"I need 100 blades of this kind! I need an extremely expensive fancy razor! I need a fancy badger brush!". No you don't. If I could travel back in time I'd give myself simple, cheap alternatives and sample packs ALWAYS (blades, soaps, scents). It's a game of "try", not a game of "perfect purchase". It's malleable. Also, with shavettes and sharper instruments, it's not about learning to "ride the bike", it's more like trying to "respect the stallion", you can ALWAYS cut yourself up if you aren't careful. Even an expert with years of experience. Respect, be careful, always. Don't ever shave with the crazy sharp stuff if you're stressed, tired or sick.
Shaved with an $8 Baili BT131(with severe blade alignment issues) for the first time on the morning of a stressful funeral. Cut myself like 5 times. Was rushing and anxious. Never again.
My pet peeve is when someone tells me they have been using the same aerosol cheap shave foam for years and why am I always advising people to use a soap or cream? And I'm like, "Pleeeeease just try a soap and brush, I promise it will make sense then".
It is a simple "jeweler's cloth". A piece of cotton flannel cloth embedded with chemicals for gently polishing jewelry. You can source them at any number of places, but will be hard pressed to find one of this size for a lower price than at the RE.
I’ve done a three pass shave since joining the US military. When using cartridge razors, I did have a ripped up face. Swapping to a good DE with Feather blades and tallow soap, I still do three passes, but I only apply as much pressure as the weight of the razor. To me, this is what saved my face and scalp as I DE shave my scalp too. With quality products, there is no need to feel like pressing the razor as though one was going to shave their gums through their cheeks.
Those cartridge razors teach us very bad technique, like pressing harder when we encounter resistance. It's take a while for me to unlearn and try to only gently touch the razor to my face.
Well done sir. I have everything nailed with the exception of the 3 pass. I admit in the beginning it was a rough go, but over time I honed my shaving skills and I can execute a 3-pass shave with no problems. Occasionally I will get a nick here or there, but never ingrown hairs or razor burn. Thank you for what you do in the community.
Me too. It took me a while, and I am still learning, but I can absolutely see the difference in my shaving techniques, habits, and overall experience. I think patience is the key to a good quality shave. In the beginning, I felt really stupid. A mess everywhere, blood everywhere and not a good shave. I’m so glad I’m sticking with it. The straight razor is my next adventure.🪒
@@GenXAccord you are not, sir! I make 10 passes on my neck and still can’t get one side clean shaven. I’m afraid to use a straight razor for fear of slitting my own throat.🙂
I have a buddy who was so proud to show my the "Damascus" straight razor he was thinking about buying from some online shop. I tried to be as polite as I could, and told him about the eBay shop I had purchased a couple of less flashy razors from, but shaved beautifully.
Thanks for your comments about the 3 pass shave. Last month I decided to try only a single pass for the month to see how it worked out. Turns out I'm hooked. A single pass helped me to improve my technique and I also learned that, for me, if things are going to go wrong with a shave, it's after the first pass.
I heard the "3 pass" mantra when I got my first DE razor a couple of months ago. It didn't take long for me to see a video with Matt talking about just trying a single pass and gave it a shot. My alum bar tells me I'm being much kinder to my skin and the shave is quite sufficient 😊
Congrats - you're the winner of the Weekly T-Shirt give-away! Please contact us at help@razoremporium.com with your address and size and we will get it shipped out right away! Thanks everyone! Stay tuned next week for another giveaway! - Razor Emporium Team
#6 - Why don't more shave soap companies offer samples? I want to try different soaps, but I'm not sure if I will like the scent. I don't want to spend $20-25 for something I may not like... to then have to discard it. This is part of why I love Stirling Soap Co. I also love their products. They offer samples of their shave soaps, AS splashes, and AS Witch Hazels. My hats off to Rod & Mandy.
It's because making samples is a loss leader. No matter what you charge for, it usually does not make any money. In fact usually loses money. But the hope is that a customer buys the full size.
@@RazorEmporium Thanks for the quick reply, Matt. I really enjoy your channel and have made several purchases from your store. I understand that they are a loss leader. However, because I got to sample them first, I have purchased multiple full-size tubs of Stirling.
My pet peeve is when someone commenting on an Internet forum makes an absolutist recommendation (eg “the R41 is the best razor ever and I never nick myself with it”), but then it turns out they have a beard and mustache and only need to shave their cheeks.
One I have is soaps and/or creams. Some snobs on the forums say that only expensive artisan soaps/creams are worth using. That is total BS. I've been wet shaving with safety razors for a long time and can say with certainty that some of the best performing soaps/creams available are also some of the cheapest. Arko, Cella, Tabac just to name a few. Those are some of the cheapest available and also some of the best performing soaps I've ever used. I don't even buy artisan soaps anymore because other than the fancy smells they can, and in some cases usually do, perform worse than the cheaper options. Don't get caught up in the rabbit hole and start believing you need those fancy artisan soaps to get a good shave. Prep and technique are the biggest factors when it comes to a great shave. Another pet peeve I have is with the actual razor. You will read on forums that you must get a stainless steel razor. You'll read that zamak is garbage and won't last but a few years. Again, total BS. I still have my very first Edwin Jagger DE89 made primarily of zamak. Mine is coming up on 20 years old. I wash it with a tooth brush and soft soap every blade change and it's still looks like new. You don't need a SS razor. In fact, I would argue that the chrome plated zamak razors are smoother and so glide better on the skin. So because of that they actually feel better during a shave than SS. My recommendation to any and all wet shavers out there, new and old, is to focus your attention on your prep and technique. You don't need the sharpest blades or the fanciest of artisan soaps to get a great shave. You don't need a stainless steel razor or the most expensive shave brush. Keep it simple and perfect your prep work and technique. Do that and you'll get a better shave.
Matt, great video! I think the idea of badger brushes being the best would be my #6. It's personal preference. It all depends on how you use it and I would think how your face reacts with it...IMHO. When I started not long ago in the Summer of 23, I always used warm to hot water for shaving and it was affecting my skin especially rinsing. Your advice on cold water usage was the best thing ever happened to my routine. My complexion got so much better. I do 3 passes and my skin can handle that, but the cold water is key. Thank you😊
Hey, quick question - when referring to cold water usage on the face, are you talking about before shaving, after shaving, or both? I'm just getting started with DE razor shaving so sry if this is an obvious question ;3
@@zarkydunnun7378 Hey sorry about the late response. In my opinion you should shave after a warm shower so your stubble is softened. You can also use a Pre-Shave cream like Proraso or a Pre-Shave oil, or a Pre-Shave Soap like they sell at Razor Emporium. You could lather with tepid water, BUT definitely rinse your face after with cold water to close up the pores, reduce inflammation and irritation. Then use a nice soothing balm to help cool your face more and provide good nutrients for your face. I learned this from watching Matthew Pisarcik's tutorials.
My biggest pet peeve is when “know it all a$$holes” from places like Badger and Blade are always complaining about the businesses like Razor Emporium who are attempting to bring diverse products to those of us wanting product outlets…oh and to make a living in this market.
Having shaved for over 60 years I must admit I had never had or heard of razor bumps, razor burn or any of the other shaving problems. Having had no guidance for shaving I just shaved down and the up to give myself a clean smooth shave and that was it. Used shaving soap, a bowl, and a safety razor that was my Father's and have of late, since watching a few YT shavers, tried some new razors and shaving product but mainly as a hobby to entertain myself in my retirement years. But thanks for your pet peeves', interesting information.
Hi Matt. I am a three pass straight razor shaver and I am fortunate that I don't get bumps or in-grown hairs. I can get away with two, but I enjoy that 3rd pass. Take care.
