год назад

      Hey, I don’t recommend to do cloning, specially with European vehicles, its better to use one of the same key as the original and program directly to the vehicle, but not a xhorse. I think it’ll be because its a cloned one that’s why it’s doing that.

  • @jeffh3938
    @jeffh3938 2 года назад +1

    Dear sir
    I tried to program a key for caddy 2004 by im608 but i failed to communicate with the car…caddy key chip is 44 and unclonable plz help
    Thank you

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      Are you adding a key or AKL? Do you have another programer that you can try? IM608 sometimes doesn’t work on VW year 2005 and below by odb on AKL.

    • @jeffh3938
      @jeffh3938 2 года назад

      Im adding a key / i used autel 608 and key tool max with mini obdii also i used t-ninja 1000

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      @@jeffh3938 yeah, if the programmer doesn’t have communication, you can’t add a key. Only way is on bench with your im608 or VVDI

  • @Cali415
    @Cali415 2 года назад

    What if it’s all key lost situation?

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад +2

      You can do with IM608 as well, select control unit-immobilizer-and see what options gives you there- backup immo, (back up abs if it gives you option), very important in case you lost communication or gets erased-and after start backing up immo, if it gives you pin on screen, take picture, it will ask you to make dealer key and from there you almost done, just follow procedure to learn key, It might take some time to read and back up immo data, if it fails check your connections and then try it again

    • @Cali415
      @Cali415 2 года назад +1

      @@carsnkeysautomotive thanks for the in-depth reply brother! So we don’t need to solder anything??

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      @@Cali415 VW 2000 through 2005 yes it might give you hard time to do AKL by obd. You’ll need to do it on bench with autel adapters or VVDI.
      but 2006 and up you’ll be able to do it by obd, Eeprom is the last resort if doesn’t do by obd. If you have the im608 you’ll be fine, just don’t forget the backup, it can save you some hard time

    • @Cali415
      @Cali415 2 года назад

      @@carsnkeysautomotive 2000 to 2005 I’ve done with Auto Pro Pad just fine through OBD, most of the time it works. I will definitely try doing 2006 and up though with IM608. I have adapters but never used. If you ever have to do one on bench, can you upload a video showing the whole process? Especially the part of where to find the module on the vehicle and how to remove it…that would be amazing! Thanks again brother for all your advice!

  • @rajushaikh9045
    @rajushaikh9045 Год назад

    Century

  • @سالم_رمز
    @سالم_رمز 2 года назад

    Hello dear. May I know the price of this programmer? Autel im 608

    • @carsnkeysautomotive
      @carsnkeysautomotive  2 года назад

      You can get it between 3k and 4k depending the adapter you add to it, the programer is very handy!