You guy on the West coast car is so clean. No rust at all compare to the Northeast where I spend most of my time on taking rusted bolts out and replacing rusted body panels. I need to find a West coast car and get back to the Boston area for my next race car project.
This video was so helpful i was concerned i would have to do some welding because i come from a german car back ground but looks like i dont! Doing my first honda project this helped a lot!
Waddup Worx, is the power steering subframe different from the manual subframe? If so what did you do to get the rack on there straight and solid? If not did you just use the oem eg manual rack brackets and bushings? Thanks! P.S. You are helping a ton with the little things that most people don't talk about! Awesome videos!
So the motor mounts will be ek mounts and eg mount for rear? Sorry i guess what im saying is will you be using ek k series mounts and eg rear k swap mount?
I'm planning to go k in a ej6 and want to use the ekk2 mounts. So my question is if I use an integra subframe, power steering rack, and lower control arms do I need to use the integra sway bar as well to complete the swap?
Pulled one today and I didn't get the steering column knuckle off of it 😩 Lcas were spoken for and the power rack was shot, I did get all the hardware tho.
You have to use everything off the eg subframe including lower controls. I’ll be using the 32mm axles with innovative mounts. The mounts are the reason lots of guys are breaking axles. I’ve used yonaka axles in the past and they work great up to 280hp
i ended up getting a gsr subframe but i guess i have to mod the rack and pinion so do you have any info or could possibly point me in the right direction
I just bought an eg subframe only and the guy found the bolts and he found six; 2 short ones, 2 medium ones and 2 long ones. Is that the right count of bolts for the subframe?
if i want to use power steering using OEM 96-00 power steering rack with eg subframe does it fit... please reply.. and ek lower cantrol arm works with eg subfram
Ran into this video thankfully because I was having issues with my steering knuckle. my only question is after ordering the knuckle I noticed that one side does not fit on neither the steering rack or the steering column. is there any adjustments I should do towards the knuckle to make it fit?
You guy on the West coast car is so clean. No rust at all compare to the Northeast where I spend most of my time on taking rusted bolts out and replacing rusted body panels. I need to find a West coast car and get back to the Boston area for my next race car project.
Thank you for your K swap Ek videos 👌 I'm currently doing a K swap and I'm always watching your videos, they're so much help
This video was so helpful i was concerned i would have to do some welding because i come from a german car back ground but looks like i dont! Doing my first honda project this helped a lot!
Huge tip on the eg steering knuckle needed ...noone really knows that
Yes most guys won’t know that till you run into the problem
@Bl St any eg/dc
Can I use an EG subframe from any model for my EK hatch?? 2Dr, 4Dr or hatch???
Thanks homie. Saving me time headaches. I appreciate you 🙏🏼
Rewatching to make sure I have everything
Dam it forgot to get the eg/da steering knuckle
Best video I'm planning on doing a k20z3 swap in my 96 ek
What about the forks for the suspension do you need the eg too? Or will it work with the ek?
Great information buddy 👍
Thanks.
Did you use the stabilizer bar??
Did you have to use the eg front sway bar or were you able to keep the ek front bar?
Did You Use The Dust Cover Boot From The EK Or The EG, Thanks For The Videos
Hey what upper n lower control arms did you use with the eg subframe??
Waddup Worx, is the power steering subframe different from the manual subframe? If so what did you do to get the rack on there straight and solid? If not did you just use the oem eg manual rack brackets and bushings? Thanks!
P.S. You are helping a ton with the little things that most people don't talk about! Awesome videos!
There are a few differences if you’re not going with ps get a manual rack will mount right up
@@oemworx4147 Sweet! Thanks for the help!
Please bro help me out, when I put it all together the swivel part gets stuck and doesn’t allow me to turn
Nice
what lower control arms you use bro ? and what else did you use for the rest of the suspension parts ?
So the motor mounts will be ek mounts and eg mount for rear? Sorry i guess what im saying is will you be using ek k series mounts and eg rear k swap mount?