One of my pet peeves regarding other RUclips videos ist some guy whipping up enough lather in his bowl to provide three or four guys each a three-pass shave
Feather and Kai are no doubt sharp but comfortable they are not. I've had my worst cuts and nicks with a Feather and a Kai will give me weepers where there is no obvious cuts. Wilkinson Sword, Permasharp, Gillette Nacet and Astra Green are sharp enough and generally won't get you prepped for a blood donation. And I can personally vouche for the old toothbrush and dish liquid cleaning method. If you ever have a problem with rust stains from the razor? 2000 grit sandpaper from an auto parts store/Walmart and a little clipper oil.
Agreed about the Feather, haven't tried Kai. I can only do one pass with a Feather, which almost always results in some drama. Pre, post and technique doesn't matter to my skin, the Feather just digs in too much for me. If I chase bbq with a Feather (i.e. three pass) then I'm just looking for trouble. Getting too old for that hassle.
SO true about the 3 passes. I find that the third pass is when I start getting bumps and nicks (but only a few) since thats my across the grain pass. I just want those two patches across the lower sides of my neck SO BAD! I guess I haven't gotten the right pressure down yet, all in due time though.
Synthetics have come a long way. I can get better overall feel and comfort with synthetics than anything that I own (based on the type of nylon or material). I still think animal hair brushes have their place, though.
Agree 100% about that 3 pass shave Matt.... I always do blade buffing when I shave.... Excellent point...! I go over areas that need attention but that's it...Greg
Very nice video, Matt. Thanks for the cold water shout out. I have been doing cold water shaves for more than 10 years now. I do a two pass shave with touch ups. I think I will try to do a one pass shave with more buffing strokes. I do some buffing now. Fifty years ago in my early shaving days and goo, it was lather, one pass, and done. It was not enjoyable, but the last 15 years have been the best. Thanks again for your work in the world of wet shaving.
Thanks for this much information! I'm never thinking about what my peeves are Maybe that so many people tell Feather is so sharp it's not for beginners it's not for, I don't know more! And then my first shave with a Feather was the smoothest shave in my life!
Matt, thanks for sharing. I can honestly confess that I'm a BBS chaser. But I wasn't that way when I first started. So, I would tell any new wet shaver to only do one pass until they are adept at shaving with NO nicks or irritation. Three passes aren't needed either. I have even learned to get 3-pass results in one lathering (plus occasional pickups). If you've ever watched the "Wet the Face" channel, you can see what I'm talking about. Now here's my #1 pet peeve after watching so many shaving videos. And it's not about technique, hardware, or software. It's those wet shavers who say "I'll close my pores with cold water." Skin pores are ALWAYS open. They may be clogged but they NEVER close. Cold water, alum, witch hazel, whatever may soothe and refresh the skin but they don't close the skin pores. That's why the post-shave is so important.
I'm still relatively new at the wet shaving community. My technique is probably still in the toddler stages. I mainly use a Rockwell T2 or a Leaf TWIG, and I am always trying different blade combinations and settings. I am definitely going to try the cold water thing. I'm always searching for that comfortable shave for my sensitive lower neck.
Cold water works. It shocked me but it does. And it doesn't have to be ice cold either. Room temp or slightly lower. Eliminates 80 of the razor burn. The next 20% is the amount of pressure you are putting on the razor. Lighten it up. Imagine the razor being a feather that you are lightly caressing on your skin.
Love this video Matt. I am going to try the buffing technique. As a matter of fact I believe SinatraLennon uses this technique. I agree with the sharpness of the blade. Use what is comfortable for you. I do use a toothbrush to clean my razors and occasionally I use an ultrasonic cleaner on my razors. See you soon at the Maggard meetup. Have a great week. 👍
The sample packs from Razor Emporium are awesome. I used Gillette 7 Yellow for years. After I got more experience with a double edge razor, I realized I was getting a decent shave with them but usually had to do more passes than I would prefer. After watching some of Razor Emporium's videos on sample packs I decided to try a few. After trying many different types of blades, I settled on Kai. They provide me with a much better shave than the blades I was using previously.
Great video Matt thanks for the information with regards to the 3 pass shave just shows you don’t have to do a 3 pass shave it’s not essential will try something different on my next wet shave
Love the new video. My pet peeve, when a newbie informs me I’m not making my lather correctly. Huh?! I’ve only been using a brush since the mid seventies! My lather works for me. lol. I don’t mind newbies asking questions… like what’s the best or sharpest blade. Always hear that one. But hey, they’re newbies, I get it. And yep, I tell them use dawn soap and a toothbrush. BTW I love your cleaning cloths
I do a two pass shave but my neck is sensitive but as long as I don't go for a baby butt smooth finish I don't have any issues. I think my number 6 would be, it is OK to NOT have a baby butt smooth shave. I am going to try the single pass with the grain while buffing.
"Don't try to reach the baby butt smoothness! It led to irritation, cutting, bleeding, then crusts and peels on skin, ingrown hairs, etc." - the best advice I've took from old wetshavers ever! And cold water - completely agree, the best results are reached with cold water, not the hot! (Yes, you can wet your hairs to the soft level with cold water and then experience more close shave! Try it out!)
Hey, quick question - when referring to cold water usage, are you talking about before shaving, after shaving, or both? I'm just getting started with DE razor shaving so sry if this is an obvious question ;3
@@zarkydunnun7378 Wetting your hairs before shaving with cold water also gives the softness to your hairs as the hot/warm water as well, as the hairs just simply get wet and soak moisture. But cold water closed your pores on a skin and freeze nerve endings in your skin, so skin became less sensitive. So start shaving with cold water with more care as the skin less sensitive. You can have closer shave with cold water. But afterwards if you apply three passes - you can have an irritation as well, but less in comparison of starting with hot water. But it hugely depends on your hair and skin type. Sometimes doing both, applying cold water before and after shave, works best, especially for aggressive blades, like Feather, as skin became less sensitive and more tight and rigid. And again, there's no need to trying out to reach BBS - two passes more than enough, with the grain and across the grain in optimal, or maybe against the grain if the hairs and blade allow to do that without irrigation and microcuts. , and also the blade sharpness, mildness, the razor (gap, attack angle), etc. I was experimenting with many razors and Rockwell 6C and 6S gives the best and consistent results, even with pretty different blades! So, there're a lot of space for experiments and revealing what's the best working for you. I've got thick hairs and sensitive skin. Now I'm staring with more or less warm water (warmer water moisturizing hairs just faster) and after finishing with washing down everything with cold water, to close the pores, switch off sensitivity, and decrease irrigation. Also alunite applying afterwards and good aftershave cream/balm/lotion always counts!
@@AndrewBednoff So essentially the only way to know whether cold or hot water would be more ideal for me to prep my face is to try both and see how it works, right? I was confused at first because I heard different suggestions from different wet shaving YT'ers on what temperature of water is best for preparing your face. From my understanding, hot water softens the beard and opens pores so the razor can glide more smoothly, while cold water closes the pores and tightens the skin to reduce inflammation. Both have differing advantages in terms of reducing the chance of irritation, which is why I wasn't sure which to trust. But anyway I'll just have to give both a try and see what works best for my skin I suppose. Thanks.
@@zarkydunnun7378 Yeah! Right! Try out cold water before and after, several times, to gather experience and feelings. And then try out warm/hot water before and cold water after shaving, to compare results and feel the contrast and difference. The only way is to try what will work best for you!
Yeah, that gets me, too, lol. Like, you didn't even build anything. That's why I scoop and bowl lather. Much more effective for what I want in my shaving sessions.
