I believe the title is confusing. The moulding sand is a mixture of sharp sand and a small amount of liquid sodium silicate (= waterglass). Sodium silicate hardens due a reaction with CO2. This is what you see in the video. The former puts the sodium silicate /sand mixture into the mould, and compacts with a wooden stick. Than he injects CO2 as a reaction agent. The mould is now a very good relatively hard mass. So the mould is not of silica/ CO2 but instead made of sand with a sodium silicate binder.
These men are incredible making cast iron with basic tools, hard work and a lot of skill. I like the way they look quite relaxed while working but someone is always will to jump in and help someone else lift or carry. They’re a great team and that can make hard work a lot easier. Well done. 👍👍👍. Cheers Stuart 🇦🇺
@@nektariosattitis3841 read the 4 gospels first & don’t repeat like a Parrot what you heard in the church , Jesus never said iam god or worshiping me, and about ( son of god ) he said that the ( peace makers are the sons of god ) .
These people obviously work very hard and they deserve our respect. However, this is 18th century work environment and there is nothing amazing about it.
@@чегевара-б1е учитывая что там все делом заняты они больше на вторую походят, Китай первый, все остальное финансовые пузыри. Ну а наш СССР откатился на сотое место видимо.
@@PANZER1233000 у нас такой кустарки нет .Одну чашку или тарелку делает человек пять .И стоит она копейки .Потому они и работают все то лёжа то сидя босиком .Не соблюдая правил техники безопасности .Посмотри сколько гибнет народу в Аланге где утилизируют корабли со всего света .Посмотри на трущебы индийские и посмотри сколько заняты делом .Россия строит атомные корабли и атомные станции .А не на коленке собирать всякую фигню .
with proper machinery means some of them would lose their job. almost all the processes in the video can be replaced by machines, only 1 or 2 staffs are needed here to control the machines.
Im not sure if i should take it as joke or insult. They may work bare feet but it only proves 'civilised' countries care about safety because their citizens are stupid enough to hurt themselves this way. Here on the other hand... you got skilled workers who dont really care about basic rules of life (dont hurt yourself) because they know how not to be an idiot...
Some countries are so corrupt and occupied by other countries, so they tend to be too poor to purchase safety equipment. Something you wouldn't understand obviously.
@@lockupl Even if you are "not an idiot..." accidents can happen - unexpected circumstances you are not aware of, others actions, flawed materials or components etc. You don't have to be idiot to have accident! That's why you take Smart precautions, & safety equipment, Being properly prepared is how you avoid "being an idiot.."
@@pp-jh4ig just because they enjoy doing it, doesn't mean it doesn't earn respect. They probably do enjoy it, there crafting cool stuff with there hands. Either way, I respect these guys, but still couldn't imagine working in a foundry
Very hard working less fortunate people can not efford safety gears and that should not stop them from making an honest everyday living. I am really proud of their work of ingenuity! Thank you for sharing your knowledge and skill.
Folks, it's obvious they aren't wearing safety equipment. It's a completely different culture with different thoughts and ideas of what is safe. Watch, enjoy and respect their culture for what it is.
А скорее всего БУДЕТ ТО, ЧТО УЖЕ , ВИДАТЬ, БЫЛО РАЗОК- нынешние продвинутые страны , в случае войны , похерачат друг друга, задевая всех , выжившие не умея ЖИТЬ, будут жить в пещерах, а Цивилизации будут там, где процветают примитивные производства, как эти.
I respect every body who's made comets abouts sandal and them safety, but remember we are lucky to living different circumstances for them safety gear costs them 2 months wage and they have to feed them family as well.
Когда-то, на обувной фабрике, шили сапоги кирзовые - с металлическими носами и пятками... Говорили, для маталлургов, а оказывается, для гопников... Ведь металлурги себя и в сланцах неплохо чувствуют 😀😀😀
@drew michael......you go ahead and ass air pockets to your iron casting and see what happens ....don't burn yourself to bad ......if your needing technical explanation do some reading
@drew michael if you use air compressed air you adding oxygen which causes flare ups when poring you molten metal . Co2 does the opposite it pulls the molten metals to the mold . Oxygen burn c02 dosent
Если кто не понял это полноценный металлургический завод - цех шихтоподготовки, сталеплавильный цех, формовочный цех... Даже мастер в синем халате присутствует!
