How to Install a Bed Slide
HTML-код
- Опубликовано: 18 окт 2024
- Today we will be showing you how to install the 1500 CG bedslide. First step is to install the cleats on the sides. Next loosen up the two boards so you can fit in the end rail and insert the end rail in between the two boards. Then loosen the bolts on the left and right side underneath the clean holders and insert the rails on each side. Insert the bolts and tighten down to fasten the rails. Tighten the side rails to the end rail while using an allen wrench and then tighten down all of the bolts underneath the end rail. Once it’s assembled place it inside the bed of the truck, drill pilot holes through the rails and into the bed of the truck. Then slide the bed slide back a little bit and drill all the way through for the holes. Then insert the anchor and use a bolt to fasten down the anchors. The anchors go on all 4 corners. Once that's done you need all you need to do is insert the bolts into the anchors and tighten it down. Once the frame is fastened down to the anchors and it’s anchored down to the bed you're all set. Test the bed slide to make sure it doesn't hit on any spots inside the bed. Then you're all ready for the road! Thanks for watching and remember when your truck looks good, you look good!
What kind of anchors are u installing? My bed rat says it needs “blind fasteners” and i have no idea how to install them
Gee....I would have washed the truck a just a little bit before installing the bed slide.
Where can we send your refund?
What size anchors you using?
at 1:32 dude on the left looks up like he's watching for the owner of the truck.....Yea, man....we totally just drilled holes all the way through your truck bed dude.
How do you adjust the play from side to side.
Estimado colega me gustaría saber si usted podría proporcionar un dibujo de su grúa para motos. me encanta montar una pero no tengo idea.