My pet peeve is when I try to explain to people they can get a fantastic shave with a DE or single edge razor and they proceed to argue with me that a multi bladed razor is superior! They've been brainwashed by the marketing and refuse to see the light, it really is frustrating. Cheers from Nova Scotia…MikeR. ( p.s. love the restoration job Razor Emporium did on my Gillette Fat Boy😊 came back looking and feeling like a brand new Razor..thanks goes out to the team.)
This is a very practical and helpful video, despite being presented as a handful of pet peeves. A cold water 2 pass shave is my normal routine. I have no interest in chasing the perfect shave. Straight razors scare me, mostly because they require maintenance and care that I am not up to speed on. I regard them as a niche tool for a highly experienced shaver with too much time on their hands. ;-) I spent a fair amount of money at the very start on a Simogue SOC badger brush, and have zero regrets. I may eventually add a synthetic brush to the den, probably a Simpson, but am in no hurry to do so. A razor blade pack is absolutely critical for a new shaver. IMO, Japanese blades are overpriced luxury items. I have a few tucks, but have never even tried them. My first few auction bought vintage DE razors were pretty nasty when I got them. I soaked them in dish detergent and water for 2 days to loosen up the gunk, cleaned them up with an old toothbrush and hot soapy water as best I could. Then I ran them throught the dishwasher. They came out really nice. Do NOT forget to disinfect your used razors before you use them. Rubbing alcohol will kill bacteria and viruses. Barbasol will kill these and fungus as well.
I do a three pass shave. I don't do WTG XTG ATG. I got my idea from "method shaving" I do WTG, WTG again for 2nd pass. My final is a half XTG, only 45 degrees off of WTG. This is not a full XTG. This gets me a close shave without problems. Back in my dark (cartridge) days. I did 6 months with a beard, shave 6 months. DE shaving has made shaving enjoyable! I've not had a beard in almost 10 years!
😂. That was me! When I started, the sharpest blade was the best blade! NOT!!! Yes, lose the word sharpest! Oh, it wasn't pretty and I wanted to give up, but I stuck with it. Now it's a Shark, Treet or Lord for me, all of which are in the middle of the sharp chart. Thanks!
There are plenty of razors where the head does cover the tabs... my Henson and a new razor I am waiting on, Yates Merica. I do have 2 older Gillette TTO razors that don't cover the tabs. They have not been an issue. Just go slower and be careful. 😊
Hey Matt great video as always. My pet peeve is my wife asking me how many razors do you need? My answer is all of them! I love the hobby and enjoy the whole process of shaving.
The two areas of main focus to put money into should be: razor blade and after shave. There are some razors objectively better than others, but mostly it will come down to what type of blades it can accept. The last one is after shave. I lump alum, rub/balm/lotion and septic stichk into this. Find a combo that works well based on your skin and hair coarse type.
I’ve seen several comments here about three passes for BBS. I do three passes because of how coarse my beard is. If I want BBS for a particular reason, I treat me DE as a woodworker treats 60 grit sandpaper. Then I have ultra cheap two or three blade cartridge that I do a light pass with, similar to polishing with 1,000+ grit sandpaper. DE does the down, up, and straight across. The cheapo does a forty-five bottom to opposite top stroke. This is because of the insane way my hair grows around my jaw-ear area.
I’m bummed you lured me here because of the thumbnail in the email with the sweet light blue REX Tshirt and then I get here and it was click bait! 🤣🤣🤣😜 - Brian F
Thank you for posting this video. I have watched your other videos and in one of them, you advised not using Barbicide and to just clean the razor with a toothbrush and dishwashing detergent. That is what I do, now. I feel more connected to my razor as a result. I did get a sampler kit of razor blades long ago, and I learned that I like a certain brand best. I have stayed with that brand, but I still have many blades from the sampler kits. I like to do a 2 pass shave. I have not heard of 'blade buffing' before. I will have to look into doing that. What I like doing best of all is lathering with nice warm shaving cream. I like the feeling of cold water. Given my age, I think I have other goals that are higher priority than a super close shave. Perhaps some day I will try cold water, it gives me goose pimples just thinking about them. What I do fuss about is the razor itself. I want the best razor that I can get spouse permission to buy for myself.
There are so many truly wonderful blades out there. Other people can suggest, but you must decide for yourself. I've read how wonderful some blades are, but I was unimpressed. I've also been told that blades I really like are trash. Sample pack is the way to go. Just try stuff.
One of my pet-peeves is after ONE attempt people give up on wet shaving. Sure there's lots of variables and things to try so that's why giving up after one try is so maddening to me. A related one is just mentioning a safety razor people are intimidated or flat out scared by the DE blades - yes, handling them incorrectly can yield a drop or two of blood but I've NEVER been cut (only nicked when shaving too fast) from installing or removing a DE blade.
My pet peave? People who tell me that cartridge razors are the geatest. Sorry, they are kinda flakey things. My shave is a one pass with a clean up, for the stragglers. My blade is either a Feather, Kai, Lab Blue, or a Nacet. Because, for me, they have the best results. I occasionally soak my razors in hot water to remove gunk from them and to sterilize them from use and handling.
I buff and STILL need three-plus passes most times to get a good, close shave (yes, I chase BBS - any hint of stubble at the end of a shave drives me nuts!). Wiry beard, I guess. But hey - I enjoy the process, and rarely get nicks or irritation. Though I'd love to be able to get away with fewer passes when I'm in a rush...
I'm not very cognizant about straight razors, so I wouldn't know about plinking the edge (even thought I've seen Matt talk about them). I'm comfortable enough using double-edged razors for what I need and I'm not interested in having to hone and strop razors much. Also, I personally do a 3.5 pass shave because of the type of hair that I have (and I've also done a grain mapping of my face) and how much can be left, but I'm VERY careful with my lathering and technique that I RARELY get a massive level of irritation or bumps unless something is wrong with one of the items I'm using, mostly razor blades which I test every now and then. I've learned a lot through these videos and through TONS of experimentation, so I've never really had to ask a ton of questions like this. Seek the information, and you will find it somewhere.
If I'm running short on time I grab my electric (razor) - if I'm not (short on time) after I lather up I'll say (out loud) "slow down" - amazing how two words avoids getting cut by your own doing ;-)
#6 is: "Which artisan makes the best soap?" and/or "Who makes the slickest soap base?". I want to scream like Matt everytime I see those polls in various groups. Probably because it's such a subjective question and draws out the shills. I have my personal favorites of course, but I always try and be fair, realizing that not everyone is going to like what I like, or even have the same circumstances to replicate my shave experience with the products I enjoy. Wet shavers need to pace themselves and focus more on their own personal enjoyment and skill building vs chasing FOMO.
I learned very early on that three passes don’t work for me. Thanks for the vid-I enjoy watching some of the junk “science” I’ve read in forums get debunked.
I just purchased my first straight razor. I have a couple of knives that i sharpen that I can shave with. Mick dundee status.... They are 1066 high carbon. Yes There is a tremendous difference in how carbon steel behaves on my sharpening system. Do i really need to go buy a bunch of wet stones? I already have a few ceramics, strops and compounds. Perhaps you can recommend a few that will work?
I guess I would say that it bugs me when folks talk up the feather blade to a point that they have made others fearful of it. It’s just a blade, you can get cut with any of them. I done a Halloween shave one time with a feather blade and Muhle r41 razor. No cuts or anything. Because I paid attention to what I was doing. Also that leads me to another issue lol, people will actually talk about a razor like the r41, oh it’s so aggressive it’s scary? Are we in middle school still?