I hope those are safety toed sandals! Centuries of doing things the dangerous way...But, they are amazingly resilient and HARD working...Some of those tools, fixtures and molds are decades old!
Absolutely amazing, such hardworking individuals making brilliant stuff using simple techniques, instead of million bucks machinery. More power to them. 👍
Где то в офисе, под сплитухой в углу, тихо радуется чей-то родственник или бездарь продвинутый на руководящий пост дабы продолжать медленно но верно уничтожать таланты, производство и индустрию страны где родился, в угоду "силам" кто видит будущее твоей страны именно в таком недоразвитом примитивизме и в рабстве за гроши.
I looked at the complete video and I am supposed to comment that the workers are the ones who deserve appreciation and respect because they are the success of this workshop.
It’s mesmerising. I’ve never seen such brilliant team work. They work hard and look totally chilled. I don’t see many in the west these days with that attitude. I’m full of admiration for them.
@@КонстантинПономарёв-ж9н ну сталин закупил станки и оборудование на костях ваших прадедов у западной цивилизации. А потом пришел ельцинопутин и вы сдали все это в металлолом китаю, а сами кормитесь с бензоколонки 🤣
I spent almost 14 years in a foundry making huge castings (for steam turbines) weighing several tons. I doubt you will find a 'tidy' foundry anywhere. One thing that made me wince was the guy with the sledge hammer at the end, knocking the hardened sand off the casting. IT'S CAST IRON MATE.
Its like a glimpse back in time to pre-middle ages. All the bare feet working around molten steel. And the guy jumping on the mold, packing down the sand with his bare feet. Working with crucibles of molten iron without any personal safety equipment, pure hilarity. Next time OSHA shows up at your workplace breaking balls, break out this video and say "hardhats? Eye protection? covered up bare skin? Footwear? Aint nobody got time for that!"
A typical small foundry in Pakistan No pyrometer No PPEs No electric cranes No technical staff No Engineers Still these hardworking laborers are working under harsh conditions and producing high-class products.
You will find out why doing something with your own hands is so amazing 30-40 years from now when robots and AI completely replace humans. Imagine a robot doing all the staff for you - cooking, manufacturing, transportation, cleaning, wiping your butt, thinking instead of you.. And now imagine what would be your purpose in life if you don't need to do anything, all day, everyday - you have a robot to do you it for you, right? Yeah, you can enjoy your life, hang out with friends, travel, explore the world and... feel useless. I hope I am wrong.
These sand crabs as they used to be called in the US are remarkable. It's amazing how any one of them could lose a foot or burn an arm in an instant if they stumbled or made a wrong move. Iron melts at 2800 degrees F. - No eye protection, no hard toed boots, no leather gloves, Nothing! God bless these workers. 😬
@@deepaksteaphen8030 That's not true, these people doesn't move anything forward, other people only exploit them for cheap labor, these workers should care for their health, their government doesn't give a shit apparently.
@@deepaksteaphen8030 what kind of logic is this lol intellectual work is equally important a teacher or a doctor does not do hard work but they are doing smart work
My first two weeks of working in a foundry I lost 40# due to the heat. The temperature outside was almost zero degrees. Hard to escape 2800 degree heat from our furnace
They are just pure God Gifted people, they can manufacture modern industrial things, with thousand year old basic hand tools, and techniques. 99% of these skilled technicians never went to any formal schooling, just learning on the job. This kind of natural talent I only seen in Pakistan.
Very sad that factories in the third world, nobody wears any safety equipment, among the smoke, the dust, the light of the molten metal, and the danger by heat I do not believe that none will arrive old with much health. On the other hand, it is incredible how with few resources it is possible to manufacture parts with such quality.
After WW3 these guys will get the world moving again. They waste nothing and fix and repair everything. It's easy for us to mock them from our comfortable and controlled surroundings. Love respect and good health from Scotland UK
Тех кто считает, что это литейка 15 века вынужден огорчить. Данные технологии используют и у нас на одном из крупнейших заводов оборонки в центральной части страны. Обусловлено это лишь тем, что некоторые детали экомически целесообразно выпускать именно таким способом. Для более сложных и точных деталей формы делают ЧПУшные станки методом послойного спекания. Нужно быть просто идиотом чтобы делать форму для оливки канализационного люка или гусянки трактора на ЧПУ.
