Love the "Adventurer 5M" rundown, mate!👍 Just upgraded to the Flashforge AD5M Pro myself. The auto bed leveling is a godsend and swapping nozzles has never been easier!😎 Plus, the air quality stays top-notch!🙌 Welcome to the Flashforge family!🚀
Just to help a friend, the screaching sound, i had it too, but by researching, i found that if u use the included lube, on the belts near the bearings, and move the extuder head all around, you will corect that noise that’s caused because of the firction.
Can you tell me what should I do if my printer freezes when i click on the 3d model using a usb drive and I can't also find it using "automatic scan" using flashprint
i have the same printer and im struggling getting it perfectly dialed in, stringing seems to be a big issue. using retraction at 0.8mm, z hop at 0.4mm set to spiral mode.
That is strange, I am not having those issues. It is difficult to diagnose the problem without being there since the cause can be due to many reasons. What program are you using to slice the drawing? Is your filament compatible with the print speed? When loading the filament, was the correct polymer chosen? What filament type are you using? Does your print need support or are you orienting it correctly?
Love the "Adventurer 5M" rundown, mate!👍 Just upgraded to the Flashforge AD5M Pro myself. The auto bed leveling is a godsend and swapping nozzles has never been easier!😎 Plus, the air quality stays top-notch!🙌 Welcome to the Flashforge family!🚀
Glad you enjoyed the video. I agree, I am very happy with the Adventurer 5M so far.
Thank you! This simplified the process so much.
Glad it helped. Thank you for the feedback.
Just to help a friend, the screaching sound, i had it too, but by researching, i found that if u use the included lube, on the belts near the bearings, and move the extuder head all around, you will corect that noise that’s caused because of the firction.
Thank you for the feedback but I would not put the lubricant on the belts as this could lead to slipping and belt degradation.
Thank you. This really helped me.
You are welcome. I am glad it helped.
Can you tell me what should I do if my printer freezes when i click on the 3d model using a usb drive and I can't also find it using "automatic scan" using flashprint
I have not had that issue. Is the printer firmware up to date?
@JoeAlisando I would have to check that out
i have the same printer and im struggling getting it perfectly dialed in, stringing seems to be a big issue. using retraction at 0.8mm, z hop at 0.4mm set to spiral mode.
That is strange, I am not having those issues. It is difficult to diagnose the problem without being there since the cause can be due to many reasons. What program are you using to slice the drawing? Is your filament compatible with the print speed? When loading the filament, was the correct polymer chosen? What filament type are you using? Does your print need support or are you orienting it correctly?