My pet peeve in the wet shaving world. Seeing people splurge hundreds of dollars on an expensive shave soap collection they won't get to fully use up before they go bad. Like yeah I get it - you love shaving soaps. But man, take it easy. You don't need to spend hundreds for slick soaps and creams. The $15-20 jars of shave soaps work perfectly too and lasts you many months, each!
I agree. I thought part (not all) of this was to stop paying the high prices for cartridges. Are we just going to spend the savings on all the other products instead?
A good way for the soap to not go bad is to do scooping techniques instead of lathering through the tub. I recommend looking at a video by Tobin Fetters on Why I Scoop and it gives good info. on why it is better to be a scooper than a tub latherer, part of which it preserves and saves your soaps from having any issues in the future with bacteria, scent strength, shrinkage, etc.
If i had a goatee i would only need a single pass as well. If you can reccomend a blade/razor combo that can do chin with a single with the grain pass please?
I like a three pass shave and enjoy the time I spend shaving. My pet peeve is people who need 3/4 of an inch of shaving cream for a blade that is .0087 mm thick.
#6- Super expensive brushes. Turning handles is an art and I definitely support artisan quality as well as the price on quality animal hair, but to act as if it’s “necessary”, not so much
Pet peeves: 1. When someone says they can't use a Tech or Super Speed because they're "too mild." As if their stubble is way different than the father/grandfather they inherited it from. 3. Seasonal scents 4. Not putting razor blades in Halloween candy. We've heard about it for years, and finally have a chance to make it happen, but noooooo, we hand out "fun sized" candy bars with no razor blades. 5. People skipping #2 as if people won't notice.
After I brush with dish soap, I lightly polish with Bar Keeper's Friend. I've looked and paid close attention and I haven't seen any plating go away. Anyway, I always give this advice about blades: There is no best blade. The best blade is the one that works for you. That being said, there are such things as low quality and high quality blades. Everyone is different on blades. Take the Astra Green. A blade that is widely used and most people like them. However, not all people like them. Same blade, different face. You have to try everything. My pet peeve is new people that don't want people to think they're new, so they'll show off some product or advice that is beginner advice, but they learned the lingo, so it sounds like an established shaver. These are the people that refuse to admit they're wrong and when you're trying to correct them, they get argumentative and go all in on it.
My absolute biggest pet peeves are when snobs say that this is a "Beginners Razor or Beginners Razor Blades." Just so damb elitist!!!! I have over 60 vintage and modern razors in my collection, several costing $70 - $120. I swear, soooo many of my $35 and under razors shave just as well, even better, than the expensive ones: Merkur 34 HD, 1904, 23c, Edwin Jagger, Rapira Tech ($10), Parker 78r, and several RazoRock razors! Do not let price fool you! Right now I am loving Gillette Wilkinson Blades made in India. The are under $8 for 100. Feathers are $40 + for 100. The Gillette Willkinson give me one less shave per blade but are way better in comfort and do the job great!
I’ve never understood 3 pass shaving. You get the job done in one, and if you have stragglers, massage the leftover soap on your face with water and gently go over it. It will be a smooth shave, I promise you.
#6 super expensive sharpening stones, then people say my razor will not sharpen, I got a $500 Jnat & it don't work. There is a lot of skill required to set the bevel & hone a razor. It can't be done like sharpening a woodchucks pocket knife.
The perfect razor for everything and 3 passes. Nah! I have had great results with a more aggressive razor with the grain and a gold Tech against the grain. Easy, comfortable, consistent and fun.
People who make objective statements about the myriad subjective things in wet shaving. YMMV but that only applies to blades other than my personal favorites, Titanic Superior Platinumchrometetrafluoroethylene!
Hey Matt excellent video as always. I would love to win the Razor Emporium shirt so my pet peeve is that every time I buy a new razor my wife asks me how many razors do I need. My answer is all of them lol. I love trying new razors,blades,brushes and soaps as do probably most of us!
My pet peeve is people wasting shaving soap because they watched a RUclips channel that tries to sell as many soaps as possible. "Look at how rich, thick, and big my lather is!"
I stated in my own comment, I have been three pass shaving since my military days. I ripped my face up with cartridges, but with DE wet shaving, I learned to let the weight of the razor do the work, now I don’t have the ripped up face issue anymore. My issue may not be the same with you, or you may not have noticed yourself doing this. If you haven’t paid particular attention to pressure, consciously monitor how much pressure you’re applying next time.
Excellent Matt👍👍 Pet Peeves.. everybody has them and they remain a PITA because they never go away, always rearing their ugly head when least expected. I know this video was about wet shaving specifically but pet peeves run the gambit in life. If only there was an answer to elimination.....
@brianzionts-bernstein8609 I'm happy for you, and hopeful you've had the pleasure of experiencing some different de razors since. The Henson performed fine for me I guess, but was nothing to write home about IMO. It not rocket science, and they've not developed anything new, other than the general appearance of the thing... contrary to what they'd like to claim.
Henson does market rather aggressively and can get annoying. However,it was their commercials on Facebook etc. that got me interested in DE shaving (even if I bought a Game Changer for my first razor instead). So I guess I am grateful.
My biggest pet peeve is people buying all their shave supplies off Amazon. I get that it's easy. But why not support small business and actual people that support and care about shaving? I'm not saying that I never use Amazon. But it's always a last resort. I will always support the person passionate about their business first over some giant internet magnate.
"I need 100 blades of this kind! I need an extremely expensive fancy razor! I need a fancy badger brush!". No you don't. If I could travel back in time I'd give myself simple, cheap alternatives and sample packs ALWAYS (blades, soaps, scents). It's a game of "try", not a game of "perfect purchase". It's malleable. Also, with shavettes and sharper instruments, it's not about learning to "ride the bike", it's more like trying to "respect the stallion", you can ALWAYS cut yourself up if you aren't careful. Even an expert with years of experience. Respect, be careful, always. Don't ever shave with the crazy sharp stuff if you're stressed, tired or sick.
I feel personally attacked…
This is great advice.
Shaved with an $8 Baili BT131(with severe blade alignment issues) for the first time on the morning of a stressful funeral. Cut myself like 5 times. Was rushing and anxious. Never again.
My pet peeve is guys attempting to make shaving a subset of rocket science.
My pet peeve is when someone tells me they have been using the same aerosol cheap shave foam for years and why am I always advising people to use a soap or cream? And I'm like, "Pleeeeease just try a soap and brush, I promise it will make sense then".
I got my daughter into using shave soaps (Catie's Bubbles) on her legs when shaving and she loves it. Catie's Bubbles scents are a lot more feminine.
Fancy polishing cloth. I knew there was a side hustle to this video.😂
It is a simple "jeweler's cloth". A piece of cotton flannel cloth embedded with chemicals for gently polishing jewelry. You can source them at any number of places, but will be hard pressed to find one of this size for a lower price than at the RE.
I’ve done a three pass shave since joining the US military. When using cartridge razors, I did have a ripped up face.
Swapping to a good DE with Feather blades and tallow soap, I still do three passes, but I only apply as much pressure as the weight of the razor. To me, this is what saved my face and scalp as I DE shave my scalp too.
With quality products, there is no need to feel like pressing the razor as though one was going to shave their gums through their cheeks.
Those cartridge razors teach us very bad technique, like pressing harder when we encounter resistance. It's take a while for me to unlearn and try to only gently touch the razor to my face.
Well done sir. I have everything nailed with the exception of the 3 pass. I admit in the beginning it was a rough go, but over time I honed my shaving skills and I can execute a 3-pass shave with no problems. Occasionally I will get a nick here or there, but never ingrown hairs or razor burn.
Thank you for what you do in the community.