I'm not sure if I should be impressed at the amount of work and the heft of these guy's balls to do all this and in sandals no less....or upset if they are forced to do so because of the state of things.
Good to see such videos. @ Wow things, please include in your introduction that these are Hard Working, Pakistani gentlemen, This would help promote the industrious nature of general Pakistani people in the World and maybe who knows, Top World Industrial Companies choose Pakistan to build their factories, hopefully, God Willing. I am a Pakistani American and I have seen such hard working people back home in Pakistan.
Охренеть! Техника безопасности на уровне средневековья. Резиновые тапочки на босу ногу в литейке, нет даже элементарных очков и перчаток... Папуасы, что с них взять.
да уж, вот это технологии, вот это жесть, но но тем не менее. для справедливости следует отметить что индия представлена всем спектром технологических укладов которые умещаются в одной стране, от древних паровых машин, до современных станков английскго производства 50тых годов прошлого века(Криосан делал экскурсию в этом году по индийской частной лавочке, интересно взглянуть), до производства локального истребителей и космических ракет.
Я вообще в шоке с их менталитета,никакой ТБ,льют босиком,работаю голыми руками без СИЗ,в каких то национальных одеждах с торчащими тряпками,хоть и руки золотые,но культура труда ниже плинтуса просто....
@@saadhasan2300 They dont need to be steel toe safety boots, they should at least be something with a closed toe so that their feet isn't the first thing that hot steel hits if it should ever rain on them.
I worked in an iron-casting factory when I was 15. I'm astonished that these gentlemen work without safety gear, or even shoes. No denying they're hard workers, but, geez, somebody donate some steel-capped boots to these guys :-)
Shit man! You put one these guys in hard shoes or boots they'd kill themselves tripping on a shadow of a crack! Be more dangerous for these cats than the flip flops!!
@@tomcline5631 While I agree with you, somewhat, the fact is that they can take some time to get used to safety gear. Without it, every injury has a chance of catastrophic outcomes. I do get your point though.
I believe the title is confusing. The moulding sand is a mixture of sharp sand and a small amount of liquid sodium silicate (= waterglass). Sodium silicate hardens due a reaction with CO2. This is what you see in the video. The former puts the sodium silicate /sand mixture into the mould, and compacts with a wooden stick. Than he injects CO2 as a reaction agent. The mould is now a very good relatively hard mass.
So the mould is not of silica/ CO2 but instead made of sand with a sodium silicate binder.
Yeah your paragraph long explanation would've looked alot better haha
Mold the mold.
Tq... Barakallah..
Tyler c just because you have the attention span of a gnat doesn’t mean the rest of us aren’t interested in learning something new lol...
Even if one gives knowledge to others they don’t respect them back.
These men are incredible making cast iron with basic tools, hard work and a lot of skill. I like the way they look quite relaxed while working but someone is always will to jump in and help someone else lift or carry. They’re a great team and that can make hard work a lot easier.
Well done. 👍👍👍. Cheers Stuart 🇦🇺
Thank you very much!
It's great for them working hard!
RUclips channel ko subscribe karo, ☞flash 7star
@@WowThings Your are doing a very well things to show us video
I am happy that they all wearing their safety-sandals when they are casting the iron.
How could u
They don't believe in safety gears
They are so hot ;)
Think safety,think sandals 🥴
😂😂😂😂😂
Jesus I’m exhausted just watching this for a few minutes. Imagine doing this all day, every day. Props to these guys.
Jesus never said ( I am god ) or ( worship me ) !!!
@@الثعلبالمكار-ل3ب read the bible first and don't repeat like parrot what u heard. JESUS IS GOD AND SON OF GOD
With 40°c in summer...
@@nektariosattitis3841 read the 4 gospels first & don’t repeat like a Parrot what you heard in the church , Jesus never said iam god or worshiping me, and about ( son of god ) he said that the ( peace makers are the sons of god ) .
@@الثعلبالمكار-ل3ب stop believing in some old books and suddenly your country will make a transition into a modern and free country.
رجال أصلب من الحديد Men stronger than iron God bless every diligent Greetings from Alexandria - Egypt
Как формовщик работает...завораживающее зрелище!!! Ниодного лишнего движения.Мастер!!!!!!!!!!!
I feel great admiration for these guys! Respect!!
These people obviously work very hard and they deserve our respect.
However, this is 18th century work environment and there is nothing amazing about it.
