Just got my Rampage Shirt, Looks great! Love the progress and don't mind the rude comments about taking too long, That wagon is turning out amazing because you are not cutting any corners. Take all the time you need.
Incredible work Dave! Have been waiting for an update. & this is a very comprehensive update. The work you are putting in is monumental! Agree about the polishing. It’s such a crucial element. Have someone who does it all the time to get the best results. It’s inspiring the effort you’ve put in. But you could never overcapitalise. Good fodder for the mind. Cheers mate 🤙🤙🤙
When I load a low profile vehicle on my Dove tail trailer I use 2 2x8 boards 4 feet long. I put them on the bottom of the ramps. They raise the front end up and clear the ramps.
It’s crazy, I’ve been waiting for this weekend to replace all the wiring in my engine bay (93 YJ), and I figured I’d let the coffee kick in first and watch this video. Seeing my wiring harness stretched across the living room while you’re talking about wiring the magnum lol And get the wing ain’t bad, def nice than not at all.
Melted is never good in your electronic contols an such, lol good day for walk in the yard tho. Getting down to the bits and pieces now, you got this wiring task and you will be driving in style soon good luck.
Dope man! cant wait to see it finished. Do you plan on lowering the suspension? I know its raised up because it doesn't have anything in it - but after that?
Hi Dave, This is the enjoyable phase for you now. After all the hard work so far, getting to see it come together. Enjoy man, so well deserved, Cheers 🍻
Hey Dave I been following your channel for quite some time now I must say I'm very impressed. I got a question for ya. I have a 2016 charger and I'm having some wipers issues what will cause my wipers to run with the switch off and my headlights flicks after every full cycle of the wipers can u please help me out with a lil advice thanks!
hi Dave, don,t know how to reach you in another way.I have a 2006 Magnum R/TT and the engine is seized.I got an offer for a 2006 Hemi from a Dodge Ram.Do you thiink that would fit with all connections? Thank you!
Dave, This is a beautiful car and I’m not knocking it but when you look at it from different angles you see a difference. The top of the glass between the rear and side windows aren’t even and it throws you off. It makes it look like it’s bent in the middle of the roof.
Dave logic; can fully build a car from pick and pull parts chassis splicing and customizing. To splicing wiring going to Ecus and modules for his Frankenstein car born from the skeletons of three separate dodge platforms. He is capable of editing and balancing suspension, drop and pulling the engine. Has done slight to major frame work , actively scouted and obtained parts cars for multiple projects , 3D printing even fucking diagraming lol but buffing the car is a no go lol gotta love this guy honestly
All the insta-grat brats: Yo Dave, when are you putting a motor in this sled??? I'm getting tired over here!!! Dave: did I miss blocking out that spot with 600? I did! I did!! More 600 grit and then 1000 grit!! You keep it up, dude, your work will speak for itself and it's the body everybody sees most!!!
Dave you seem to know everything about these cars I have my two back wheel wells to replace are there any replacement panels for 2006 magnums for the rear? The rust belt is a killer.
Hellcat red eye motor if I recall right. Track hawk drive train, modified suspension between track hawk and challenger. Body is charger, challenger and magnum combined. He is also have a custom rear wing that is a modified track hawk that’s been molded and chopped to the hatch of a magnum. Roof is a combo of charger/magnum and custom molded carbon fiber.
@@meseone920 The interior is Charger, Challenger (Dashboard) and Magnum combined, the exterior Body is Charger and Magnum with small bits from Chysler 300.
Dave you should check out d.i.y gang on RUclips he's making a all wheel drive hellcat challenger maybe you guys can exchange any information maybe you can help them or maybe they can help you their playing with their wiring harness as of now
Your entire 18:35 minute video is you talking. My opinion is that people want to see work being done, not you just talking about all that needs to be done etc. I skim through your videos most of the time because of this and I bet others do too.
On the low Dave has a serious car collection.
This Magnum is going to put a lot of pressure on them Magnum fanatics,I'd say keep applying that pressure Dave.
Thumbs up from a supercharged LS3 owner who's going hellcat hunting ALL SUMMER!!!😁
Yo whoever helped dave with the wiring diagram you da real one man. Dave get this man a rampage shirt he earned it.
Saw on Kahl srt someone said “junk yard Dave is making a srt station wagon”,I appreciate that I came across this channel. Dave also shows his tricks.
Are you going to make a time lapse build on this?
Just got my Rampage Shirt, Looks great! Love the progress and don't mind the rude comments about taking too long, That wagon is turning out amazing because you are not cutting any corners. Take all the time you need.
