Thanks to Wolverine for supplying me with the Bolt M to make this video. If you think the Bolt M would suit your play style, you can purchase one here... shop.wolverineairsoft.com/bolt-m
Agreed. An HPA system is more convenient if you want higher power(3+ Joules) but less hustle while pulling the bolt. It's way too expensive if you add everything up. Spring is king and very low maintenance especially on an SRS due to that quick change system. Personally, I would never convert an SRS... I would use a separate cheaper gun and dedicate it to HPA.
Airsoft Camman I was gutted to see your SRS piss out all its air before we even started. Shame I couldn’t really help you out apart from holding the your SRS while you were pulling your gloves off. Glad you managed to get it sorted and was able to rejoin our team and get some good footage while playing 👍.
i use the wolverine bolt for my vsr 10 and i must say it's kinda blessing since i go airsofting in The Netherlands and belgium but they have different rules on fps and joule so being able to quickly change my fps with just a twist is really nice for me
Believe it or not but part of the reason I actually bought a srs was because my wolverine vsr was a pain in the ass and I did want to go back to a more reliable system. The only advantage (and it’s debatable) of my hpa setup was the joule creep potential, but at a given energy output, it perform just as good as any other well tuned sniper rifle. It is quieter than my srs tho, but my srs doesn’t have an air brake yet
@That Off Brand I don't have a lot of experience with hpa I've been using a spring in my vsr 10 but one day I ran into feeding issue and my friend gave me his vsr which had a co2 wraith and I was surprised all I had to do was put a c02 capsule in the gun to make it work and the wraith wasn't that heavy at all but thx for the advice because I don't know to much stuff about hpa im kinda used to a simple spring
I bought this system but I don't know if it was the right one for my srs 22" a2 could you help me find the necessary up parts because I'm new to the sport I'm Brazilian
Highlighted exactly why i dont use the Bolt-M.The mechanical noise of it. I have the Bolt electromechanical. Put a 7.4 1100 mah in the stock and it has not needed charging once in the 2 years it has been in there. My gun is truly silent from just a few meters away.
Running 3.4J with .45 bbs M170 spring. The easy pull of HPA seems great but the movement limit by the tube links with the cylinder around my body is the con.
I wear a 13ci tank inside my camel back pouch. Personally dont like the Bolt-M as it is noisy, i find the EM to be a far superior unit. Honestly with a 42 inch line you lose nothing, yet i gained perfect shot to shot consistency, the gun is silent with the only moving part being a solenoid and the light bolt pull is even better on the VSR platform.
When you hose came out you could have simply taken the connector back out and your tank wouldn’t have drained that much ^^ :-) Always good to know which steps to take in which order with HPA :-)
Little suggestion since where he put a hole in the gun, I cut that part just the stockpod hole if you have an A2 it is a lot better there and removes the issue of locking the stock. I wish I would've done this at first got the idea today when I was checking where to cut the line to my preference. Please Highlight this for future advice! @Airsoft CamMan
cool vid mate! Ever been playing in Sweden? Would be really baller to see you and mustang with some higher FPS limits, deadly! U'r allowed MAXIMUM 466,7 FPS with .45bbs (40m safety range).
Nice video. Did you grind off the lug on your bolt to get that easy close? I have the Bolt M installed and even before I installed it, the “lock down” movement of my bolt has always felt tight. How is yours almost falling into the locked position so easily? Thanks!!
Really nice! I like in HPA but the Bolt Spring, it's still just as cool. question, how did you hook your handle to the handguard and by what means? If you have a reference, I'm a taker.
Hi bud. What hop rubber/degree do you use and what nub in your SRS please? I am finding it difficult to match the accuracy of my VSR. Using the fast hop, silverback blue 50 rubber with .49's and a PDI 6.05. You always have a nice flat line on your shots. Great vids by the way, big fan.
Hello sir! Love you content! Do you mind me asking: What scope are you running? Looks like a tactical scope. Relatively unorthodox for a sniper I think. What is your reasoning? Weight? Don’t need a lot of maginfication? Weight is also my main concern with a scope that has (for example) a 2.5-10x56 magnification. Although I like the look of those on an SRS Any feedback/advice?
Would your opinion change about using the HPA rig if you were able to figure out where to place a CO2 wraith on it? Then there’s at least no tank to carry and with a sniping position, you won’t be burning through the cartridges that quickly....
I did this on my VSR 10 with a Wolverine bolt and I modded the inside of the stock to hold a 33g cO2 cartridge and regulator. I get about 350-500 shots per cartridge depending on weather and how I’m using it and I couldn’t be happier with the setup. All the benefits of HPA (consistency, range, sound, etc) but without the need to carry an external tank and deal with the hoses and all that stuff.
