My husband and I made 6 of these last year (from Grant's original blowgun video) for Christmas gifts. They do indeed work perfectly with mini marshmallows as well as standard nerf darts. Pro tip: You can easily sight in the laser by just staring through the barrel (like a telescope) and aligning the laser dot to be in the center.
I love how grant use to work really hard by him self and you would see him in every video now he does not even seem to be around in his own house when these two are in and making the videos
A 36 inch piece of .40c copper tubing, a cheap Lazer pointer,some gorilla tape to attach Lazer pointer,and .40c darts from Amazon,works great too,and cheaper.
As a blowgun shooter, better make sure that two sections of PVC pipes are cut from the same pipe! Different pipes connected can have different variations inside the bore, and a cone can be jammed in there if the size is not correct. Blowgun is a precision instrument.
I made something like this YEARS ago using only 3 items ... (1) 30" long piece of metal conduit or pvc pipe (2) 6 or 8 penny nails (3) masking or duct tape for the fletching. Just for fun we used my air compressor @ 120psi ... It would "drive" the dart thru a phone book. Oh yeah, assembly time was less than 5 minutes.
You can also bore sight it at a known distance. Mark out 10m and set the blow dart in a vice loosely. Look down the barrel until the target is on the middle of the bore (or barrel) sight. Tighten the vice and aim the laser at the target. Shoot your first shot then adjust the aim to meet the laser, rinse and repeat till the dart lands on the laser.
I had a thought about a fun liquid nitrogen experiment: which different container/cup: solo cups, vacuum insulated cups (yeti), styrofoam cups, plastic tumblers etc, holds liquid nitrogen colder longee
KOR build amazing things, has many tools, showing kit that has EVERYTHING you need...... uses TABLE KNIFE as screwdriver..LOL. keep up the great videos guys
It's the time it's saving you from having to figure out what exact pieces to acquire and going to get them. There are literally hundreds of pieces/types of PVC in hardware stores. Plus this comes with easy to follow directions. Great for kids for Christmas as it's easy for parents to order for their 12 year old. And the fact that you literally need nothing else (basically) - paying for CONVENIENCE. I'd still buy parts separately for like under $10, but I can drive.
You can use duct tape when you run out if paper. I have found that duct tape is more durable and water proof. All you do is make your cone with the stick side out, then take another piece to cover the exposed stickiness.
I had an idea for a modification. if you're doing this with marshmallows in a battle royal game, what you could do is attach a strobe light on the side so when you're reloading at close range just turn it on and your opponent will be distracted
“The kit of random”😂😂
Lol
Abubakar Niyaz dammit I was just about to post that as soon as I saw this video
Well he shows you what's in it so it's not random...
R/woosh my self before you can (;
So sad that you can’t ship your product here in the Philippines and California.
:((
Cry true
I approve of this KIT.
Well, it is your 2019th birthday, so.....
Omg
See ya when i die
And I approve of Communism also nO lOnG TerM DamAgE
sun to
Jacksucksatlife
Sorry you were banned
My favorite project you’ve made. Rest In Peace my King😞
Juul Juice that was the first video I saw from him
why what happened to him?
Aldrin Vargas sadly 😭😭 yes!!!!
chris.hincapi in a paragliding accident
@Wayne Smiles yes
Reuploaded? I’m confused
XKS10 I think
What are u guys talking about?
Yea it was reuploaded
YES
I was thinking same thing.
My husband and I made 6 of these last year (from Grant's original blowgun video) for Christmas gifts. They do indeed work perfectly with mini marshmallows as well as standard nerf darts.
Pro tip: You can easily sight in the laser by just staring through the barrel (like a telescope) and aligning the laser dot to be in the center.
Thanks
Thats cool man
Even with the zip ties and glue ethos instead of the screws?
DISCLAIMER: Does not include hosts to show you how to make it!
Engineer 7 youtube!!!
Well, what is this video then? Huh?
Omg do you guys not get jokes
MiniWolf 697 no, they so not
I never thought of that
Click for the Kit: bit.ly/2OuQdPO
For kids of all ages
So kool
Sweet
Released 40 seconds ago, the comment is 2 hours old lmao
Awesome idea guys
Parents: what do you want for Christmas?
Me:
Glazey NR same
Whut
Nothing, because it's a pagan scam
You should make a trash can foundry kit.
Like so they see this. ☺ thanks for all the likes
The Real Gamer yes
I made my own. It was easy! However, shipping would cost more than the materials!
Do that
If you can shatter a rose when it’s cold than can’t you grind it up and make rose powder?
Lol
Then try rehydrateing it
Will it become rosé?
Please do this
I have no idea!
Didn’t this already get uploaded?
Yeah i watched it yesterday lol
Same XD
Yes yes they did
Yeah
Yes it did. They took the other one down and uploaded this one. Idk why tho
The nostalgia of me wanting to have one when Grant first made it
same here
Sameeee
I actually made one when that video came out lol
Alan Huynh I call it dayjaavoo
I was going to but i didnt soooo...
yeah.
didn't you just post this same vid previously
That's what I thought, I was hoping it was a new Kit with the Leggo Drone in it.
