Regulator Maintenance

Поделиться
HTML-код
  • Опубликовано: 31 дек 2024

Комментарии •

  • @Mrich775
    @Mrich775 6 лет назад +2

    Fantastic video as always, cannot wait to see what comes next!

  • @abettermousetrap
    @abettermousetrap 2 года назад

    Very informative and well done. Thank you. I've now subscribed and will be checking out your other stuff

  • @CraftingDepths
    @CraftingDepths 6 лет назад +8

    great vid! just to be the smart ass: when your dustcap is tight, water can't actually go into the first stage as a result of purging the second stage while washing. It's like pushing a drinking straw (hose) into a glass of water while putting a finger (dust cap) on top.

    • @looloolama
      @looloolama 4 месяца назад

      Pressure inside your reg is 1 atmosphere when you put the dust cap on. Purge your reg (opening the valve) and water will get in if the pressure outside 2nd stage is higher than 1 bar, e.g. hose, in a tub etc

    • @CraftingDepths
      @CraftingDepths 4 месяца назад

      @@looloolama you need a very deep tub to push the water inside.

  • @twix92biaatch
    @twix92biaatch 6 лет назад +4

    great video, keep up the great work .
    But i hope you sort out the audio on your next videos

  • @p-dog2837
    @p-dog2837 6 лет назад +1

    I think you should store the first Stage without a cap, so it can dry open at the air. if you screw a cab on it the water can't dry out of the first stage in the case of water contact before you close the stage. isn't it better without screwing a cap on it? to check the O-ring I can use hey eyes...

  • @africantwin173
    @africantwin173 3 года назад

    Bitte, Please make more vids on maintenance & servicing.

  • @nayaleezy
    @nayaleezy 2 года назад

    thank you 👌

  • @LarsSveen
    @LarsSveen 6 лет назад +3

    Great thoughts on maintenance. What do you think about using those little pony bottle gauges instead of those full size ones with that setup? Seems like avoiding the 6" hose and screwing directly into the 1st stage is one less potential failure point. I understand people might have a problem reading them, but I have good close vision and it doesn't bother me at all. In fact I was using one as my primary SPG (recreational rig) for quite a while (on a 36" miflex hose going to my wrist). PS: sound quality is awful. Get a lav mic, or use a shotgun mic, røde, hang something from the ceiling, etc.

    • @CoastalDevelopment
      @CoastalDevelopment  6 лет назад +1

      HI Lars, the gauges you mention have a great tendency to "spit out" their glass when preasurized. I have some pretty bad expiriences with them.

  • @MrJamesmbernard
    @MrJamesmbernard 5 лет назад +1

    You mentioned a link to the RUclips video about using cave line instead of a zip tie to secure a mouthpiece, but I don’t see it in the show notes.
    Do you mind sharing the link again?

    • @bjerkefranchi2880
      @bjerkefranchi2880 4 года назад +1

      MrJamesmbernard The video is called “tackling”

  • @jeffzambran9654
    @jeffzambran9654 3 года назад

    your wrong, The second stage rig, has a poppet valve that prevents water from backing into the air supple line that comes from the first stage. so yes, you can wash the 2nd stage in water without any problem of water getting the first stage. from the 2nd stage.

    • @CoastalDevelopment
      @CoastalDevelopment  3 года назад +1

      Thanks. By far not all of them - so better safe then sorry - especially on "generalized recommendations" :-)

  • @paulschwarzer6203
    @paulschwarzer6203 6 лет назад +8

    The audio is just coming from the left side.

    • @ChrisEpler
      @ChrisEpler 5 лет назад +1

      The Mic is on his left side, so, ya, makes sense... :-P

    • @shakuiel9669
      @shakuiel9669 3 года назад

      @@ChrisEpler No it doesn't he's talking into it from the right

  • @8hx64
    @8hx64 6 месяцев назад

    So you're trying to advance your own P.A.D.I. thing? Nice!

  • @Formatbeatz
    @Formatbeatz Год назад

    Verbindung über den Mars steht.

  • @bmzaron713
    @bmzaron713 4 года назад

    dude I know you have the potential to make a better video with improved overhead camera and more scripted notes

  • @user-yp6qp2kf2z
    @user-yp6qp2kf2z 6 лет назад +2

    Ich verstehe einfach nicht warum man eine deutsche Beschreibung und einen deutschen Titel nutzt und dann englisch spricht.

    • @Duglum666
      @Duglum666 5 лет назад +3

      Titel und Beschreibung sind auf englisch. Die Übersetzung ist automatisch und ein "Feature" von RUclips seit einiger Zeit... die einzige mir bekannte Möglichkeit das abzuschalten ist youtube komplett auf englisch zu stellen.

  • @isparoz
    @isparoz 4 года назад +2

    unnecessary intro...