Yes. They are ripping out the entire heating system this summer and putting gas forced air with central air conditioning. If they were going to keep it I would have suggested a sediment trap. The valve I replaced was pretty old so It lasted at least 20 years with out the sediment trap.
I'm an HVAC contractor mostly in facilities maintenance (better pay/bennies) the trend now for a/c companies is that they are hiring (sales techs) not service techs which they show up to your house and walk around your unit and come to the usual conclusion you need a whole new system. Sales techs usually do not know how to fix anything or want to, it's all about the sale/commision and better for the company owner, more profit.
I'm all for business making money I do a little up selling myself. What you are describing and and what this customer experienced was very excessive in the sales and up selling. This customer plans to switch over to forced air before next winter and didn't want to put much money into this older boiler. Thanks for commenting..
The thing that gets me about HVAC work is the local part supply houses won't sell to consumers. I wouldn't even mind paying a markup to them for the ability to get parts that day. However, they force me into shopping online to where I cannot even support a local business. Fine; I'll buy that flame sense rod, that gas valve or the 4 speed motor I've needed to fix my and my relatives HVAC in the last 5 years.
Our furnace died twice this winter (during extreme ND sub zero days) We were able to keep it going thanks to RUclips and Amazon parts. The one thing that hasn't needed replacing yet it the valve. Thanks to you I know what to do if/when that happens. Thanks!
Very nice job on the electronic ignition gas valve. I fix everything myself too, you took it another notch. Cheers man. I do have my emergency contacts. I really enjoy your channel.
I had a licensed plumber install a garbage disposal that FELL OFF a week later as I was doing dishes. A licensed HVAC contractor tried to sell me two $130 blower fans for my AC units. I refused. My neighbor fixed them both with a few squirts of 3 in 1 oil. I had a licensed contractor who tried pour concrete directly over 14 ga. Insulated wire. When it comes to contractors and tradesmen, I trust no one and You Tube everything.
I asked if the fan could be lubricated. The guy said "no, it's sealed". My neighbor had the same unit. We took out the fan(s) removed the fittings, squirted lubricant in there, and put it back together. It lasted about 2 years. Regardless, the guy flat out lied to me.
When changing a gas control, the pressure needs to be set to the specifications of the appliance. Usually for a boiler or furnace the setting is around 3.5” w.c. Most valves come close to that from the factory but I’ve seen them all over the place. The only way to know for sure is to check it with a manometer. Also, although not required, it is good practice to perform a combination test after changing the valve. Not trying to knock you or anything. I know you do good work. I’ve watched your videos, but a job like this should only be done by a licensed HVAC contractor. They have the tools and the knowledge to make sure the job is done properly and safely.
There are crooks every where, in all fields. I have been doing heating, air, & commercial refrigeration for nearly 40 years. If a company says they don't work on your system and it needs replaced THROW THEM OUT (do not pay them)! This is a relatively simple boiler, any tech with any experience should have been able to repair.
I have 2 identical furnaces, one in the attic and the other in the basement. I had a tech replace the gas valve on the attic unit 10 years ago, because the pilot knob got stuck. The new valve he installed is 1.5" shorter than the original. Now the basement furnace gas valve pilot knob is stuck. I purchased the identical gas valve that the tech installed on the attic furnace. I tried to locate the tech who replaced the attic furnace valve but their small company is no longer in business. I called a new tech to replace the valve but he wants me to get a new furnace. I just need a longer section of inlet pipe 0.75" x 6.75", to install the replacement valve. Do they sell the black cast iron pipe in various lengths? I am a retired Electrical Engineer and I have experience replacing my gas hot water heater.
As a handyman in Milwaukee, WI. How do I go about finding an "emergency supply house". The other day a water heater went out and luckily home depot was still open.
The Handyman I call myself a "contractor" on the side but work for a property management company 8-4. I just finished my interview to get into an electrical apprenticeship. Got a 90.5% grade on an interview and a 6 on the aptitude test. So I'm hopefully to get into that. BUT, if you need a hard working apprentice let me know! Lol
In my area, its very hard to purchase replacement parts over the counter if you are not licensed HVAC tech. They say they are protecting their industry.
Brad Turner I've also experienced that in my area when trying to buy parts locally versus online. While expedited delivery usually works.... for same-day emergencies I have a good relationship with an HVAC guy that I've given and sent work to and he's happy to call in a part for me to pick up locally from time to time.
I have an account under my business name with several suppliers around town. I have been in the business in this town as a superintendent, project manager and general contractor. The key is don't call yourself a handyman.
The Handyman these guys were sticklers! I I gave them my general contractor license number and they pulled me up on our Tradesman verification website...."sorry you need a valid HVAC license number to order parts a general contractor's license won't suffice" 😆. Not the end of the world as there's always a workaround. I came across a similar headache trying to order a replacement cast iron drain grate directly from the foundry but was told I couldn't buy from them, I had to buy through one of their authorized wholesale accounts which added $50 to the part cost just for them to create the purchase order.... Great business model if you're on the wholesalers side of it though!
