Metalworking - Grinding aluminum with a flap disc
HTML-код
- Опубликовано: 26 авг 2024
- A tutorial/demonstration of sorts focused on how a flap disc can be used to create artistic grind marks in Aluminum, and how it is different from something like a surface conditioning disc.
Made a mistake near the start and said it was a 40grit flap, it's actually an 80Grit. Still has quite a bit of bite though.
Tools used:
Black & Decker 4 1/2" grinder
DeWalt z80 flap disc
3M half mask respirator with filters made for paint (probably overkill, but I paint more than grind)
Music (well, not really music, more like chords):
My own filler music I put together to add some variance to the grinder
__
Channel Disclaimer: Night Stone Art (NSA) provides these videos for educational and entertainment purposes. Always refer to the appropriate safety manual for any tool or paint you choose to use. All statements and suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state and local laws and regulations remains the responsibility of the user, and Night Stone Art is not liable or responsible for non-compliance. The user should consult a legal advisor or the appropriate government agency for information about laws applicable to their country and local area.
Love your videos. Excellent work sir.
So pretty!
How do you avoid aluminum clogging up your discs? As you must know, aluminum has a habit of melding to the grains and eventually rendering the discs unusable.
You said 40 grit flap disc, but your description says dewalt z80, and that's an 80 grit flap disc according to Lowe's. In this video, did you use the 40 grit or 80 grit?