No matter what career, class, religion, or culture you belong to, the true workers are so beautiful!
Я в шоке!!! Босиком в литейной цехе, подручными средствами делать вещи! ☺👍
Пятая экономика мира по ВВП .А люди в каменном веке работают .Парадокс .
@@чегевара-б1е учитывая что там все делом заняты они больше на вторую походят, Китай первый, все остальное финансовые пузыри. Ну а наш СССР откатился на сотое место видимо.
@@PANZER1233000 учитывая что там нищета полная антисанитария полный трындец .Все делом заняты кустарным ахаха на первом месте по болезням .
@@PANZER1233000 у нас такой кустарки нет .Одну чашку или тарелку делает человек пять .И стоит она копейки .Потому они и работают все то лёжа то сидя босиком .Не соблюдая правил техники безопасности .Посмотри сколько гибнет народу в Аланге где утилизируют корабли со всего света .Посмотри на трущебы индийские и посмотри сколько заняты делом .Россия строит атомные корабли и атомные станции .А не на коленке собирать всякую фигню .
@@чегевара-б1е ты вообще видел как люди литьё в металлургических цехах обрабатывают? То же самое, что и на видео, только в обуви и рукавицах.
Excellent, a big hug from Argentina to those artisans of the iron foundry !!!
Geez, these man are working really hard. Imagine them with proper machinery.
with proper machinery means some of them would lose their job. almost all the processes in the video can be replaced by machines, only 1 or 2 staffs are needed here to control the machines.
At least some of these guys have their safety sandals on.
What a difference in mindset..
Im not sure if i should take it as joke or insult. They may work bare feet but it only proves 'civilised' countries care about safety because their citizens are stupid enough to hurt themselves this way. Here on the other hand... you got skilled workers who dont really care about basic rules of life (dont hurt yourself) because they know how not to be an idiot...
Some countries are so corrupt and occupied by other countries, so they tend to be too poor to purchase safety equipment. Something you wouldn't understand obviously.
@@lockupl Even if you are "not an idiot..." accidents can happen - unexpected circumstances you are not aware of, others actions, flawed materials or components etc. You don't have to be idiot to have accident! That's why you take Smart precautions, & safety equipment, Being properly prepared is how you avoid "being an idiot.."
@@MrStevos it’s not your concern really is it !
Team work, skill and hard hard work. Thank you Bert Safor for explaining what I was watching. These men are to be admired .
Much appreciated
Pakistan land of believers and kind hard workers. Love to all my Pakistani brothers ❤❤❤ from Saudi Arabia
True !
Amazing. Flip-flops with protective foundry jackets... Nothing can go wrong! Well done.
It's OK they are safety flipflops 😄
@@krisg822 Sure they are not dumb, and this is why I found weird they are using protective jackets.... :-)
I respect these masters! They earn their living honestly!
RUclips channel ko subscribe karo, ☞flash 7star☜
T
How do you know their not stealing the sand?
Hard working, talented men. I hope their wage reflects a decent living for each and their family. Much respect for all.
I don’t care what part of the world your from. Hard work is hard work is hard work and everyone of these guys are working hard now give them a raise.
Техника безопасности на высоте, особенно занимательны паралоновые тапочки перед горном!
cкоро мы будем у них учится
А теперь пусть офисные работники как они устают в офисе сидеть на жопе😃👍
По технологии АвтоВАЗа работают ))
Что за крышки унитаза они там лепят?
@@AlexMorozov265 Потом еще ноют что интеллектуальная работа и затраты энергии больше чем у физухи... немыслимые интеллектуалы))))
Jesteście niezwykli , życzę Wam dużo sił i zdrowia , ja też ciężko pracuję i wiem jak go potrzeba takim jak Wy . Pozdrowienia z Polski
My hats off to these guys. Some hard working dudes! Couldn't imagine what these guys have to go through.
What exactly makes you think they don't enjoy it?
@@pp-jh4ig just because they enjoy doing it, doesn't mean it doesn't earn respect. They probably do enjoy it, there crafting cool stuff with there hands. Either way, I respect these guys, but still couldn't imagine working in a foundry
@@tylerkrug7719
,
Ya for a piece of bread
And how much they earn. I doubt even about 1k$
Lot of people have never seen men working hard; it happens in every country, every day. They make the world run.