@@airsoftcamman Been in the role a long time , I actually predated KM's 3d leafy ... just less crafting on them back then ... But camera set ups, this is something i always did very amateurishly, never quite had good "action cams" ... and it's actually something you pro content makers skip on talking about. Would be nice to have some indepth, does and don'ts , accessories/battery needs/placements.
our field allowed up to 450 fps or = to that in joules but i keep my srs beflow 400 in joules "around 380" so i can have no minimal engagement you loose maybe 10 feet which is not much of a difference but being able to shoot someone close instead of trying to grab a pistol makes a real difference
hi camman, how do you get such straight lines of the BB? if i want to shoot further, it always goes with a lot of hop, so going up as a mountain, but yours are going straight as a line, how do you do that? so fine
Hey man! I built in a Bolt M myself just now. I saw it in your video and fell in love. But man that thing is loud. I have only tested it with an empty mag but my mancraft kit is way more quiet. Is that normal? Will the noise go down with a bb in the bucking?
Hail brother, I'm from Brazil I wanted to know the Joule and fps allowed in your country! here in brazil they run at 550 fps on .20 and the limit is 2.7 J on the game ball example .48
there are line sleeves and/or you can weave paracord for added protection on their lines. The lines themselves are fairly durable but youre kinda screwed if it gets cut in-game
it was a shame to see your line break straight away, least lines are one of the easiest things to fix on hpa set ups, shame it has a load bolt, hope you find away of sorting it out
Thanks to Wolverine for supplying me with the Bolt M to make this video. If you think the Bolt M would suit your play style, you can purchase one here... shop.wolverineairsoft.com/bolt-m
That bolt m can fit to srs hti?
Man, that bb arch from the first clip is incredible. Such a straight trajectory.
Agreed. An HPA system is more convenient if you want higher power(3+ Joules) but less hustle while pulling the bolt. It's way too expensive if you add everything up. Spring is king and very low maintenance especially on an SRS due to that quick change system. Personally, I would never convert an SRS... I would use a separate cheaper gun and dedicate it to HPA.
Glad you done this video its made my mind up now and I'm sticking with my wasp piston and rapax spring as results are flawless
Airsoft Camman I was gutted to see your SRS piss out all its air before we even started. Shame I couldn’t really help you out apart from holding the your SRS while you were pulling your gloves off.
Glad you managed to get it sorted and was able to rejoin our team and get some good footage while playing 👍.
Wise decision my friend and ty for your review like always a HONEST review
i use the wolverine bolt for my vsr 10 and i must say it's kinda blessing since i go airsofting in The Netherlands and belgium but they have different rules on fps and joule so being able to quickly change my fps with just a twist is really nice for me
I've just started using srs 16' too. Just m160, fast hop up unit and I don't need to change anything more to have fun💪
still in love with your style of those videos
Believe it or not but part of the reason I actually bought a srs was because my wolverine vsr was a pain in the ass and I did want to go back to a more reliable system. The only advantage (and it’s debatable) of my hpa setup was the joule creep potential, but at a given energy output, it perform just as good as any other well tuned sniper rifle. It is quieter than my srs tho, but my srs doesn’t have an air brake yet
Thanks CamMan, now I want an SRS for that dead straight trajectory
you can use a v small cable tie to keep the release black or coloured valve to stay fully out i use these on my 3 d printer with the same attachment
You can get a little c-clip to fit behind the release ring. This stops you compressing it and releasing the hose. Hope this helps
if you don't like a heavy air tank get a wolverine wraith it puts a decent amount of psi and it is smaller and much lighter then a full airtank
@That Off Brand I don't have a lot of experience with hpa I've been using a spring in my vsr 10 but one day I ran into feeding issue and my friend gave me his vsr which had a co2 wraith and I was surprised all I had to do was put a c02 capsule in the gun to make it work and the wraith wasn't that heavy at all but thx for the advice because I don't know to much stuff about hpa im kinda used to a simple spring
Some nice shots! I like the explanation on the HPA something I’ve never tried
Wolverine Airsoft "BOLT M" HPA Conversion Kit for TM VSR-10 System Airsoft Sniper Rifles (Model: Tokyo Marui VSR-10
I bought this system but I don't know if it was the right one for my srs 22" a2 could you help me find the necessary up parts because I'm new to the sport I'm Brazilian
Highlighted exactly why i dont use the Bolt-M.The mechanical noise of it. I have the Bolt electromechanical. Put a 7.4 1100 mah in the stock and it has not needed charging once in the 2 years it has been in there. My gun is truly silent from just a few meters away.
heard you say you've been using the MTW, i absolutely love mine, best airsoft purchase ive ever made. wolverine is amazing.