I'm planning to go k in a ej6 and want to use the ekk2 mounts. So my question is if I use an integra subframe, power steering rack, and lower control arms do I need to use the integra sway bar as well to complete the swap?
Great stuff
If you use a eg manual rack does the eg steering knuckle have to be a manual knuckle ? or can a eg power steering knuckle work the same?
Any eg knuckle works
what wheel hub did you use? and what lower shock fork did you use?
Pulled one today and I didn't get the steering column knuckle off of it 😩
Lcas were spoken for and the power rack was shot,
I did get all the hardware tho.
For the eg steering column joint does it matter if the joint came from a eg with ps or a eg with manual steering
No all eg steering knuckles are the same just make sure it’s 92-95 civic.
Bro do you us the eg Lca or does the ek fits fine?? And are you changing the 32mm hub to a 36mm? They say the 32mm axle brakes easy?
You have to use everything off the eg subframe including lower controls. I’ll be using the 32mm axles with innovative mounts. The mounts are the reason lots of guys are breaking axles. I’ve used yonaka axles in the past and they work great up to 280hp
Oem Worx thanks for the reply bro
Hi does the ek control arms and away bar work on the eg subframe ?
You can use ek lower control arms but you must use eg/dc compliance bushings. As for the sway bar, I am not positive. -@dapem1
You cannot use the ek lower controls and sway bar you have to use eg control arms and sway bar
We can use the strut fork from Ek into the EG lower control arms?
Do the eg compliance arms need the eg compliance arm bushing ???
If I buy an eg subframe with power steering rack Will a manual rack fit after ?
Im obviously am doing a k swap, can assemble the kmotor with the subframe before the install? Is it easier than doing it from the top?
do you need to use the eg strut forks too? or will the ek ones work?
i ended up getting a gsr subframe but i guess i have to mod the rack and pinion so do you have any info or could possibly point me in the right direction
I just bought an eg subframe only and the guy found the bolts and he found six; 2 short ones, 2 medium ones and 2 long ones. Is that the right count of bolts for the subframe?
Yes
@@oemworx4147 can I reuse the ek manual rack mounting bolts and bracket? What about the ek bolts for lower control arm brackets to subframe?
I thought you could just weld stuff onto it and make everything work. I was wrong.
Can you modify the EK subframe to accept the EKK2 mount instead of replacing it?
Bro can I use subframe acura integra 98 in my civic ek if I need to use knuckle too.?
Yes you can do integra subframe and integra knuckle
Did you have to swap out the rotors/brakes to Eg as well? Or everything was still ek except the subframe,rack, and control arms?
Did u ever figure dis out
@@Juggin2hard I honestly just went all eg
@@KingCamboVon what exactly do I need from eg like what from the subframe do I need appreciate the response
So...subframe and hardware, lower control arms and steering knuckle? Or literally everything on the eg frame?
if i want to use power steering using OEM 96-00 power steering rack with eg subframe does it fit... please reply.. and ek lower cantrol arm works with eg subfram
No you need all eg parts
Would that subframe work for a b series with a si t bracket ?
I didn't know u need eg steering knuckle damm I have to go find one
Yes you do bro should be easy find at junkyard or maybe eBay should find one cheap.
Great Video , on the bolts and knuckles ! Keep the good work bro. insta@Boltsandnutsracing
Ran into this video thankfully because I was having issues with my steering knuckle. my only question is after ordering the knuckle I noticed that one side does not fit on neither the steering rack or the steering column. is there any adjustments I should do towards the knuckle to make it fit?
What tie rods do u us e
I have 99 ex coupe can i use my stock subframe to go k swap?
No has to be eg or dc subframe
What year, do you know?
@@ULISESBRAN eg is 1992-1995 civic coupe and sedan.
Would that work for the ek hatch?
Look up Gene Kim
What subframe do I need for my em1
92-95 civic subframe
Ok I really appreciate it
@@oemworx4147 can it be out of a sedan or does it have to be a coupe or hatch?
@@bseries8826 all.
Do I need the rack and pinion or can I just use the ek rack and pinion on the eg subframe ?
You need the eg or dc2 steering rack. The ek won't fit on the eg subframe