Me too. It took me a while, and I am still learning, but I can absolutely see the difference in my shaving techniques, habits, and overall experience. I think patience is the key to a good quality shave. In the beginning, I felt really stupid. A mess everywhere, blood everywhere and not a good shave. I’m so glad I’m sticking with it. The straight razor is my next adventure.🪒
@@craighellberg4366 awesome! Yeah I have yet to master the straight razor. But same here, it is my next adventure as well.
Am I the only one who will do a 4 and 5 pass to make sure the BBS is really smooth? On the face...the neck is impossible to get BBS.
A three pass is THE only way to go…..anything less and you’re haven’t shaved at all!!!!
@@GenXAccord you are not, sir! I make 10 passes on my neck and still can’t get one side clean shaven. I’m afraid to use a straight razor for fear of slitting my own throat.🙂
I have a buddy who was so proud to show my the "Damascus" straight razor he was thinking about buying from some online shop. I tried to be as polite as I could, and told him about the eBay shop I had purchased a couple of less flashy razors from, but shaved beautifully.
Thanks for your comments about the 3 pass shave. Last month I decided to try only a single pass for the month to see how it worked out. Turns out I'm hooked. A single pass helped me to improve my technique and I also learned that, for me, if things are going to go wrong with a shave, it's after the first pass.
I heard the "3 pass" mantra when I got my first DE razor a couple of months ago. It didn't take long for me to see a video with Matt talking
about just trying a single pass and gave it a shot. My alum bar tells me I'm being much kinder to my skin and the shave is quite sufficient 😊
Congrats - you're the winner of the Weekly T-Shirt give-away! Please contact us at help@razoremporium.com with your address and size and we will get it shipped out right away! Thanks everyone! Stay tuned next week for another giveaway! - Razor Emporium Team
@@RazorEmporium Yay! email is on the way!
#6 - Why don't more shave soap companies offer samples? I want to try different soaps, but I'm not sure if I will like the scent. I don't want to spend $20-25 for something I may not like... to then have to discard it. This is part of why I love Stirling Soap Co. I also love their products. They offer samples of their shave soaps, AS splashes, and AS Witch Hazels. My hats off to Rod & Mandy.
It's because making samples is a loss leader. No matter what you charge for, it usually does not make any money. In fact usually loses money. But the hope is that a customer buys the full size.
@@RazorEmporium Thanks for the quick reply, Matt. I really enjoy your channel and have made several purchases from your store.
I understand that they are a loss leader. However, because I got to sample them first, I have purchased multiple full-size tubs of Stirling.
My pet peeve is when someone commenting on an Internet forum makes an absolutist recommendation (eg “the R41 is the best razor ever and I never nick myself with it”), but then it turns out they have a beard and mustache and only need to shave their cheeks.
You can tell this was really cathartic for Matt.
Lol 😂
Totally agree about the three pass myth. I just do one pass, and then a bit of a touch up on the difficult part (every face has one). Job done.
One I have is soaps and/or creams. Some snobs on the forums say that only expensive artisan soaps/creams are worth using. That is total BS. I've been wet shaving with safety razors for a long time and can say with certainty that some of the best performing soaps/creams available are also some of the cheapest. Arko, Cella, Tabac just to name a few. Those are some of the cheapest available and also some of the best performing soaps I've ever used. I don't even buy artisan soaps anymore because other than the fancy smells they can, and in some cases usually do, perform worse than the cheaper options. Don't get caught up in the rabbit hole and start believing you need those fancy artisan soaps to get a good shave. Prep and technique are the biggest factors when it comes to a great shave.
Another pet peeve I have is with the actual razor. You will read on forums that you must get a stainless steel razor. You'll read that zamak is garbage and won't last but a few years. Again, total BS. I still have my very first Edwin Jagger DE89 made primarily of zamak. Mine is coming up on 20 years old. I wash it with a tooth brush and soft soap every blade change and it's still looks like new. You don't need a SS razor. In fact, I would argue that the chrome plated zamak razors are smoother and so glide better on the skin. So because of that they actually feel better during a shave than SS.
My recommendation to any and all wet shavers out there, new and old, is to focus your attention on your prep and technique. You don't need the sharpest blades or the fanciest of artisan soaps to get a great shave. You don't need a stainless steel razor or the most expensive shave brush. Keep it simple and perfect your prep work and technique. Do that and you'll get a better shave.
Matt, great video! I think the idea of badger brushes being the best would be my #6. It's personal preference. It all depends on how you use it and I would think how your face reacts with it...IMHO. When I started not long ago in the Summer of 23, I always used warm to hot water for shaving and it was affecting my skin especially rinsing. Your advice on cold water usage was the best thing ever happened to my routine. My complexion got so much better. I do 3 passes and my skin can handle that, but the cold water is key. Thank you😊
Hey, quick question - when referring to cold water usage on the face, are you talking about before shaving, after shaving, or both? I'm just getting started with DE razor shaving so sry if this is an obvious question ;3
@@zarkydunnun7378 Hey sorry about the late response. In my opinion you should shave after a warm shower so your stubble is softened. You can also use a Pre-Shave cream like Proraso or a Pre-Shave oil, or a Pre-Shave Soap like they sell at Razor Emporium. You could lather with tepid water, BUT definitely rinse your face after with cold water to close up the pores, reduce inflammation and irritation. Then use a nice soothing balm to help cool your face more and provide good nutrients for your face. I learned this from watching Matthew Pisarcik's tutorials.
My biggest pet peeve is when “know it all a$$holes” from places like Badger and Blade are always complaining about the businesses like Razor Emporium who are attempting to bring diverse products to those of us wanting product outlets…oh and to make a living in this market.
Personally I use a two pass technique and have never had issues with ingrown hairs. Works for me…..
Having shaved for over 60 years I must admit I had never had or heard of razor bumps, razor burn or any of the other shaving problems. Having had no guidance for shaving I just shaved down and the up to give myself a clean smooth shave and that was it. Used shaving soap, a bowl, and a safety razor that was my Father's and have of late, since watching a few YT shavers, tried some new razors and shaving product but mainly as a hobby to entertain myself in my retirement years. But thanks for your pet peeves', interesting information.
Hi Matt. I am a three pass straight razor shaver and I am fortunate that I don't get bumps or in-grown hairs. I can get away with two, but I enjoy that 3rd pass. Take care.
One of my pet peeves regarding other RUclips videos ist some guy whipping up enough lather in his bowl to provide three or four guys each a three-pass shave
Feather and Kai are no doubt sharp but comfortable they are not. I've had my worst cuts and nicks with a Feather and a Kai will give me weepers where there is no obvious cuts. Wilkinson Sword, Permasharp, Gillette Nacet and Astra Green are sharp enough and generally won't get you prepped for a blood donation. And I can personally vouche for the old toothbrush and dish liquid cleaning method. If you ever have a problem with rust stains from the razor? 2000 grit sandpaper from an auto parts store/Walmart and a little clipper oil.
Agreed about the Feather, haven't tried Kai. I can only do one pass with a Feather, which almost always results in some drama. Pre, post and technique doesn't matter to my skin, the Feather just digs in too much for me. If I chase bbq with a Feather (i.e. three pass) then I'm just looking for trouble. Getting too old for that hassle.
Bbq? Lol, gotta love auto spell combined with aging eyeballs. See what I mean about getting too old? Anyway, meant bbs.
SO true about the 3 passes. I find that the third pass is when I start getting bumps and nicks (but only a few) since thats my across the grain pass. I just want those two patches across the lower sides of my neck SO BAD! I guess I haven't gotten the right pressure down yet, all in due time though.
