YES You an make videos on Topics like Busbar differential, Ref./SEF differential, and other protections (ANSI) which Numerical relays are capable of operating like 50, 50N, 51, 51N, 87L/87B, 64R etc.
Yes. I admit that. Gaurav sir deserve for all the credits due to his hardwork and the way of his wonderful presentation. Explanation is so much simple. Thanks Gaurav sir.
Please correct the explanation, 3 min it won't close automatically. No breaker will close on auto after 3 min of fault. Reclose for the first time,then it will remain in open if fault persisting. Especially auto reclosing available in only one phase fault condition. Consider in 3 phase line, one line not available for min, then entire power system will be collapsed in negative phase seq. So whatever the duty cycle mentioned, it is the breaker duty and not related to fault clearing time.
Dear Sir, plz make a video regarding how the ac and dc connections are given in control and relay panel as a redundant electrical sources to make system uninterrupted. Also plz tell about where is ac and dc supplies required in control and relay panel for 33kv, 132kv, 220kv and above system.
Mr Gaurav in my worksite substation for traction power we have SF6 CBs , 3pcs for Incomer 1 and the other 3 for iIncomer2. The center CB is connected by signal and electrical cables with the outer CBs. In case of Transient fault all 3 CBs operate simultaneously. Transparently these CBs are not MGO. So my question is, are these CBs EGO? If Yes Why?
Sir in past 3 months, in our area we had floating neutral fault twice. It has damage many of devices and adapters for all homes in our area. I checked and mostly voltage was around 350v-400v during fault. What device for home do you recommended to prevent this, something that turns off supply in home in such condition. I found device amiciSmart Over/Under Voltage device, but what I found is device is themself rated for only upto 300v max. Device will probably burn or may work for few minutes over 300v or behaviour will be unknown. Can you suggest what type of device is suitable for home use?
I wanted to know is there any video about "how electricity is provided while it's raining and why we don't hear about any accident caused by electricity while its raining?"
Crystal clear explanation Sir,
Awesome 👍🏽.
Thanks.for the feedback 😊
You have done an excellent job in responding to the request in a timely manner.thank you sir 🙏
It was a crystal clear animated explanation...Thank you!
Thanks for the feedback 😊
YES
You an make videos on Topics like Busbar differential, Ref./SEF differential, and other protections (ANSI) which Numerical relays are capable of operating like 50, 50N, 51, 51N, 87L/87B, 64R etc.
Sir nice video it got clear idea about the topic. Thank you sir
Excellent brother, finaly a channel where explained very well in simple way..
Glad it helped
شكرا علي شرحك الرائع❤❤😊
great video. Could you possibly do a video on on load tap changing of a power transformer?
Very good lecture Sir. Thanks 👍
Exams on CSC, VSC and HVDC is coming up in a few weeks 😢
I know you talking about them will help me solve the questions.
Sir, Kindly explain ACB different Trip settings calculation and curve details...
Great example to understand the sequence mechanism, I just wonder that does it only need one time of spring recharge to perform the whole sequence ?
Please make the vedio on all DS/ES and GCB interlocking
Sir tell please how the relay senses overvoltage , overcurrent and which device is used please tell
Fine explanation of this👍. Can you make a video of autoreclosing duty cycle in 25 kV railway network and fault protection ?
Auto recloser works good in case of single phase fault or three phase fault in one and half breaker scheme?
you deserved more subscriber bro
Thank you 😊 do share within your circle!!
Yes. I admit that. Gaurav sir deserve for all the credits due to his hardwork and the way of his wonderful presentation. Explanation is so much simple. Thanks Gaurav sir.
Thank you Gaurav 💯🙏
Sir please make videos for "How to read Electrical Drawing".
Specially circuit breaker related...
Please make video on Antipumping relay protection.
Please correct the explanation, 3 min it won't close automatically. No breaker will close on auto after 3 min of fault. Reclose for the first time,then it will remain in open if fault persisting. Especially auto reclosing available in only one phase fault condition. Consider in 3 phase line, one line not available for min, then entire power system will be collapsed in negative phase seq. So whatever the duty cycle mentioned, it is the breaker duty and not related to fault clearing time.
Thank YOU.
Excellent brother
Dear Sir, plz make a video regarding how the ac and dc connections are given in control and relay panel as a redundant electrical sources to make system uninterrupted. Also plz tell about where is ac and dc supplies required in control and relay panel for 33kv, 132kv, 220kv and above system.
Pls what is difference between recloser n sectionalizer
Kindly explain third duty cycle CO-15s-CO
Please make the videos of GIS full premium course.
you are a genius bro!
Thank you very much
I have one question why 3 min is kept after CO operation? any specific reason is there?
To build up dielectric strength and detonation
This to recharge the spring for another CO operation
Good explanation
Glad it helped!!
Explain about Line drop compension
Plz explain the protection logic for auto reclose ckt
Please explain trip self reset relay and it's function
Thank you ☺️
Sir, could you please tell me about the lightning strike happening, and how it will impact on higher objects especially in industrial areas.
Where exactly Electrically Gang Operated Circuit Breakers are used Sir ?
Sir plz explain the dead time and reclaim time of autorecloser
Lucid presentation
I think EGO used for 240kV , 420kv and above voltage level.
And MGO used for 145kV system voltage.
Nice Information sir ❤
Yes
goof animation and explanation
Yes, thanks
Thanks for the feedback 😊
yes!
Yes!!
Yes great
Mr Gaurav in my worksite substation for traction power we have SF6 CBs , 3pcs for Incomer 1 and the other 3 for iIncomer2. The center CB is connected by signal and electrical cables with the outer CBs. In case of Transient fault all 3 CBs operate simultaneously. Transparently these CBs are not MGO. So my question is, are these CBs EGO? If Yes Why?
It's very simple to identify EGO Breaker. If each phase/pole has a dedicated mechanism then that means it is an EGO Breaker.
Sir in past 3 months, in our area we had floating neutral fault twice. It has damage many of devices and adapters for all homes in our area. I checked and mostly voltage was around 350v-400v during fault. What device for home do you recommended to prevent this, something that turns off supply in home in such condition. I found device amiciSmart Over/Under Voltage device, but what I found is device is themself rated for only upto 300v max. Device will probably burn or may work for few minutes over 300v or behaviour will be unknown.
Can you suggest what type of device is suitable for home use?
Hello. You can check for different stabilizers.. also nowadays many devices come with an in-built stabilizer.. try checking their ratings
@@GauravJ I do not want stabilizer. I am ok if supply is cut out in such case. It is a rare fault.
YES
I wanted to know is there any video about "how electricity is provided while it's raining and why we don't hear about any accident caused by electricity while its raining?"
Nice video
Thanks for the feedback 😊
Are you gujarati sir ??
Single ph trip command . Pl explain in drawing, how it's achieved
MGO-upto 245KV
EGO-above 245KV
What is rating of EGO and MGO type breaker
Upto72.5kV to 245 kV it can be EGO or MGO and above that rating only EGO mechanism used ....420 kV onwards, up to 800kV
Yes sir
Yes...
Thanks for the feedback 😊
👍
For MGO upto 145kV
For EGO 220kV and above
Yes🎉
Your video is downloaded.
Auto recloser installation
Yes
YES
Thanks for the feedback 😊
Yes
Yes
Yes
Thanks for the feedback 😊
Yes
Thanks for the feedback 😊
Yes
Yes
Yes
Thanks for the feedback 😊
Yes
Yes