Same
Yeah that's been happening a lot I noticed it on the one on how to make the fake bruises and cuts
Yes it’s strange
its the same vid, they change the names though
I love how grant use to work really hard by him self and you would see him in every video now he does not even seem to be around in his own house when these two are in and making the videos
same
Logan Smith sadly he passed away recently
*comes home from school*
Me: YESSS NEW TKOR VID
*clickes video*
Me: AW DANG
👨🏿😂😂
The waving Grant is awesome :D His persona is very inspiering
I miss the original The King of random with grant
Me too.
Where is he?
@@albashermusa8083 Gone, reduced to atoms.
@@rubenmakalinaw9750 That's actually sad bc he's not even in the intro or anything
@@szubiSND He probably retired??
9:30 o hi grant🙋♂️
I miss him😢
@GerArt13 He works behind the scenes, he wanted to spend more time with his family
The_soosh sadly he’s passed away
It cost $30 for the kit but the video on how to make it a few years ago says it only cost a few dollars to make
4:04 it looked so much like she wanted to stab him 😂 😂 😂
A kind friendly version of this is you replace the nail darts with nerf darts
For one of your builds you could attach a mini vacume chamber to the blow gun and make it more powerful when the pressure is released!!!!!
Does it come with the black gloves?
Hey Nate and grant, put in some black gloves too lol
Feature that girl more,she is really fun and goes great along with Nate.
@gaming vloger2 Too personal? (although i want to know to :D)
Keep her on the show
aye what happened to the old guy
gnuoy emmorts Bill?
gnuoy emmorts he retired
Suggestion: Allow the customer to customize the contents of the kit...Example:if the customer already Glue gun....
yea cause having an extra one is such a hassle lol
@@xkilo HAHAAHHAAHAHAHAHAHAHAHAHAHAHAHAAAAA
A 36 inch piece of .40c copper tubing, a cheap Lazer pointer,some gorilla tape to attach Lazer pointer,and .40c darts from Amazon,works great too,and cheaper.
Yea you right but come on really merch is cool but I do respect you dude
Ok and what size is 40 caliber copper tubing
Rest in peace my king
Gone but not forgotten
😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
You’re right man , Gone but not forgotten ! Rest in Piece , Times tough this year
You have a kit. Now all you need is a Kat.
delet dis
weird flex but ok.
Depression Is Great odd bloast but understandable flex
LOL
ROFL
😂
As a blowgun shooter, better make sure that two sections of PVC pipes are cut from the same pipe! Different pipes connected can have different variations inside the bore, and a cone can be jammed in there if the size is not correct. Blowgun is a precision instrument.
This is actually awesome and it’s so reasonably priced! I was expecting $50/60 for the kit but for $30aud I’ll definitely be buying mine thank you!
Where am I suppose to get the "air" to blow through the tube to use it? Am I going to need a BREATH OF AIR as well? It seems your box is incomplete.
Tree not included
Funny
Awesome, now make a metal melting foundry kit!
I think they wouldn't do that because it can be really dangerous and its aimed towards kids
@@kc-ip2vc so are blow guns
Hello, I can't find this kit... Can you tell me where I can purchase this?
it would be really cool to see you guys build a dresser or bookshelf with a bunch of secret compartments.
I made something like this YEARS ago using only 3 items ... (1) 30" long piece of metal conduit or pvc pipe (2) 6 or 8 penny nails (3) masking or duct tape for the fletching. Just for fun we used my air compressor @ 120psi ... It would "drive" the dart thru a phone book. Oh yeah, assembly time was less than 5 minutes.
I’m getting this for my birthday
SO EXCITED
A box that's filled with flex tape
H E L P no better would be a box made of flex tape
Be it should be ( I sawed my box in half and fixed it with flex tape )
I SAWED THIS KIT IN HALF! And repaired it using only Flex Tape.
Actually one year when I was a kid my mom bought me an entire box of Scotch tape.
Now that’s a lot a damage how about some more
Might buy one to pay tribute. Rest In Peace
N I C E
Put ooblek (corn starch and water) in the vacuum chamber! Not sure what'll happen but it sounds like it'd be interesting!
Why should you buy it for $30 if you can build it for under$2,50 like he said himself ???
Any crewdriver will work
*uses knife*
Who remembers when the original vid came out I watched it like 10 times lol
But what if i am from Europe? We have diffrent plugs for the hot glue gun ;((
Querty just get an adapter for like 2€
Most people nowadays have universal adapters for plugs
That's true. Thank you guys!!
Don't worry about it they don't ship to outside the US
You can also bore sight it at a known distance.
Mark out 10m and set the blow dart in a vice loosely. Look down the barrel until the target is on the middle of the bore (or barrel) sight. Tighten the vice and aim the laser at the target. Shoot your first shot then adjust the aim to meet the laser, rinse and repeat till the dart lands on the laser.
Can you burn Matchstick with blowgun?
How long does the shipping take while the Cronavirus is going on?😕
1 million year!
"The King Of Random" Is The Best...…..