I agree! That thing will be glass.
Incredible work Dave! Have been waiting for an update. & this is a very comprehensive update. The work you are putting in is monumental! Agree about the polishing. It’s such a crucial element. Have someone who does it all the time to get the best results. It’s inspiring the effort you’ve put in. But you could never overcapitalise. Good fodder for the mind. Cheers mate 🤙🤙🤙
When I load a low profile vehicle on my Dove tail trailer I use 2 2x8 boards 4 feet long. I put them on the bottom of the ramps. They raise the front end up and clear the ramps.
It’s crazy, I’ve been waiting for this weekend to replace all the wiring in my engine bay (93 YJ), and I figured I’d let the coffee kick in first and watch this video. Seeing my wiring harness stretched across the living room while you’re talking about wiring the magnum lol
And get the wing ain’t bad, def nice than not at all.
"limited slip control module" Holy shit, talk about over-engineering the plumbing.
Can’t wait to see the blue paint after its done
Thanks for the update Dave , and the great tip on the door handles.
You will always be the man in my book bro.
All the time you have spent building this car is almost ready to pay off for you. Its looking amazing.
I hope the company buffing your car does a better job than when you had the dealership bleed the brakes on your Hellcat.
Many good positive comments!!!
Dave this is looking awesome, congratulations man!
I can not wait to see this rip!!!!!!
You are to perfect love to watch
A fan from the Netherlands keep up the great work
Waiting patiently for the next video.... Magnum/Charger.....
Coming along beautifully bro👍🏽🔥... blessings🙏🏾
It'll look Perfect! on staggered wheels!!!!!!
good luck with the wiring and the magnum's wing is better
Found your account through some guys comment on a similar car 💪🏽
The image promises much more than the video shows
Great job dave awesome as ever she looks amazing 👏🏻
I cant wait for the heart and Brian's to be in the car 💪🏽😎
"FIND THE PARTS AND GET'ER'DONE!!!"
I can’t wait to see you finish this bro 😎 let’s get it 🤟🏿🤟🏿
you are making history
Make another one of these but keep the magnums style on the back and make the front charger style
On this episode we're putting in one seat and the gas cap.. next episode be ready for one of the two mirrors installation
😂😂😂😂bruh! I been thinking this!!
I put a shelf together and thought I was the man.
Should do a carbon fiber hood and make a trunk lid yourself to match the roof.
Fuck carbon fiber hoods
Yes more wagon content 👏
Good tip on the door handles ...
That thing is sick
lol the buffing is the easy part Dave
Nice progress, looks like side projects haven't slowed this man down at all 👍
4:37 poor little Astro van 🥺🥺🥺🥺
It's looking good so far. It will be nice to see it finally coming back together.
I'm still curious on what your plan is for the interior since theres nothing really made for it since it's now a wagon
Someone beat ya to it eh? Doubt its a hellcat AWD, but yours is wayyy better!
Time to find and procure a track hawk with more parts that are scavengeable...
This build is going to be epic once it's finished.
Melted is never good in your electronic contols an such, lol good day for walk in the yard tho. Getting down to the bits and pieces now, you got this wiring task and you will be driving in style soon good luck.
You should re wet sand the car with 1500 then 2000 make the car buff easier and gives it a better shine
Dope man! cant wait to see it finished. Do you plan on lowering the suspension? I know its raised up because it doesn't have anything in it - but after that?
It will be an inch lower than factory
@@Junkyard_Dave muy bueno
the magnum is going to look so cool when its finish. great job bro
Got the Rampage Tshirt. keep up the good work
So close Dave! Can't wait to see it back from being polished!
Hi Dave,
This is the enjoyable phase for you now. After all the hard work so far, getting to see it come together. Enjoy man, so well deserved,
Cheers 🍻
Jumpin right on this....
Maybe Im wrong but the Challenger front fender's paint dont seem to match the door's color? It seems darker.
Dave, this thing is awesome. Why wouldn't Dodge make this? Wagons are awesome!
You put them in a very safe place... Duh!
Hey Dave I been following your channel for quite some time now I must say I'm very impressed. I got a question for ya. I have a 2016 charger and I'm having some wipers issues what will cause my wipers to run with the switch off and my headlights flicks after every full cycle of the wipers can u please help me out with a lil advice thanks!
hi Dave, don,t know how to reach you in another way.I have a 2006 Magnum R/TT and the engine is seized.I got an offer for a 2006 Hemi from a Dodge Ram.Do you thiink that would fit with all connections? Thank you!
