Good demo. In the video it says you CAN adjust in/out up/down. Is there a video on how to adjust? Good to know you CAN adjust... far more valuable to know HOW to adjust.
Rev a shelf sells the wall lazy susan hardware. The lazy susans are designed to be installed after the cabinet is already in place on the wall. They sell lot sof sizes of lazy susan trays, so just remember that the hinges will decrease the opening a bit due to the thickness of the hinge itself.
Oh! That's great to hear! We certainly don't want to have to tear the countertop off!! lol I will see if I can find their site right now! Thank you so much for your help~
my l susan has a door that swings in. It is a part of the shelf. Can I adapt and use this door? it is much better. Plus, the door that swings in with the shelf, does not close well. Has a huge opening.
Hi! Great job explaining things. I need to put a lazy susan in a existing counter top corner. So would we just cut out the whole corner of the old doors and frame part? That old corner is so USELESS!! Is one able to jimmy those shelves and the lazy susan parts into the corner?? Or have you ever done that before? Thanks for your help in advance!
Why is there no instructions on adjusting the #Blum hinges in the video or on your website? Like you mention in the video, there are many available adjustments, and it would help to know what does what.
I want to replace many pieces of furniture drawers with the kind that you press on either side and the swivel open. But I don't know what this is called I heard it cold butterfly drawer or semi circle drawer especially things for nightstand where it's not very comfortable pulling out a drawer and also mean you're standing right in front of your nightstand and not in your bed then it's easy to pull out but the reason why I love these drawers is because they have an appeal to me for so many reasons. And all I keep running into all these Corner jobs. I was hoping you could tell me as I'm not a carpenter anything like that any help with that. Because I really wanted to some really beautiful Furniture I picked up that has great bones and a lot of drawers and it would look so beautiful and maple. But just start a completely cheap Ikea wood don't worry about that I just would love if you could point me in the right direction so that I would know what they're called what I need to get on a budget of course to take out the typical pull-out drawer or fashion it into the kind of drawer I'm looking for which is basically doesn't have enough you just put a little pressure on the left give a little push or to the right I would be so appreciative. My dad would know but he died. and if he can offer any more cool interesting things like that thank you so very much.
I have something like one of these but it fell off, and im at a complete loss on how to fix it. There's kinda a female and male end to it, but nothing to solidify the attachment. So I just kinda force it together and shut it, and of course it comes detached every time I open the drawer. Is there a tutorial for different hinges with the same idea? Because I I have this exact same setup, but I cant seem to find a way to fix it as the hinges are very different from what you show here.
My hinges came loose...... I can't reconnect them to the inside hinge. You just attach the clips to them when they are out of the cabinet. How the heck do you do it when they are hung!
In my experience it's Impossible to find a replacement screw, and the doors won't fit without it! The one I lost was apparently a type of set-screw called a 'Euro Screw'. I bought 2 different hinges and they weren't going to work to reinstall the corner cabinet (after I had removed them to paint them). Then I dusted under my fridge and Presto! there was the screw! Going to try once more to reinstall the folding doors.
Purple 911 - that’s not true. I can have a very small hole into which a bigger screw can be attached. Ask IKEA if they have issues with pre-drilling their millions of doors they sell every year.
Sigh.... If you wanted to use different hardware, hinges, etc.....they dont pre-drill. And they probably figure whoever is screwing them in isnt retarded or lazy and can manage that on their own.
The part I really needed to see was blocked by your back and your camera man did not try to help. I think you know what you are doing but I couldn't take away anything unfortunately
Big help 10yrs later in 2023!!! thanks playa
I found this demonstration invaluable - particularly the way to go about placing the clip plates (term?) on the second door. Many thanks.
Tons of adjustment but this is pretty much perfect even though I set it up with my knee 🤣Nice work, great instruction. Thank you
This video is what made me order through Barker door. Thanks so much, I was having trouble figuring out how to do this.
Good demo. In the video it says you CAN adjust in/out up/down. Is there a video on how to adjust?
Good to know you CAN adjust... far more valuable to know HOW to adjust.
Helped me tremendously. Thanks!
Couldn’t see the part I needed the most help with
Rev a shelf sells the wall lazy susan hardware. The lazy susans are designed to be installed after the cabinet is already in place on the wall. They sell lot sof sizes of lazy susan trays, so just remember that the hinges will decrease the opening a bit due to the thickness of the hinge itself.
what is the name of the hinge that attaches to the framed cabinet for the lazy susan style cabinet?
That was nice, i love the corner doors look, with that i guess a turning organizer?,,thanks for sharing this sir!,,new subscriber here!