#6 Badger brushes are so much better than synthetic. Well maybe 20 years ago. Today they're fine.
Great video!
Synthetics have come a long way. I can get better overall feel and comfort with synthetics than anything that I own (based on the type of nylon or material). I still think animal hair brushes have their place, though.
I'm several years into using my Rex Ambassador, I love it more as time passes it's the only one I use now! Keep up the good work
Agree 100% about that 3 pass shave Matt.... I always do blade buffing when I shave.... Excellent point...! I go over areas that need attention but that's it...Greg
Very nice video, Matt. Thanks for the cold water shout out. I have been doing cold water shaves for more than 10 years now. I do a two pass shave with touch ups. I think I will try to do a one pass shave with more buffing strokes. I do some buffing now. Fifty years ago in my early shaving days and goo, it was lather, one pass, and done. It was not enjoyable, but the last 15 years have been the best. Thanks again for your work in the world of wet shaving.
Thanks for sharing!
Thanks for this much information! I'm never thinking about what my peeves are Maybe that so many people tell Feather is so sharp it's not for beginners it's not for, I don't know more! And then my first shave with a Feather was the smoothest shave in my life!
Matt, thanks for sharing. I can honestly confess that I'm a BBS chaser. But I wasn't that way when I first started. So, I would tell any new wet shaver to only do one pass until they are adept at shaving with NO nicks or irritation. Three passes aren't needed either. I have even learned to get 3-pass results in one lathering (plus occasional pickups). If you've ever watched the "Wet the Face" channel, you can see what I'm talking about. Now here's my #1 pet peeve after watching so many shaving videos. And it's not about technique, hardware, or software. It's those wet shavers who say "I'll close my pores with cold water." Skin pores are ALWAYS open. They may be clogged but they NEVER close. Cold water, alum, witch hazel, whatever may soothe and refresh the skin but they don't close the skin pores. That's why the post-shave is so important.
Agreed! Good stuff here
I'm still relatively new at the wet shaving community. My technique is probably still in the toddler stages. I mainly use a Rockwell T2 or a Leaf TWIG, and I am always trying different blade combinations and settings.
I am definitely going to try the cold water thing.
I'm always searching for that comfortable shave for my sensitive lower neck.
Cold water works. It shocked me but it does. And it doesn't have to be ice cold either. Room temp or slightly lower. Eliminates 80 of the razor burn. The next 20% is the amount of pressure you are putting on the razor. Lighten it up. Imagine the razor being a feather that you are lightly caressing on your skin.
Love this video Matt. I am going to try the buffing technique. As a matter of fact I believe SinatraLennon uses this technique. I agree with the sharpness of the blade. Use what is comfortable for you. I do use a toothbrush to clean my razors and occasionally I use an ultrasonic cleaner on my razors. See you soon at the Maggard meetup. Have a great week. 👍
Absolutely!
You covered all the bases Matt! The RE polishing cloth is fantastic!
The sample packs from Razor Emporium are awesome. I used Gillette 7 Yellow for years. After I got more experience with a double edge razor, I realized I was getting a decent shave with them but usually had to do more passes than I would prefer. After watching some of Razor Emporium's videos on sample packs I decided to try a few. After trying many different types of blades, I settled on Kai. They provide me with a much better shave than the blades I was using previously.
Excellent
Great video Matt thanks for the information with regards to the 3 pass shave just shows you don’t have to do a 3 pass shave it’s not essential will try something different on my next wet shave
You should be a stand up comedian; absolutely hilarious. I agree with you.
Love the new video. My pet peeve, when a newbie informs me I’m not making my lather correctly. Huh?! I’ve only been using a brush since the mid seventies! My lather works for me. lol. I don’t mind newbies asking questions… like what’s the best or sharpest blade. Always hear that one. But hey, they’re newbies, I get it. And yep, I tell them use dawn soap and a toothbrush. BTW I love your cleaning cloths
I do a two pass shave but my neck is sensitive but as long as I don't go for a baby butt smooth finish I don't have any issues. I think my number 6 would be, it is OK to NOT have a baby butt smooth shave. I am going to try the single pass with the grain while buffing.
Thanks for the advice. After a couple rough shaves I tried blade buffing for a 2 pass shave and there was a lot less irritation.
I only use flitz on straight razor restoration projects. Everything else gets dawn power wash. That stuff is awesome!!!
"Don't try to reach the baby butt smoothness! It led to irritation, cutting, bleeding, then crusts and peels on skin, ingrown hairs, etc." - the best advice I've took from old wetshavers ever! And cold water - completely agree, the best results are reached with cold water, not the hot! (Yes, you can wet your hairs to the soft level with cold water and then experience more close shave! Try it out!)
Hey, quick question - when referring to cold water usage, are you talking about before shaving, after shaving, or both? I'm just getting started with DE razor shaving so sry if this is an obvious question ;3
@@zarkydunnun7378 Wetting your hairs before shaving with cold water also gives the softness to your hairs as the hot/warm water as well, as the hairs just simply get wet and soak moisture. But cold water closed your pores on a skin and freeze nerve endings in your skin, so skin became less sensitive. So start shaving with cold water with more care as the skin less sensitive. You can have closer shave with cold water. But afterwards if you apply three passes - you can have an irritation as well, but less in comparison of starting with hot water.
But it hugely depends on your hair and skin type.
Sometimes doing both, applying cold water before and after shave, works best, especially for aggressive blades, like Feather, as skin became less sensitive and more tight and rigid.
And again, there's no need to trying out to reach BBS - two passes more than enough, with the grain and across the grain in optimal, or maybe against the grain if the hairs and blade allow to do that without irrigation and microcuts.
, and also the blade sharpness, mildness, the razor (gap, attack angle), etc.
I was experimenting with many razors and Rockwell 6C and 6S gives the best and consistent results, even with pretty different blades!
So, there're a lot of space for experiments and revealing what's the best working for you.
I've got thick hairs and sensitive skin. Now I'm staring with more or less warm water (warmer water moisturizing hairs just faster) and after finishing with washing down everything with cold water, to close the pores, switch off sensitivity, and decrease irrigation.
Also alunite applying afterwards and good aftershave cream/balm/lotion always counts!
@@AndrewBednoff So essentially the only way to know whether cold or hot water would be more ideal for me to prep my face is to try both and see how it works, right? I was confused at first because I heard different suggestions from different wet shaving YT'ers on what temperature of water is best for preparing your face. From my understanding, hot water softens the beard and opens pores so the razor can glide more smoothly, while cold water closes the pores and tightens the skin to reduce inflammation. Both have differing advantages in terms of reducing the chance of irritation, which is why I wasn't sure which to trust. But anyway I'll just have to give both a try and see what works best for my skin I suppose. Thanks.
@@zarkydunnun7378 Yeah! Right! Try out cold water before and after, several times, to gather experience and feelings. And then try out warm/hot water before and cold water after shaving, to compare results and feel the contrast and difference.
The only way is to try what will work best for you!
Someone swirling their brush on a puck of soap a few times, painting the brush on their face a few times, and calling it lather 😂
Yeah, that gets me, too, lol. Like, you didn't even build anything. That's why I scoop and bowl lather. Much more effective for what I want in my shaving sessions.
My pet peeve is when I try to explain to people they can get a fantastic shave with a DE or single edge razor and they proceed to argue with me that a multi bladed razor is superior! They've been brainwashed by the marketing and refuse to see the light, it really is frustrating. Cheers from Nova Scotia…MikeR. ( p.s. love the restoration job Razor Emporium did on my Gillette Fat Boy😊 came back looking and feeling like a brand new Razor..thanks goes out to the team.)
