Finally got off using a dremel cut off disc to grind 3 equally spaced notches on interior of outer case of bearing and lightly hammering each one at a time. Seemed to work better than harder hammering. Guess harder strokes was binding it sideways. I saw later where they make a blind bearing puller for this purpose. I had never heard of one. Had to replace the other two larger bearings also and add a sleeve kit where the big seal goes because of wear from previous owners neglect. I have a couple of questions about the hydraulics of this tractor YM2220D Do you have a video or could help with that by chance? Appreciate it
Thanks for the video. I am doing mine now. As for as I know you are the only one with a video of this style of Yanmar hub on the web. Mine also is the same bearing that you replaced however my bearing fell apart and the outer band of it is stuck in the housing which is flush with the place on housing where the small seal goes. So nowhere to get behind it and drive it out. I have tried a chisel and punch without any luck because I am hitting it sideways on the curve or track where the ball bearings once were. Any ideal how this could be removed would be appreciated. I’ve thought about welding an upside down Y to the bearing casing to have something to hammer on but am a little reluctant to.
Finally got off using a dremel cut off disc to grind 3 equally spaced notches on interior of outer case of bearing and lightly hammering each one at a time. Seemed to work better than harder hammering. Guess harder strokes was binding it sideways. I saw later where they make a blind bearing puller for this purpose. I had never heard of one. Had to replace the other two larger bearings also and add a sleeve kit where the big seal goes because of wear from previous owners neglect. I have a couple of questions about the hydraulics of this tractor YM2220D Do you have a video or could help with that by chance? Appreciate it
Thanks for the video. I am doing mine now. As for as I know you are the only one with a video of this style of Yanmar hub on the web. Mine also is the same bearing that you replaced however my bearing fell apart and the outer band of it is stuck in the housing which is flush with the place on housing where the small seal goes. So nowhere to get behind it and drive it out. I have tried a chisel and punch without any luck because I am hitting it sideways on the curve or track where the ball bearings once were. Any ideal how this could be removed would be appreciated. I’ve thought about welding an upside down Y to the bearing casing to have something to hammer on but am a little reluctant to.
If you tried a chisel,the only way to remove is welding
Where I can buy these bering?
Where are you located? I have a 1500 d left front hub is grinding. I'm at a standstill don't know what to do I'm not a mechanic.
ruclips.net/video/a6cN5LPmUEA/видео.html
Just watch this one of my video
@@tractorsmarinemechanic thanks but that's beyond my skills or tools and mine is a 4x4 1500d
ruclips.net/video/KChbrB9dsI8/видео.html
The same with this
Weren’t Expecting that to fall were you
👍