Oh! That's great to hear! We certainly don't want to have to tear the countertop off!! lol I will see if I can find their site right now! Thank you so much for your help~
my l susan has a door that swings in. It is a part of the shelf. Can I adapt and use this door? it is much better. Plus, the door that swings in with the shelf, does not close well. Has a huge opening.
How did you snap by fold hinges. I have a problem with that right now. When I purchased it from the store there was no instruction on how to.
My doors do not have any holes in them 4 countersink do you have brackets that will work?
What type of can shield hanges to put corner door
great video
Hi! Great job explaining things. I need to put a lazy susan in a existing counter top corner. So would we just cut out the whole corner of the old doors and frame part? That old corner is so USELESS!! Is one able to jimmy those shelves and the lazy susan parts into the corner?? Or have you ever done that before? Thanks for your help in advance!
Why is there no instructions on adjusting the #Blum hinges in the video or on your website? Like you mention in the video, there are many available adjustments, and it would help to know what does what.
I want to replace many pieces of furniture drawers with the kind that you press on either side and the swivel open. But I don't know what this is called I heard it cold butterfly drawer or semi circle drawer especially things for nightstand where it's not very comfortable pulling out a drawer and also mean you're standing right in front of your nightstand and not in your bed then it's easy to pull out but the reason why I love these drawers is because they have an appeal to me for so many reasons. And all I keep running into all these Corner jobs. I was hoping you could tell me as I'm not a carpenter anything like that any help with that. Because I really wanted to some really beautiful Furniture I picked up that has great bones and a lot of drawers and it would look so beautiful and maple. But just start a completely cheap Ikea wood don't worry about that I just would love if you could point me in the right direction so that I would know what they're called what I need to get on a budget of course to take out the typical pull-out drawer or fashion it into the kind of drawer I'm looking for which is basically doesn't have enough you just put a little pressure on the left give a little push or to the right I would be so appreciative. My dad would know but he died. and if he can offer any more cool interesting things like that thank you so very much.
I have trouble when the hinges are folded up,its very tricky unfoldling them.
Thank you ! It really helped me😄
You're the best.
I have something like one of these but it fell off, and im at a complete loss on how to fix it. There's kinda a female and male end to it, but nothing to solidify the attachment. So I just kinda force it together and shut it, and of course it comes detached every time I open the drawer.
Is there a tutorial for different hinges with the same idea? Because I I have this exact same setup, but I cant seem to find a way to fix it as the hinges are very different from what you show here.
Is there a template for the blum locations?
Hi where did you buy that lazy susan, the inside.
Tnx for demo..
My hinges came loose...... I can't reconnect them to the inside hinge. You just attach the clips to them when they are out of the cabinet. How the heck do you do it when they are hung!
Does this work for inset doors too?
hai!how can install them on the top unit straight one not in the corner and step to calculate them on the 600 cabinet
I have the exact same hinge. One of the adjustment screws on my bi-fold hinge fell off. Do you know if its an easy replacement?
In my experience it's Impossible to find a replacement screw, and the doors won't fit without it! The one I lost was apparently a type of set-screw called a 'Euro Screw'. I bought 2 different hinges and they weren't going to work to reinstall the corner cabinet (after I had removed them to paint them). Then I dusted under my fridge and Presto! there was the screw! Going to try once more to reinstall the folding doors.
HELP!!!! I have a cabinet that has the same door that are at that angle but do not fold. I would like to turn it into bifold doors.
I know it is a 170 degree hinge but I need to know the actual name of that hinge. Thank you.
bifold hinge for lazy susan
thanks so much I luv youtube
If the door is purchased through your company, why wouldn’t every single hole be pre-drilled?
Because it holds it better without it
Purple 911 - that’s not true. I can have a very small hole into which a bigger screw can be attached. Ask IKEA if they have issues with pre-drilling their millions of doors they sell every year.
@@lisao3041 ikea wood isnt real wood
Purple 911 - further evidence it can be pre-drilled.
Sigh....
If you wanted to use different hardware, hinges, etc.....they dont pre-drill. And they probably figure whoever is screwing them in isnt retarded or lazy and can manage that on their own.
no sound on this video
I really like it. Also check out Woodglut and plans.
can't hear what you are saying
The part I really needed to see was blocked by your back and your camera man did not try to help. I think you know what you are doing but I couldn't take away anything unfortunately
Mr mumbles. Poor audio, bad camera angles, not enough description of details.
Mama said If you don't have nothin nice to say don't say it at all