Block off the recirc valve and the vac line that goes to the top and it should flutter, assuming you have a cone filter fitted :) Just so you know they car won’t run just as smooth low down in the RPM like this though
@@Morgansmith-sq6fr nah turbo flutter is fine mate, the misconception is the noise comes from the turbo stopping spinning and vibrating back and fourth making the noise, but it can’t happen it’s spinning to fast the noise is just the air being forced past the blades as it’s still spinning the way it was :)
@@sonpismanlikfaydavermez the dumpvalve is acting as a blocking plate because I’ve disconnected the line that opens and closes the dump valve.. thus.. flutter
Yes I’ve tried to block the vac line by zipping it on itself. After this there is still no turbo flutter, may be due to the stock air box but idk how to mount a cone filter / choose wich size fit on the tube .
Just a cheap blow of valve from eBay, had that on for a bit but thought would would happen if I plugged the vac line that actuates the valve by looping it back on itself then using a ziptie.. thus it made the stututu
😍😍😍 I need this for my daily Clio 3 Grandtour
Block off the recirc valve and the vac line that goes to the top and it should flutter, assuming you have a cone filter fitted :)
Just so you know they car won’t run just as smooth low down in the RPM like this though
@@AG-tv6sh it will damage turbo on it tho won’t it ?
@@Morgansmith-sq6fr nah turbo flutter is fine mate, the misconception is the noise comes from the turbo stopping spinning and vibrating back and fourth making the noise, but it can’t happen it’s spinning to fast the noise is just the air being forced past the blades as it’s still spinning the way it was :)
@@AG-tv6sh what mods bro?
@@joshuacrichton4622 engine swap g
Can you link the parts you bought
Which cone filter do you use?
can i do it on fully stock motor?
The only things that aren’t stock on this motor wise is a recirc valve delete and cone filter install
What dump valve is it ?
@@braydenadams2287 just an Amazon one unbranded, it’s blocked off though that’s why it’s fluttering
@@AG-tv6sh wdym with blocked off?
@@sonpismanlikfaydavermez the dumpvalve is acting as a blocking plate because I’ve disconnected the line that opens and closes the dump valve.. thus.. flutter
Bro can you make a really quick video to show how you’ve done it ?
Will do soon
Nice ! Waiting for it .
@@slxxn5833 sorry mate just on holiday atm haha
@@slxxn5833 it’s really simple, just block off the vac line going to the top of your recirc valve and with a cone filter it should flutter
Yes I’ve tried to block the vac line by zipping it on itself. After this there is still no turbo flutter, may be due to the stock air box but idk how to mount a cone filter / choose wich size fit on the tube .
I have the same car that you made sound like that
What's fuel mpg like if you drive this slow
Normal just putting about I get around 40MPG but seen other people with better looked after 1.2tces get a bit more
Can you send me link from this blow off valve ?
What did you use to block off valve?
Just a cheap blow of valve from eBay, had that on for a bit but thought would would happen if I plugged the vac line that actuates the valve by looping it back on itself then using a ziptie.. thus it made the stututu
howwww tf
Gonna upload a video tomorrow showing how