Best investment ive made in airsoft
Great and insightfull breakdown of the product. Well done!
Running 3.4J with .45 bbs M170 spring.
The easy pull of HPA seems great but the movement limit by the tube links with the cylinder around my body is the con.
I wear a 13ci tank inside my camel back pouch. Personally dont like the Bolt-M as it is noisy, i find the EM to be a far superior unit.
Honestly with a 42 inch line you lose nothing, yet i gained perfect shot to shot consistency, the gun is silent with the only moving part being a solenoid and the light bolt pull is even better on the VSR platform.
@@tothethreshold.9965 what is the EM lol
Cool video! Love watching them.
So glad you made this video I was thinking of converting mine but now I'm not.
If you put a small o-ring between the black button where the hose goes in and your hpa fitting you cannot push it anymore until you remove the o-ring.
When you hose came out you could have simply taken the connector back out and your tank wouldn’t have drained that much ^^ :-) Always good to know which steps to take in which order with HPA :-)
Little suggestion since where he put a hole in the gun, I cut that part just the stockpod hole if you have an A2 it is a lot better there and removes the issue of locking the stock. I wish I would've done this at first got the idea today when I was checking where to cut the line to my preference.
Please Highlight this for future advice! @Airsoft CamMan
Nice vid. Agree that spring is better then hpa on the Silver B
Great review CM
Aloha, great video! Love the info.
🇺🇸🇬🇧😎🤙
You can get clips that stop you pushing the black end in to release the pipe
Spot on video that fella.
Was wondering about adding this to mine myself but I'm gonna pass now.
Thank you for the video and the info.
@4:11...that shot was fucking amazing!!!🍻
But muy question is... which one shots better?
very top video, very good image quality, congratulations following aki from Brazil, I also have a sniper channel !!
cool vid mate! Ever been playing in Sweden? Would be really baller to see you and mustang with some higher FPS limits, deadly! U'r allowed MAXIMUM 466,7 FPS with .45bbs (40m safety range).
Currently, most fields in Japan are not able to use airtanks…
I miss 30 years ago...
Very nice, honest video. What hop-up , bucking are you using these days? Which is the winning combo for you? :)
I love the bolt/hpa but it's still so hard to snipe with any bolt action rifle. I do get a certain extreme satisfaction when I get that osok...
Big fan of ur vid's bro! what internal upgrades u used here? barrel, etc.. very curious!
Nice video. Did you grind off the lug on your bolt to get that easy close? I have the Bolt M installed and even before I installed it, the “lock down” movement of my bolt has always felt tight. How is yours almost falling into the locked position so easily? Thanks!!
I have a bolt m in my vsr10 and the recommended max pressure is 180psi. At 150psi with .45g bbs I get 4.51j 😲
You sure? Wolverines page says 140psi.... wolverineairsoft.com/bolt-m/
Nice review and wise words. Spring powered in the UK is more than enough and no need for the extra faff.
Super clean huge fan would love to play 1 day with u in the future we’re are u located
Based it East Anglia, but play all over. 👍
Really nice! I like in HPA but the Bolt Spring, it's still just as cool. question, how did you hook your handle to the handguard and by what means? If you have a reference, I'm a taker.
Epic video dude , 😁
Hi bud. What hop rubber/degree do you use and what nub in your SRS please? I am finding it difficult to match the accuracy of my VSR. Using the fast hop, silverback blue 50 rubber with .49's and a PDI 6.05. You always have a nice flat line on your shots. Great vids by the way, big fan.
You know for how long the warranty is for the bolt m system?
Mancraft give a lifetime warranty..
Thanks bro 🙏🏼
great vid 👍
Were those socom tactical team indicators?!
Hello sir! Love you content! Do you mind me asking:
What scope are you running? Looks like a tactical scope. Relatively unorthodox for a sniper I think. What is your reasoning? Weight? Don’t need a lot of maginfication?
Weight is also my main concern with a scope that has (for example) a 2.5-10x56 magnification. Although I like the look of those on an SRS
Any feedback/advice?
3.3 joules seems extremely high for field play.
Would your opinion change about using the HPA rig if you were able to figure out where to place a CO2 wraith on it? Then there’s at least no tank to carry and with a sniping position, you won’t be burning through the cartridges that quickly....
I did this on my VSR 10 with a Wolverine bolt and I modded the inside of the stock to hold a 33g cO2 cartridge and regulator. I get about 350-500 shots per cartridge depending on weather and how I’m using it and I couldn’t be happier with the setup. All the benefits of HPA (consistency, range, sound, etc) but without the need to carry an external tank and deal with the hoses and all that stuff.
