Yo! Followed your exact setup, for some reason, the remote wire to the 5amp fuse (rear cam), doesnt seem to be receiving signal.. But bypassing remote straight to power on the amp works.. Where else can i run remote to get power?
why did you only tap into the one wire instead of both speaker i understand its a mono block but wiring part confused me alittle can you clarify thank you
Hi Stephen, Could you please post a video on how to remove the driver door panel or at least provide some basic instructions - I have to replace the broken check door on my BV and couldn't find anything on this topic. Thank you
Allison Currie Yes I did find the door panels removal procedure for Verano's European sister Opel Astra - the door panels are absolutely identical so the procedure can be applied to Verano's doors, only thing is, they show what it is for them to be a driver's door (british Astra). You only need a set of door removals tools which can be bought for aprox. 5-10 US on e-Bay. See the link below: www.vxoc.org.uk/forum/Thread-How-to-remove-door-cards
Everything is cool but you really need a active line ojt converter like lc2i to fix the bass roll off issue. If not you will not get good power because the car is set by factory to make bass lower as you turn up in order to save speakers. Lc2i restores the bass
I think that's more relevant for the ones that have the Bose system. You can tell because it usually nerfs the bass. I would recommend getting a better LOC like the Kicker KISLOC that uses the remote wire for 12v. I saw a review where it put out the most volts without distortion compared to other cheap LOCs.
@@harleymichael83 the LC2i has that it's very popular. The regular kicker LOC is not powered. The higher-end kicker 47keyloc has the power to amplify the signal. But it doesn't even have lights to adjust it to make sure the signal isn't distorted. The audio control LCI line is just better every auto sound place grabs them first.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
What I ended up doing. Is removing those two bolts on 00:50 and drilled it when I was removed. Beat having to work in a tight space with a drill.
Yo! Followed your exact setup, for some reason, the remote wire to the 5amp fuse (rear cam), doesnt seem to be receiving signal..
But bypassing remote straight to power on the amp works..
Where else can i run remote to get power?
I know this has been a while, but I just wanted to say thank you. This has been very helpful.
No problem
THANK YOU! This is by far the most helpful info I have found for adding subs to my 2016 Lacrosse. Well done!
Follow me on Facebook... Check out my big reveal I will be doing tomorrow!!!!
John^
Do I need a specific radio or can I use the stock one?
You saved me 350 install brother. Thank you
Just to be clear the two positives were wired together and went to the blue and the two negatives were wired together and went to the blue/brown
En dónde se encuentra amplificador
Catching up on all old videos
One question bro the left side speaker wire is blue and blue/ brown. What color is the right side?
I know on the lacrosse it’s green/green black…don’t know if it will help for this vehicle though
I have a question about your subs but do you have a IG?
Yo man thank you for this video. I have a 2015 Buick I’m about to put some beat in. This is so much help
I have a 2017 lacrosse and I try to do this but I have a major engine noise when the car is in drive any suggestions would be greatly appreciated.
Sand to bare metal around the ground
Ground going to the amp
If that doesn’t work buy a ground loop isolator
I have a 2012 lacrosse will this work for me ?
Any aftermarket radio for this car
why did you only tap into the one wire instead of both speaker i understand its a mono block but wiring part confused me alittle can you clarify thank you
nick parlavecchio looks messy if you try to run the other side, also customers budget on this one
Hi Stephen, Could you please post a video on how to remove the driver door panel or at least provide some basic instructions - I have to replace the broken check door on my BV and couldn't find anything on this topic. Thank you
Nick Manfredi The car is long gone, it was a customers car.
Nick Manfredi did you ever find any instructions on how to remove the door panel???? I can't find anything online !
Allison Currie Yes I did find the door panels removal procedure for Verano's European sister Opel Astra - the door panels are absolutely identical so the procedure can be applied to Verano's doors, only thing is, they show what it is for them to be a driver's door (british Astra). You only need a set of door removals tools which can be bought for aprox. 5-10 US on e-Bay. See the link below:
www.vxoc.org.uk/forum/Thread-How-to-remove-door-cards
I have a 2013 with the scorched loc2sl would it be the same concept with the wires and such
ryan cason let me look it up for you
ryan cason Looks all the same for first gen Veranos, but no guarantee. I had to take the door panel off to get the speaker wire colors for the LOC.
Thank you
ryan cason No problem
I have a 2017 Buick Regal Sport Touring this is the closest video I've found to my year and as far as seeing it set up....
what adapter do I need for the head unit ? I have the same car and want to keep my stock radio
Lineout converter
Things changed big time you can buy one with a remote wire
Where?
jay millz ebay
Everything is cool but you really need a active line ojt converter like lc2i to fix the bass roll off issue. If not you will not get good power because the car is set by factory to make bass lower as you turn up in order to save speakers. Lc2i restores the bass
where i get that
I think that's more relevant for the ones that have the Bose system. You can tell because it usually nerfs the bass. I would recommend getting a better LOC like the Kicker KISLOC that uses the remote wire for 12v. I saw a review where it put out the most volts without distortion compared to other cheap LOCs.
@@G00DZ1 just google it it's very popular in the auto sound industry
@@harleymichael83 the LC2i has that it's very popular. The regular kicker LOC is not powered. The higher-end kicker 47keyloc has the power to amplify the signal. But it doesn't even have lights to adjust it to make sure the signal isn't distorted. The audio control LCI line is just better every auto sound place grabs them first.
Do you know if the radio has a subwoofer output ?
Paul Hadges It doesn’t, that’s why you need an LOC
Thank you for your video. It was very helpful.
Clean install man!
Bj Hammon Thanks BJ.
Guud stuff homie👍👍👍
Hey I need you show me how to do that I got a 13
what is the name of the amp adapter that you use
Ruben Rojas PAC line out converter
Outta curiosity is there a way I can add 6x9s to this car I see an opening just no wires
Ryan Cooper add wires
I have a 2011 regal that I've done alot of customizing/modifications... 6x9 blow way too quickly. Drop in some 6.5 if you gotta cut a hole
How do I know which color wires are for each speakers?
Jeffrey Delgado Google
I got some speaker wine in going to check my ground
out in Colorado
What color is the memory wire
It’s been a while, I forgot
@@SteveDavisCarGuy . I had been a minute