Diy 3.7v to 400kv high voltage transformer
HTML-код
- Опубликовано: 5 сен 2021
- Homemade high voltage transformer.
If you like this video, then please like, share, comment and don't forget to subscribe.
#tech_ideas
#plasma_transformer
Music provided by Argofox:
A Himitsu - Adventures
• A Himitsu - Adventures... - Наука
Thanks! Clear instructions and materials needed, something that uncounted other videos have failed to do.
Actually, it's less than 10 kV, but it was a relaxing video, thanks! One of my friends used to test my high voltage (low current) generator by making an arc with his finger and said: "ok, now you have 20 kV, it's better than yesterday". Don't try it unless you are sure that the current intensity is low.
ححح
also should be high frequency or it will shock the life out of you
Projeto de beleza 👍👍👍👍👏👏👏 saudações de
4kv. If it was 400kv your arcs would by crazy huge!
Not only that at 400kv the high voltage windings arc each other and destroyed itself
aeagj a
hello keem
@@auvkso wait yoyef, why is in recoomendedened
bizz (funny/weird)
Nice video, thanks for sharing :)
Awasome experiment
Mast hai bhai....!!! 👍👍👍
Presente: Cordial Saludo; Desde. Zapopan, Jalisco, Mx. Siempre fiel y Pendiente.
I love the way it sings
فكرة جميلة وفيديو وشرح روعة احسنت Nice idea and a Video and a wonderful explanation well done
Interesting and intelligent idea to make dc to ac high voltage circuit. Gift.💯🧡💝🌻🌼🍀💖🌹✌🎁👍
This project is very good!
yes so good for foolish people .
Great channel!
Nice idea
Very nice experiment. Greetings from Germany.
Brother super high voltage moudle circuit 4k super
Oh brother it worked very well thanks alot thanks very much
Meine it's not can ya help me
400 kv wrong and imposible with this insulation,it may be 2kv
True
That's around 5kv i guess
It looks like 5 to 10 thousand volts
It would be 10 kv max, the amount of electrostatic is monster by distance
Can someone explain to me how did the transformer work with DC input? I thought transformers only take AC input
I love it good
Keep uploading videos llike this
Excelente vídeo
Cool project
Hello, you said 400 kV? !! Are you kidding? If the output was 400KV, your spark would be 10 cm, which means that when the wires reach a distance of about 10 cm, it will ignite, and the other point is that you can still not touch the wire even though the wires are shielded. Because with that voltage, 400 kV, high voltage passes through the wires and reaches you. Another thing is that, after winding the transformer, you should fix its wires with epoxy resin so as not to cause sparks between the wires inside the transformer, otherwise your transformer will burnout soon, please pay attention to these details.
This project is possible or not..
@@1minu.Entertainment ye it is lookin funky. It might work. Idk
@@cuf_ ok
I think low amper
@@1minu.Entertainment it is working, i don't say that this high voltage not working , but unfortunately Only these transformator can not holding a lot of voltagh pressure, for example, the electric current connection button Press continuously , or at one pressure of the current connection button, for example,spend more than 5 seconds, then due to poor insulation between coil wires, small sparks make your transformator burning.I think for better coil, use the high voltage of old light bulb TV'SĎmonitors, you will get a better answer.
excellent lighter I need this
I like this project
Good idea
This channel has exposed so many gimmicks used to dazzle people. This reminds me of those lighters that work in this fashion.
Super invanseon
Nice
Video rất hữu ích
Kereenn
Wonderful experiment...
If it was 400kV, your arc would be able to jump 40cm. You’re off by a factor of about 40.
Rather it is like 2-4 kV....
the arc wouldn't hurt its over 70khz
@@mr.engineear0987 but it would burn you. 70kHz are not necessary to not feel the current, just ~25kHz.
By the turn ration and input voltage the secondary voltage is about 555 Volts. Thats not even enough to make a 1mm arc which requires 3000 Volts. So the high voltage arcs must be coming from some resonant effect.
Nerds
❤❤ cool
Hello, very good. The lamp can be turned on؟
Pn junction transistors used to increase voltage and magnetic field in the coils
Nice 👏👏👏👏👍👍👍👍👍👍
Can I use alternate transistor
التجربه التى صنعتها ربما تكون مفيده فى مجالات قد يستفيد منها الانسان ولكنها غير مفيده بالنسبه للبسطاء حيث ان الناس يريدون 220 فولت بتردد 60 هيرتز لكى يشغلو بيوتهم فأرجو منك الاستمرار فى العلم واشد على يديك واقول لك شكرا على هذا الاثراء العلمى المفيد وشكرا..فتاح
We xan use it like generator na bhai
Can I use 13003 transistor
Can i use 5 volts input? Will It still work?
Its works to Phone charge transformator?
Where did you get the IRFZ44N MOSFET transistor from
This IA real I will try and a successful my project
Judging by the distance between the two secondary wires, the voltage produced is somewhere between 5kV and 7Kv.
If it was really 400kV, the transformer would be BIG or else will burst on flames damaging the MOSFET and the battery.
produced somewhere 10kv And 0.500MA
ferrite transformers punch way above their weight
where can i find the ferrite core he was using?
Can I use 13003btransistor?
Can use resistor 1k
I’m kind of dumb, so if you could help affirm this to me, that would be amazing. I think I know how this works but I’m not 100% sure. I think what happens is that when current goes is applied, some current goes to the gate. But when more and more current goes through the collector because there is a path to ground. When less current goes through the base pin, it closes a bit. When it closes, less current is going to ground, but more is going to the base pin, so it reopens. This creates a pulsating signal.