I had a thought about a fun liquid nitrogen experiment: which different container/cup: solo cups, vacuum insulated cups (yeti), styrofoam cups, plastic tumblers etc, holds liquid nitrogen colder longee
This is actually sick
can we melt wood?
under the conditions we don't provide it oxygen or something so it doesn't burn but melt?
then you get coal, kid
It's called charcoal
That's not how it works
Yes it turns into charcoal
It's impossible to melt wood. Maybe liquefy it into a pulp, but that does not qualify with melting.
i saw the intro and i went straight to look at the price.
MULTI PURPOSE WEAPONS! SHEW SHEW!
KOR build amazing things, has many tools, showing kit that has EVERYTHING you need...... uses TABLE KNIFE as screwdriver..LOL. keep up the great videos guys
I made my own a year ago! I wanted to wait for a kit but I couldn't wait anymore! I wish you did this sooner
All i want for christmas is -you- this king of random kit
What happens when you put kinetic sand in a vacuum chamber??
Rest In Peace our king of random.. Rest In Peace... 😔
I hope that it makes you happy, I’ll miss you man it was fun
Looks like a fun project. Side note....wow is she stunning and funny 😍
how can i buy this
I didnt use the nail instead i used a cut off screw with a foam earplug.
I would buy this but I already have built 3 of these
You can get it all for under 10 bucks you look for the materials your self 29.50 is a rip off
It's actually under $3
I too did it
I just got my kit in the mail today thank you everybody can't wait till he opens it on Christmas
A mini metal foundery kit would be pretty cool i really do hope they make one
Lego drone kit?
Yes please TKOR
Lego Drone Kit
And
Copper Plating Kit
Pepelajuandeag 1 cool
On the video they have a link to a PDF for instructions. IDK what it says but it probably shows what you need, then just look online to buy it>
Hi I live in England and r plug socket r different do u have different plug heads for the different sockets
Get an adapter. :)
@@cripplekid0902 they dont ship there
Can you boil Shaving Gel?
Grant=king of random
Nate=prince of random
Callie=princess of random
I ordered it was only 30 dollars
I want that kit
You can get it all for under 10 bucks you look for the materials your self 29.50 is a rip off
koalaattack714 ikr
Me too
30 bucks?!
I boght one
me to
@@parkercooley3032 *too
Too expensive
How much?
Kai 30 $ for me wtf !?
I want one of the kit and love the pink tape and great detail
"Laser guided marshmallow gun." I'm sold.
I wish everyone a merry Christmas and a happy new year. lol we skipped thanksgiving tho.
Or instead of using nails as points for your darts, you can do what I do and, make custom, tempered steel, copper coated, points for them
Excuse me but that is to expensive for just some PVC pipe and a glue gun
29.50 is stupidly expensive 100% agree
Are you high? It's stupidly cheap!! Here a glue gun alone costs 30chf
It's the time it's saving you from having to figure out what exact pieces to acquire and going to get them. There are literally hundreds of pieces/types of PVC in hardware stores. Plus this comes with easy to follow directions. Great for kids for Christmas as it's easy for parents to order for their 12 year old. And the fact that you literally need nothing else (basically) - paying for CONVENIENCE.
I'd still buy parts separately for like under $10, but I can drive.
well enjoy cutting those pvc
The king did great on this kit
I'd love to see you do the Mercury and aluminum mixed experiment!!! Also love the videos!!
Did grant die or wut
No
I dont know why he is gone its not the same with out him
@@rp101aquatics6 hes made 2 videos explaining it. go watch
Coconut in a vacuum chamber edit pls like so they can see
first.
to like my comment and just first
not even close
No
You can use duct tape when you run out if paper. I have found that duct tape is more durable and water proof. All you do is make your cone with the stick side out, then take another piece to cover the exposed stickiness.
I like the idea of two hosts
I’d love to see you guys test what happens to different liquids in a Sodastream. Like flat soda, juice, etc
Marketing 101 this will sell much better than shirts and apparel.
Love it so cheap
i watch this every day till i get my kit i ordered it in the 2 day or the 1 one of them.
Definitely asking for this for Christmas. ☺ (If I can't get a cockatiel😂)
I had an idea for a modification. if you're doing this with marshmallows in a battle royal game, what you could do is attach a strobe light on the side so when you're reloading at close range just turn it on and your opponent will be distracted
Actually that kit is the best made kit I've ever seen.
No it's not the only kit I saw -.-
But so many things included
peeps: "oh~ a blowgun kit set!"
me years ago: "PVC, boys! LETS GO!"
Got one! Building it rn!
You should make a Co2 or Air duster powered blow dart gun!!
no you should do. Is put a lightbulb right by a plasma ball it'll turn on without it connected to any power source
Your website is a extremely user friendly and you do a great job
It would be amazing if you guys had a mini solar scorcher kit.
You should freeze foods and put them in the vacuum chamber. Like any food product
RIP The King
We will miss you
Loved
GRANTS BLOWGUN LOOKED COOLER AND HIS DARTS WERE GREAT
I know this is a little late but all you have to do is look through the barrel and the laser pointer should be in the middle of the barrel