What tank size were you using here? Could it last two whole days of play?
May have to carry a tank but it's a hpa'ed SRS!
Hey CamMan, more interested in your camera set up on the rifle ... any chance of doing a explanation/howto for a good set up?
I have no gameplay coming up for sometime, so I was thinking about an Airsoft camera video. 👍
@@airsoftcamman Been in the role a long time , I actually predated KM's 3d leafy ... just less crafting on them back then ...
But camera set ups, this is something i always did very amateurishly, never quite had good "action cams" ... and it's actually something you pro content makers skip on talking about.
Would be nice to have some indepth, does and don'ts , accessories/battery needs/placements.
Why does yours function so well mine just pisses out the air between the metal thingy and the black bolt wtf ? maybe can someone help :(
cool
an honest opinion :) exactly what i came for
cheers
our field allowed up to 450 fps or = to that in joules but i keep my srs beflow 400 in joules "around 380" so i can have no minimal engagement you loose maybe 10 feet which is not much of a difference but being able to shoot someone close instead of trying to grab a pistol makes a real difference
hi camman, how do you get such straight lines of the BB? if i want to shoot further, it always goes with a lot of hop, so going up as a mountain, but yours are going straight as a line, how do you do that? so fine
Was considering converting my VSR to Hpa but after watching numerous videos where the bbs flight is all over the place I’m not sure I’ll bother now
That might be more barrel, nub problem than the engine itself
Thanks for the Handy information! Literally answered all my questions in one go! I have a VFC M40A5 Gas anyway to HPA it you think?
Tapping the mags would be the best I can think of
Hey man! I built in a Bolt M myself just now. I saw it in your video and fell in love. But man that thing is loud. I have only tested it with an empty mag but my mancraft kit is way more quiet. Is that normal? Will the noise go down with a bb in the bucking?
Hey 👋 can you tell me for how long the warranty is for this system??
Mancraft give a lifetime warranty..
Thanks
@@gold3n628 sorry can’t tell. Mine worked flawless
I have this weird full bore bolt in mine. Very difficult to fit a BB into. Advice?
Hail brother, I'm from Brazil I wanted to know the Joule and fps allowed in your country!
here in brazil they run at 550 fps on .20
and the limit is 2.7 J on the game ball example .48
wont that make it over the limit being 400 on .45s? and also 3.3joules??
I was about to comment the same thing...
@@valentinozoboli4592 It's fully adjustable fps by adjusting air pressure. So you can set it for your fields requirements.
I think this videos must cam out 🤔 .
Are the hoses super durable? what happens if it gets nicked or cut during gameplay?
there are line sleeves and/or you can weave paracord for added protection on their lines. The lines themselves are fairly durable but youre kinda screwed if it gets cut in-game
Running 3 Joules with .45 where i live. Would help with a thingy like this or similar.
Man, SRS is one of the most accurate spring sniper, I don't get why HPA it lol
Try the bolt pull at 550fps lol. Coming from someone who can do a dozen pull-ups easily it’s not at all practical
Bb's super straight
Is it possible to convert this to semi auto?
How do jou get it so quiet???
Can I do the same for the ssg96?
O.o stranger things, Im use a KJW m700 with HPA, amped regulator, with 110 psi I got 548~550 FPS with very efficient air consumption
hi! which regulator you use? thx
Co2 or Air
What psi and J were you running?
How much mate
Top de mais
Mantap
Keren abissss
Hello CamMan
? which cam do you use as scope cam on this video ? please
GitupF1
@@danvaleanu8556 ??
oh ... I ve just seen : its a cam ! ok thank you ;-)
What is the best airsoft sniper?
Best Quality: SRS, Best Value: Novritsch SSG10,
Would I? Yes. Will I? No
where do you get your tank filled?
Ask your local fire department or dive shop.
What regulator do you use in your setup?
A Balystik V2
@@airsoftcamman can it handle 40psi for cqb guns?
@@SleepyDioma Sure it does.
You sound like kicking mustang are you kicking mustang?
The thin white line there are two different people but from the same country buddy
I think they're just from similar parts of the UK, Essex-ish kinda accent I think.
@@valentinozoboli4592 Maybe Kicking Mustang sounds like me. Is Kicking Mustang me?
@@airsoftcamman This is how conspiracy theories start...
Just asking,
Can you convert that into aeg?
Excuse me wut
it was a shame to see your line break straight away, least lines are one of the easiest things to fix on hpa set ups, shame it has a load bolt, hope you find away of sorting it out
No
3,7 j wtf
Why? Why do you hate yourself!
3.32 joULES....OUCH
In Soviet Russia bush fires back
"Heavy"
Wtf