👍👍👍👍 Nice job on building the tank. The filler neck is supposed to have a short tube tack Welded inside from just inside the cap to a few inches inside the tank. 99% are missing. It vents air when refueling. Without it will work, but you have to feed it very slow or it will Trip the automatic nozzles. You didn't mention and I tried to look, but the wheel Cyl. are two step bores. Larger bore, To the rear and smaller bore to the front. (Big Bore Back) Brake spring pliers go a long way on those springs. Originally the winch used 150'- 7/16" cable which is pricey. (not as common) I run 1/2"x 130' which is cheaper and stronger. Beautiful Job your doing so far! 💪💪 Tom
👍👍👍👍
Nice job on building the tank. The filler neck is supposed to have a short tube tack
Welded inside from just inside the cap to a few inches inside the tank. 99% are missing.
It vents air when refueling. Without it will work, but you have to feed it very slow or it will Trip the automatic nozzles.
You didn't mention and I tried to look, but the wheel Cyl. are two step bores. Larger bore, To the rear and smaller bore to the front. (Big Bore Back)
Brake spring pliers go a long way on those springs.
Originally the winch used 150'- 7/16" cable which is pricey. (not as common)
I run 1/2"x 130' which is cheaper and stronger.
Beautiful Job your doing so far! 💪💪
Tom
@@thomaspetroff9117 thanks for the info. Very much appreciated.