Keep in mind this is a guess, I would appreciate an answer/explanation as to how this works if I’m incorrect. Thank you!
I'm kinda dumb as well but what i think is happening is that the circuit initially sends a signal into the primary coil which induces a current in the feedback coil and the primary starts oscillating at the resonant frequency of the transformer
where can i find the core and bobbin?
What if I change resistor value
is it too thick?
Can iuse a 2 .4mh transformer or 220w to 12w transformer
O tal projeto, mencionando ser de 400 KV, em si, não corresponde a medição real, pois para cada 10 mm ou 1 centimentro de Arco eletrico formado corresponde aproximadamente a 10 KV, portanto, sub entendendo visualmente no video apresentado pelo tamanho do arco gerado é em de 10 KV, sendo irreal o apontamento de 400kv... Mas, contudo é importante ter-se noção fundamental de como montar um gerador de alta voltagem com materiais acessíveis reutilizaveis....
colocando em uma raquete mata moscas, será que incrementaria ainda mais o circuito???
@@amiltoncosta6130 What Is Islam?
Islam is not just another religion.
It is the same message preached by Moses, Jesus and Abraham.
Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
It reminds us that since God created us, no one should be worshipped except God alone.
It also teaches that God is nothing like a human being or like anything that we can imagine.
The concept of God is summarized in the Quran as:
{ “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)
Becoming a Muslim is not turning your back to Jesus.
Rather it’s going back to the original teachings of Jesus and obeying him
Hello I already have a mini transformer in my home will that work or I have to make one
From where should I get the transformer?
Your project is successful work 🎉 but resistance is very 🔥heated
Brother output is AC or DC.. what's output create spark..
Interesante, pero no son 400kv en realidad parecen mas 8kv
Porreiro pá.😁
There is any effect if the winding overlaps without sequence
Because winding of secondary takes a lot time by hand if done in sequence
No no need to.
How many turn given
Hello Band master
Это были десятивольтовые киловольты! 😀😀😀
I made this circuit exactly same way but got output of not more than 500 volt, it cannot shock me either...
Pode ser o GS 606
D13007M?
And where did you get the resistor and the transistor
Just look on that beauty spark which appears if i just give signal calling from another part of world to the device which will be sunked in LPG
hey i made high voltage transformer without using to much tape.All i did was kept wrapping it with thin copper wire until its full then made the input wire.
I didnt add extra layers of tape to wrap it i just keeping wrapping it.try it.
Did it work ??
@@pulliexpress4191 yep
But it has very weak power, much much less than that mosfet
@@user-xx6dj9zj3h thats why i use mutiple high power mosfets
Use kaha kare
Its 120 to 1 transformer, so there is no way to output 400KV. Probably is 1KV with fully charged litium battery. Anyway, its nice and simple circuit.
Actually, I built it! It is 12 - 15KV
It should make an arc 40 cm long. What's wrong with it?
Bikinin gambar sekemaya dong
Atleast i tried...
Anyone know if the IRF522 would work? I have a bunch of those and trying to avoid buying anything. I have a couple transformers out of printer power supplies that i have seen videos of them being used. I have 1.2k resistors but at 3 watts.
It should work
indeed high voltage but very low current.
Bro I have done same as you show in your video but it doesn't work what should be the reason?
please i think the results are cool cause its slightly different
What happens if you take a 100 ohm resistor?
يا سوف تحرق الموسفت او لن يعمل
Where did you get the small and thin wires?
relay
Can we use induction cooker transistor
Just make a simple oscillator whit any transistor
NICE NICE
Feed that into a voltage multiplier
Can I swap that transformer with a flyback transformer? If I wire the Primary and one Secondary to the output of this circuit? please let me know. I am trying to do this for myself but don't have the right transformer.
SOMEONE JUST LIKED MY COMMENT NO ONE HELPED!!! 😢😢
@@milespeterson5049ý bạn là biến áp sắt?
Yes, a flyback transformer an iron core. Do you think it would work?@@taptapgaming167
i had used to first music u used and i got copyright claim😥
🥰
Could we can use 12v battery???
yes more input = more output but be creful
Hii thanks for this i made two working transformers...but is it possible to make one with a microwave fan??
Becuase i removed the motor and added wire and connect it but i dont have enough volts to try it..can u see if it will work??Please?
It may dont runn, use new lucky wire
@@amirmaleki4544 It works i used a relay
🥰🥰🥰👍👍👍👍👍👍
Audio bass boosted
8TUrns ?
Resistance colour cod se1.5k ka he
and flyback tv can be launched in this way
Hi there, I have a question that I think the DC current goes through the transitor is still the DC current so how can it create variable magnetic field ?
Here it's pulsed dc
@@TechIdeasAG thank you so much
@@TechIdeasAG How many kv does the police's electric shock stick have? I really want to make an electric shock gang with a higher voltage than the police, but all I buy online in my country are Lubiao, and the discharge time does not exceed 6 seconds. If it exceeds 6 seconds, it is easy to burn out high voltage generator
Hi the transistor is working as a switching transistor so it transformed from DC to AC current .
Skemanya om
I bet that is 6kv high frequency arcs
where can i find the ferrite core used in this video?
im guessing from a small transformer probably salvaged
Sir copper wire 0.50mm, SWG please
10x30 layers means ? How many total turns would be on secondary?
10 layers and every single layer has 30 turns, so total turns = 300 turns
It can't give any affective shock due to low amperage
Who is switching
Plz tell