This is a very practical and helpful video, despite being presented as a handful of pet peeves.
A cold water 2 pass shave is my normal routine. I have no interest in chasing the perfect shave.
Straight razors scare me, mostly because they require maintenance and care that I am not up to speed on. I regard them as a niche tool for a highly experienced shaver with too much time on their hands. ;-)
I spent a fair amount of money at the very start on a Simogue SOC badger brush, and have zero regrets. I may eventually add a synthetic brush to the den, probably a Simpson, but am in no hurry to do so.
A razor blade pack is absolutely critical for a new shaver. IMO, Japanese blades are overpriced luxury items. I have a few tucks, but have never even tried them.
My first few auction bought vintage DE razors were pretty nasty when I got them. I soaked them in dish detergent and water for 2 days to loosen up the gunk, cleaned them up with an old toothbrush and hot soapy water as best I could. Then I ran them throught the dishwasher. They came out really nice. Do NOT forget to disinfect your used razors before you use them. Rubbing alcohol will kill bacteria and viruses. Barbasol will kill these and fungus as well.
I do a three pass shave. I don't do WTG XTG ATG. I got my idea from "method shaving" I do WTG, WTG again for 2nd pass. My final is a half XTG, only 45 degrees off of WTG. This is not a full XTG. This gets me a close shave without problems. Back in my dark (cartridge) days. I did 6 months with a beard, shave 6 months. DE shaving has made shaving enjoyable! I've not had a beard in almost 10 years!
😂. That was me! When I started, the sharpest blade was the best blade! NOT!!! Yes, lose the word sharpest! Oh, it wasn't pretty and I wanted to give up, but I stuck with it. Now it's a Shark, Treet or Lord for me, all of which are in the middle of the sharp chart. Thanks!
Something I find annoying is when I'm told be advertisers or whomever, that wet shaving is cheaper. Cheaper than what? I just love it.
Exactly
My peeve is WHY are all blades longer then the razor head. Blade sticking out of ends of the head can cut you.
So you can grab them and lift them out of the head
There are plenty of razors where the head does cover the tabs... my Henson and a new razor I am waiting on, Yates Merica.
I do have 2 older Gillette TTO razors that don't cover the tabs. They have not been an issue. Just go slower and be careful. 😊
My number six is rinsing a blade with warm water after rinsing it with cold water or vice versa
Hey Matt great video as always. My pet peeve is my wife asking me how many razors do you need? My answer is all of them! I love the hobby and enjoy the whole process of shaving.
The two areas of main focus to put money into should be: razor blade and after shave. There are some razors objectively better than others, but mostly it will come down to what type of blades it can accept. The last one is after shave. I lump alum, rub/balm/lotion and septic stichk into this. Find a combo that works well based on your skin and hair coarse type.
I’ve seen several comments here about three passes for BBS. I do three passes because of how coarse my beard is.
If I want BBS for a particular reason, I treat me DE as a woodworker treats 60 grit sandpaper. Then I have ultra cheap two or three blade cartridge that I do a light pass with, similar to polishing with 1,000+ grit sandpaper.
DE does the down, up, and straight across. The cheapo does a forty-five bottom to opposite top stroke. This is because of the insane way my hair grows around my jaw-ear area.
I do 4-5 passes for a good BBS, on my face anyway. 3 on my neck and it's done.
I’m bummed you lured me here because of the thumbnail in the email with the sweet light blue REX Tshirt and then I get here and it was click bait! 🤣🤣🤣😜
- Brian F
Yup!! Well done, Matt!!
Thank you for posting this video. I have watched your other videos and in one of them, you advised not using Barbicide and to just clean the razor with a toothbrush and dishwashing detergent. That is what I do, now. I feel more connected to my razor as a result. I did get a sampler kit of razor blades long ago, and I learned that I like a certain brand best. I have stayed with that brand, but I still have many blades from the sampler kits. I like to do a 2 pass shave. I have not heard of 'blade buffing' before. I will have to look into doing that. What I like doing best of all is lathering with nice warm shaving cream. I like the feeling of cold water. Given my age, I think I have other goals that are higher priority than a super close shave. Perhaps some day I will try cold water, it gives me goose pimples just thinking about them. What I do fuss about is the razor itself. I want the best razor that I can get spouse permission to buy for myself.
There are so many truly wonderful blades out there. Other people can suggest, but you must decide for yourself.
I've read how wonderful some blades are, but I was unimpressed. I've also been told that blades I really like are trash.
Sample pack is the way to go. Just try stuff.
One of my pet-peeves is after ONE attempt people give up on wet shaving. Sure there's lots of variables and things to try so that's why giving up after one try is so maddening to me. A related one is just mentioning a safety razor people are intimidated or flat out scared by the DE blades - yes, handling them incorrectly can yield a drop or two of blood but I've NEVER been cut (only nicked when shaving too fast) from installing or removing a DE blade.
My pet peeve is there’s always something that I want but no room or no money to get it 😅
Don't plink the edge and don't play Stairway to Heaven.
My pet peave? People who tell me that cartridge razors are the geatest. Sorry, they are kinda flakey things.
My shave is a one pass with a clean up, for the stragglers.
My blade is either a Feather, Kai, Lab Blue, or a Nacet. Because, for me, they have the best results.
I occasionally soak my razors in hot water to remove gunk from them and to sterilize them from use and handling.
Thanks for all the videos, great job!
I buff and STILL need three-plus passes most times to get a good, close shave (yes, I chase BBS - any hint of stubble at the end of a shave drives me nuts!). Wiry beard, I guess. But hey - I enjoy the process, and rarely get nicks or irritation. Though I'd love to be able to get away with fewer passes when I'm in a rush...
I'm not very cognizant about straight razors, so I wouldn't know about plinking the edge (even thought I've seen Matt talk about them). I'm comfortable enough using double-edged razors for what I need and I'm not interested in having to hone and strop razors much. Also, I personally do a 3.5 pass shave because of the type of hair that I have (and I've also done a grain mapping of my face) and how much can be left, but I'm VERY careful with my lathering and technique that I RARELY get a massive level of irritation or bumps unless something is wrong with one of the items I'm using, mostly razor blades which I test every now and then. I've learned a lot through these videos and through TONS of experimentation, so I've never really had to ask a ton of questions like this. Seek the information, and you will find it somewhere.
Well Matt you😢 hit home run with great info.👍
my pet peeve is when i get stupid with handling the razor and nick myself. just annoying as hell when I get clumsy
If I'm running short on time I grab my electric (razor) - if I'm not (short on time) after I lather up I'll say (out loud) "slow down" - amazing how two words avoids getting cut by your own doing ;-)
#6 is: "Which artisan makes the best soap?" and/or "Who makes the slickest soap base?". I want to scream like Matt everytime I see those polls in various groups. Probably because it's such a subjective question and draws out the shills. I have my personal favorites of course, but I always try and be fair, realizing that not everyone is going to like what I like, or even have the same circumstances to replicate my shave experience with the products I enjoy. Wet shavers need to pace themselves and focus more on their own personal enjoyment and skill building vs chasing FOMO.
Number 4 makes for a decent letter opener 😊😅
Tobins_throwbacks You could probably butter your toast with it too.
What, NO BBS. I thought for sure it would have been number one
Do a video tutorial on how not to cut MY chin.
I learned very early on that three passes don’t work for me. Thanks for the vid-I enjoy watching some of the junk “science” I’ve read in forums get debunked.
Thanks for watching!
Planning to stop by when I’m out your way in a few months. Can you show me the sharpest blade you have :). I mean comfortable.
Subjective. Try aggressive pack.
Great video as always!