I even got the ol’ “not a licensed contractor” drill when buying a few pieces of replacement siding. Cripes! It’s siding, and I’m not buying bulk. But, would buy the box if required. Pain in the neck.
I've been in the field for 27 years, I tell everyone let your equipment work until it breaks. if you waste money on recommended auto services and gutter inspections then has someone come find something they think is wrong
That valve is known to not open and close 100%. that valve is open 10%. I have found the installer used to much pipe dope on the connector fittings it was blocking the gas flow or plugged the screen on the gas valve also.
The Handyman www.hardwaresales.com/milescraft-1401-crownhangers-for-hanging-crown-molding-black.html?+4th+2013&gclid=EAIaIQobChMIkevtlr3T2QIVw8DICh08IwAbEAQYBSABEgKqAvD_BwE
The Handyman Crown sucks either way, the best thing is to sell them on the corner blocks. No meters involved, plus they think they are making out, while you cut your time installing in half.
It's an Adjustable Slip Nut Wrench also called Adjustable Sink Wrench... they are used a lot by plumbers that work on those big chrome nuts that you see on urinals etc... you can find them on Google/Amazon or Home Depot/Lowes in the plumbing area GREAT VIDEO HANDYMAN!!! Keep up the great work!!!
At 4 minutes 55 seconds, the junction looks like a reverse thread. I am getting stumped on getting off this fitting, which looks like your pipe juncture on steroids.
Here is the valve I used. amzn.to/2oIr1v7 You can use the internet to cross reference your current valve with what the replacement is.
The Handyman wouldn’t that normally have a sediment trap? I thought you mentioned it.
Yes. They are ripping out the entire heating system this summer and putting gas forced air with central air conditioning. If they were going to keep it I would have suggested a sediment trap. The valve I replaced was pretty old so It lasted at least 20 years with out the sediment trap.
The Handyman right, always a balancing act between perfect and being replaced soon. Thanks!
I'm an HVAC contractor mostly in facilities maintenance (better pay/bennies) the trend now for a/c companies is that they are hiring (sales techs) not service techs which they show up to your house and walk around your unit and come to the usual conclusion you need a whole new system. Sales techs usually do not know how to fix anything or want to, it's all about the sale/commision and better for the company owner, more profit.
I'm all for business making money I do a little up selling myself. What you are describing and and what this customer experienced was very excessive in the sales and up selling. This customer plans to switch over to forced air before next winter and didn't want to put much money into this older boiler. Thanks for commenting..
First year hvac apprentice here, thanks for the great video!
The thing that gets me about HVAC work is the local part supply houses won't sell to consumers. I wouldn't even mind paying a markup to them for the ability to get parts that day. However, they force me into shopping online to where I cannot even support a local business. Fine; I'll buy that flame sense rod, that gas valve or the 4 speed motor I've needed to fix my and my relatives HVAC in the last 5 years.
Our furnace died twice this winter (during extreme ND sub zero days) We were able to keep it going thanks to RUclips and Amazon parts. The one thing that hasn't needed replacing yet it the valve. Thanks to you I know what to do if/when that happens. Thanks!
The last 2 minutes of this video are a great wake up call! Thank you for saying it.
Very nice job on the electronic ignition gas valve. I fix everything myself too, you took it another notch. Cheers man. I do have my emergency contacts. I really enjoy your channel.
Being in the hvac trade not all of us try to sell new systems on simple fixes.
I had a licensed plumber install a garbage disposal that FELL OFF a week later as I was doing dishes. A licensed HVAC contractor tried to sell me two $130 blower fans for my AC units. I refused. My neighbor fixed them both with a few squirts of 3 in 1 oil. I had a licensed contractor who tried pour concrete directly over 14 ga. Insulated wire. When it comes to contractors and tradesmen, I trust no one and You Tube everything.
K Uvodich let see how long that motor last my friend. $130 is cheap.
I asked if the fan could be lubricated. The guy said "no, it's sealed". My neighbor had the same unit. We took out the fan(s) removed the fittings, squirted lubricant in there, and put it back together. It lasted about 2 years. Regardless, the guy flat out lied to me.
Great job learn another from listening and watching you 😊
Brother, you make good videos. You may be my favorite RUclips channel.
When changing a gas control, the pressure needs to be set to the specifications of the appliance. Usually for a boiler or furnace the setting is around 3.5” w.c. Most valves come close to that from the factory but I’ve seen them all over the place. The only way to know for sure is to check it with a manometer. Also, although not required, it is good practice to perform a combination test after changing the valve. Not trying to knock you or anything. I know you do good work. I’ve watched your videos, but a job like this should only be done by a licensed HVAC contractor. They have the tools and the knowledge to make sure the job is done properly and safely.
This boiler is 3.5 IWC the valve is also set to 3.5 IWC
Most places the pipe would come down to a T and you would have a dead leg with a cap on it for particles the full into it with T off to the valve
Headlamps are great
There are crooks every where, in all fields.