Dave, This is a beautiful car and I’m not knocking it but when you look at it from different angles you see a difference.
The top of the glass between the rear and side windows aren’t even and it throws you off. It makes it look like it’s bent in the middle of the roof.
Looks great dave
FINISH IT ALREADY!!!
Come work on my 06 dodge magnum. 137000 she needs some love
When will this car be done ✅ I’m ready to see the end result!!
Honestly I don’t know what happened to this car but why did he mess up the front? I hurt he’s turning it into a wagon which is cool!
That's badass 😁🤘
Cant wait to see it ripping tearing the streets up
Why not cut off the burnt piece of the harness find matching wires on the other set
Dave logic; can fully build a car from pick and pull parts chassis splicing and customizing. To splicing wiring going to Ecus and modules for his Frankenstein car born from the skeletons of three separate dodge platforms. He is capable of editing and balancing suspension, drop and pulling the engine. Has done slight to major frame work , actively scouted and obtained parts cars for multiple projects , 3D printing even fucking diagraming lol but buffing the car is a no go lol gotta love this guy honestly
Nice
It’s good to see you still have the Z
Would the Demon wheels fill up that wide body?
15:15 lol
Looking good 💯💯💯💪🏾‼️
All the insta-grat brats: Yo Dave, when are you putting a motor in this sled??? I'm getting tired over here!!!
Dave: did I miss blocking out that spot with 600? I did! I did!! More 600 grit and then 1000 grit!!
You keep it up, dude, your work will speak for itself and it's the body everybody sees most!!!
It's really coming together 🔥🔥🔥🔥🔥🔥🔥🔥 I would luv to take a ride in it
Sometimes its a good idea to back the car onto the trailer. To avoid front bumper removal.
thanks for the sweet content Dave
How come it’s been wet sanded so many times?
Kind of pointless when he hasn't even installed the drivetrain yet. Gonna get greasy finger prints all over it.
@@badgergarage But the clear wrap will prevent greasy fingers from touching the paint.
@@badgergarage its called windex and a rag jackass
Someone beat him to this one video online already of one
no one beat me to anything
Wow it’s ok still a cool car
Like the channel but I can't with all the talking... smh 😀
Dude is explaining his logic/approach. Pretty useful if you're into this...
I buff I feel like it’s really easy
I do as well. I recently got into a shop that has me cut buff 70-72 K5 blazers. Start at 1000 grit to 5000. Looks amazing when their done
Dave you seem to know everything about these cars I have my two back wheel wells to replace are there any replacement panels for 2006 magnums for the rear? The rust belt is a killer.
345/30/20 please!!!
U better really be put a hell cat motor in that car
✊🏽🔥🔥🔥
What motor are you putting in this?
3.6l Pentastar
Hellcat red eye motor if I recall right. Track hawk drive train, modified suspension between track hawk and challenger. Body is charger, challenger and magnum combined. He is also have a custom rear wing that is a modified track hawk that’s been molded and chopped to the hatch of a magnum. Roof is a combo of charger/magnum and custom molded carbon fiber.
@@Angel-xj3wf Whut? I though he's going with an 2.5l Iron duke.
@@Enakaji man you just aged yourself😜 but I aged myself because I understood
@@meseone920 The interior is Charger, Challenger (Dashboard) and Magnum combined, the exterior Body is Charger and Magnum with small bits from Chysler 300.
Hi
👍🏽🔥🔥🔥
Dave you should check out d.i.y gang on RUclips he's making a all wheel drive hellcat challenger maybe you guys can exchange any information maybe you can help them or maybe they can help you their playing with their wiring harness as of now
Dave knows, they've been helping each other out already before.
Cool
Bro you need to move on stop with the body stuff get to the engine get to mechanical parts I get in tire
Your entire 18:35 minute video is you talking. My opinion is that people want to see work being done, not you just talking about all that needs to be done etc. I skim through your videos most of the time because of this and I bet others do too.
Not gon lie it’s taking u way to long to finish this build
Yes! It is
First
First one
Man I love this bill but you talk a lot
sir , you are very slow in progress , other garage can built many cars in the same amount of time
please try to focus on working instead of talking
You talk to much just show the build and the progress you have a cool build but you ruin it with all your talking and over explaining.
Just don't watch the Progress if it annoys you. Wait for the "building the Charger wagon in 10 minutes" video (if it happens).
I’ll just wait until you work to look at your video because you freaking talk more then work
Every video has less and less content
20 mins of talking and no real progress.