Can you not use the polishing cloth on solid metals🤷🏼♂️
Yes you can
I just purchased my first straight razor.
I have a couple of knives that i sharpen that I can shave with.
Mick dundee status....
They are 1066 high carbon. Yes There is a tremendous difference in how carbon steel behaves on my sharpening system.
Do i really need to go buy a bunch of wet stones?
I already have a few ceramics, strops and compounds.
Perhaps you can recommend a few that will work?
Check out our honing videos
I guess I would say that it bugs me when folks talk up the feather blade to a point that they have made others fearful of it. It’s just a blade, you can get cut with any of them. I done a Halloween shave one time with a feather blade and Muhle r41 razor. No cuts or anything. Because I paid attention to what I was doing. Also that leads me to another issue lol, people will actually talk about a razor like the r41, oh it’s so aggressive it’s scary? Are we in middle school still?
My pet peeve in the wet shaving world. Seeing people splurge hundreds of dollars on an expensive shave soap collection they won't get to fully use up before they go bad. Like yeah I get it - you love shaving soaps. But man, take it easy. You don't need to spend hundreds for slick soaps and creams. The $15-20 jars of shave soaps work perfectly too and lasts you many months, each!
I agree. I thought part (not all) of this was to stop paying the high prices for cartridges. Are we just going to spend the savings on all the other products instead?
A good way for the soap to not go bad is to do scooping techniques instead of lathering through the tub. I recommend looking at a video by Tobin Fetters on Why I Scoop and it gives good info. on why it is better to be a scooper than a tub latherer, part of which it preserves and saves your soaps from having any issues in the future with bacteria, scent strength, shrinkage, etc.
Great video, Matt!!! Thank you!!
Your polishing clothes are amazing!
Glad you like them!
If i had a goatee i would only need a single pass as well. If you can reccomend a blade/razor combo that can do chin with a single with the grain pass please?
Konsul with permasharp
@@RazorEmporium could you post a video of you shaving your goatee region in a single pass with it
You are spot on
I like a three pass shave and enjoy the time I spend shaving. My pet peeve is people who need 3/4 of an inch of shaving cream for a blade that is .0087 mm thick.
I hear ya. But sometimes you need that much lather to not have something dry under it all
@@RazorEmporium I tend to have a wet lather. I like it wet and slick. 🙂
#6- Super expensive brushes. Turning handles is an art and I definitely support artisan quality as well as the price on quality animal hair, but to act as if it’s “necessary”, not so much
I think it’s cute when DE guys talk about how “aggressive” their safety razors are.
Do not leave your razor in Barbicide for long periods of time.
Pet peeves:
1. When someone says they can't use a Tech or Super Speed because they're "too mild." As if their stubble is way different than the father/grandfather they inherited it from.
3. Seasonal scents
4. Not putting razor blades in Halloween candy. We've heard about it for years, and finally have a chance to make it happen, but noooooo, we hand out "fun sized" candy bars with no razor blades.
5. People skipping #2 as if people won't notice.
Lol 😂
After I brush with dish soap, I lightly polish with Bar Keeper's Friend. I've looked and paid close attention and I haven't seen any plating go away.
Anyway, I always give this advice about blades: There is no best blade. The best blade is the one that works for you. That being said, there are such things as low quality and high quality blades. Everyone is different on blades. Take the Astra Green. A blade that is widely used and most people like them. However, not all people like them. Same blade, different face. You have to try everything.
My pet peeve is new people that don't want people to think they're new, so they'll show off some product or advice that is beginner advice, but they learned the lingo, so it sounds like an established shaver. These are the people that refuse to admit they're wrong and when you're trying to correct them, they get argumentative and go all in on it.
Hats off to me!
Matt, what’s the (best) razor plating or material, stainless steel or rhodium or chrome?
Stainless
I love my rhodium plated stainless Ambassador. It’s the best razor I’ve ever used.
Spray bottles are my pet peeve lol
Is there a stainless steel straight razor and who makes them
Dovo does.
Number 6 : "I'm just going to heat the blade"....(Quick three second swoosh about in the sink)
My absolute biggest pet peeves are when snobs say that this is a "Beginners Razor or Beginners Razor Blades." Just so damb elitist!!!!
I have over 60 vintage and modern razors in my collection, several costing $70 - $120. I swear, soooo many of my $35 and under razors shave just as well, even better, than the expensive ones: Merkur 34 HD, 1904, 23c, Edwin Jagger, Rapira Tech ($10), Parker 78r, and several RazoRock razors! Do not let price fool you! Right now I am loving Gillette Wilkinson Blades made in India. The are under $8 for 100. Feathers are $40 + for 100. The Gillette Willkinson give me one less shave per blade but are way better in comfort and do the job great!
I’ve never understood 3 pass shaving. You get the job done in one, and if you have stragglers, massage the leftover soap on your face with water and gently go over it. It will be a smooth shave, I promise you.
#6 super expensive sharpening stones, then people say my razor will not sharpen, I got a $500 Jnat & it don't work.
There is a lot of skill required to set the bevel & hone a razor.
It can't be done like sharpening a woodchucks pocket knife.
💯💯💯💯
The perfect razor for everything and 3 passes. Nah! I have had great results with a more aggressive razor with the grain and a gold Tech against the grain. Easy, comfortable, consistent and fun.
Thanks for sharing!
Thanks Matt 😂🙏
People who make objective statements about the myriad subjective things in wet shaving.
YMMV but that only applies to blades other than my personal favorites, Titanic Superior Platinumchrometetrafluoroethylene!
Hey Matt excellent video as always. I would love to win the Razor Emporium shirt so my pet peeve is that every time I buy a new razor my wife asks me how many razors do I need. My answer is all of them lol. I love trying new razors,blades,brushes and soaps as do probably most of us!
Here, here!
My pet peeve is people wasting shaving soap because they watched a RUclips channel that tries to sell as many soaps as possible. "Look at how rich, thick, and big my lather is!"
Cool story
Got to admit, I am a member of the 3 pass cult, and get quite a bit bloody every time. Should go for 2 I suppose, with cold water haha
I stated in my own comment, I have been three pass shaving since my military days. I ripped my face up with cartridges, but with DE wet shaving, I learned to let the weight of the razor do the work, now I don’t have the ripped up face issue anymore.
My issue may not be the same with you, or you may not have noticed yourself doing this. If you haven’t paid particular attention to pressure, consciously monitor how much pressure you’re applying next time.
Do the 2 pass or even just the one pass. Your face will love you and you will make more gains faster
Excellent Matt👍👍 Pet Peeves.. everybody has them and they remain a PITA because they never go away, always rearing their ugly head when least expected. I know this video was about wet shaving specifically but pet peeves run the gambit in life. If only there was an answer to elimination.....
The Henson advertising campaign... my biggest pet peeve in the de shaving world.
Their campaign is what took me down the rabbit hole and got me to put away the electric razor.
@brianzionts-bernstein8609 I'm happy for you, and hopeful you've had the pleasure of experiencing some different de razors since. The Henson performed fine for me I guess, but was nothing to write home about IMO. It not rocket science, and they've not developed anything new, other than the general appearance of the thing... contrary to what they'd like to claim.
Henson does market rather aggressively and can get annoying. However,it was their commercials on Facebook etc. that got me interested in DE shaving (even if I bought a Game Changer for my first razor instead). So I guess I am grateful.
My biggest pet peeve is people buying all their shave supplies off Amazon. I get that it's easy. But why not support small business and actual people that support and care about shaving? I'm not saying that I never use Amazon. But it's always a last resort. I will always support the person passionate about their business first over some giant internet magnate.
Agreed thank you 🙏