I have been doing heating, air, & commercial refrigeration for nearly 40 years. If a company says they don't work on your system and it needs replaced THROW THEM OUT (do not pay them)!
This is a relatively simple boiler, any tech with any experience should have been able to repair.
Thank you for this invaluable information.
Thank you for sharing. I'm looking for it.
*so the question is (unless I missed the answer): WHY did the valve fail, or what part of it?*
I have 2 identical furnaces, one in the attic and the other in the basement. I had a tech replace the gas valve on the attic unit 10 years ago, because the pilot knob got stuck. The new valve he installed is 1.5" shorter than the original. Now the basement furnace gas valve pilot knob is stuck. I purchased the identical gas valve that the tech installed on the attic furnace. I tried to locate the tech who replaced the attic furnace valve but their small company is no longer in business. I called a new tech to replace the valve but he wants me to get a new furnace. I just need a longer section of inlet pipe 0.75" x 6.75", to install the replacement valve. Do they sell the black cast iron pipe in various lengths? I am a retired Electrical Engineer and I have experience replacing my gas hot water heater.
great work enjoyed the video.
excellent info thanks
Good man!
As a handyman in Milwaukee, WI. How do I go about finding an "emergency supply house". The other day a water heater went out and luckily home depot was still open.
I used the internet for local plumbing supply and went to their websites I found one that is open 24/7.
The Handyman I call myself a "contractor" on the side but work for a property management company 8-4. I just finished my interview to get into an electrical apprenticeship. Got a 90.5% grade on an interview and a 6 on the aptitude test. So I'm hopefully to get into that. BUT, if you need a hard working apprentice let me know! Lol
Is that for a union job?
The Handyman ya, so unfortunately if I get it I won't be able to do electrical side work.
Why not. Everyone is doing side work.
And as far as not using a handyman, I am great with plumbing, HVAC and electrical, now tile and drywall scare me.
In my area, its very hard to purchase replacement parts over the counter if you are not licensed HVAC tech. They say they are protecting their industry.
Brad Turner I've also experienced that in my area when trying to buy parts locally versus online. While expedited delivery usually works.... for same-day emergencies I have a good relationship with an HVAC guy that I've given and sent work to and he's happy to call in a part for me to pick up locally from time to time.
I have an account under my business name with several suppliers around town. I have been in the business in this town as a superintendent, project manager and general contractor. The key is don't call yourself a handyman.
The Handyman these guys were sticklers! I I gave them my general contractor license number and they pulled me up on our Tradesman verification website...."sorry you need a valid HVAC license number to order parts a general contractor's license won't suffice" 😆. Not the end of the world as there's always a workaround. I came across a similar headache trying to order a replacement cast iron drain grate directly from the foundry but was told I couldn't buy from them, I had to buy through one of their authorized wholesale accounts which added $50 to the part cost just for them to create the purchase order.... Great business model if you're on the wholesalers side of it though!
Fortunately amazon doesn’t give a crap who you are. Same with places like alpine home air online.
I even got the ol’ “not a licensed contractor” drill when buying a few pieces of replacement siding. Cripes! It’s siding, and I’m not buying bulk. But, would buy the box if required. Pain in the neck.
I've been in the field for 27 years, I tell everyone let your equipment work until it breaks. if you waste money on recommended auto services and gutter inspections then has someone come find something they think is wrong
That valve is known to not open and close 100%. that valve is open 10%. I have found the installer used to much pipe dope on the connector fittings it was blocking the gas flow or plugged the screen on the gas valve also.
I found many of that style not shutting down 100%, but I had a $3500. gas detector machine.
I had the same problem on my furnace but the furnace was 30 years old. The valve was $200 and a new furnace was $600 so I got the new furnace.
do you do crown molding?
I have done it. I'm not good at it. I usually make a jig to cut the crown when I do it. Its not easy to do with one person.
The Handyman
www.hardwaresales.com/milescraft-1401-crownhangers-for-hanging-crown-molding-black.html?+4th+2013&gclid=EAIaIQobChMIkevtlr3T2QIVw8DICh08IwAbEAQYBSABEgKqAvD_BwE
thats pretty cool. I have used a extendable pole to hole time up in the past when I have do it. I might need to get some of those hangers.
The Handyman
Crown sucks either way, the best thing is to sell them on the corner blocks. No meters involved, plus they think they are making out, while you cut your time installing in half.
What is that silver Wrench? Is it a gas valve wrench I need one of those never seen one
It's an Adjustable Slip Nut Wrench also called Adjustable Sink Wrench... they are used a lot by plumbers that work on those big chrome nuts that you see on urinals etc... you can find them on Google/Amazon or Home Depot/Lowes in the plumbing area
GREAT VIDEO HANDYMAN!!! Keep up the great work!!!
At 4 minutes 55 seconds, the junction looks like a reverse thread. I am getting stumped on getting off this fitting, which looks like your pipe juncture on steroids.
I'm changing mines now. They want to charge 675 for a 50 part.
That scenario is because some hvac techs get a commision on their work .