Not seeing a lot of equality here, I bet the local women are spitting feathers at the lack of opportunity for them to work in this endeavour …
Quite hard and hazardous job. This fit workers are incredible.
Very hard working less fortunate people can not efford safety gears and that should not stop them from making an honest everyday living. I am really proud of their work of ingenuity! Thank you for sharing your knowledge and skill.
Working around,and with, molten metal all day long while wearing sandals, let alone BARE FEET is amazing. Much respect for these guys👍🙊.
This is amazing! they are real craftsmen..
Folks, it's obvious they aren't wearing safety equipment. It's a completely different culture with different thoughts and ideas of what is safe. Watch, enjoy and respect their culture for what it is.
It ain’t culture, Their bosses just get away with not having to provide safety and they are too poor to argue.
Hard job, Congratulations!
Till you lose some toes
imagine if these guys had proper tools to do their job their productions would be sold to the world. alhamdulillah proud of you brothers
Если в мире случится конец света, и пропадёт интернет и электричество . Там наверное даже и не заметят )
как не заметят ?? у парня вентилятор встанет !
Больше ничего у них не встанет?
@@ЮсупУспаров-ц4д ох праказник )) ну каждому своё )))
А скорее всего БУДЕТ ТО, ЧТО УЖЕ , ВИДАТЬ, БЫЛО РАЗОК- нынешние продвинутые страны , в случае войны , похерачат друг друга, задевая всех , выжившие не умея ЖИТЬ, будут жить в пещерах, а Цивилизации будут там, где процветают примитивные производства, как эти.
Пот градом льется , зато кусок хлеба праведный !!! ЭЙ ВЫ ТАМ НАВЕРХУ .....РАСЧИТАЙТЕСЬ С РАБОТНИКАМИ ПОКА НЕ ВЫСОХ ЕГО ПОТ
I respect every body who's made comets abouts sandal and them safety, but remember we are lucky to living different circumstances for them safety gear costs them 2 months wage and they have to feed them family as well.
i notice they all have cell phones.
@TheOtherWhiteBread0 ...funny!
they sold the sport shoes to occidentals
@@numeprenume512 ...Occidentals! Wow! The last person I heard use that word was, well, it was me.
if they have an accident, they may not be getting any more wages. the company should be providing safety gear anyway
Когда-то, на обувной фабрике, шили сапоги кирзовые - с металлическими носами и пятками... Говорили, для маталлургов, а оказывается, для гопников... Ведь металлурги себя и в сланцах неплохо чувствуют 😀😀😀
Что они изготовили?
@@rozasap1253 детали на иранской пво
На цыганей похожи
@@владбро-в9и это их родственники.
🤣🤣🤣🤣
Great respect for these unsung heroes. And they are really amazing.
The essence of the age old craft of metal working . Thank you for making this videos . I've been teaching my nephew how to cast
Makes the mold smooth with adding oxygen air pockets
@drew michael......you go ahead and ass air pockets to your iron casting and see what happens ....don't burn yourself to bad ......if your needing technical explanation do some reading
@drew michael if you use air compressed air you adding oxygen which causes flare ups when poring you molten metal . Co2 does the opposite it pulls the molten metals to the mold . Oxygen burn c02 dosent
Make sure he wears his safety sandals
THIS IS WHAT HARD WORK LOOKS LIKE
This is what lack of social services, labor rights, environmental protections and good ol abject poverty looks like.
Hard work can be many things. This is poverty and it makes me sad
Тяжелейшие условия труда для 21 века. Даже в России так уже не работают. Они заслуживают уважения, конечно.
У нас на заводе так же льют ,пар ТМЗ яр обл,участок ручной фармовки есть ))))) только браку у нас 50/50
@@vladimirgerasimov3356 что льют? Детали на мотор?
Great respect for these unsung heroes.
Thank you, sir.
RUclips channel ko subscribe karo, ☞flash 7star
Если кто не понял это полноценный металлургический завод - цех шихтоподготовки, сталеплавильный цех, формовочный цех... Даже мастер в синем халате присутствует!
А ещё, я заметил что все рабочие работают дружно! А у нас как ? Один работник работает а остальные сидят и указывают 😆😆😅😅
Вот для чего они корабли старые скупают
simple tools + skilled worker = amazing result
Nice work brother. Watching From Qatar
ruclips.net/video/D0wAQF18Xw8/видео.html
I really admire their skills despite lack of tools and latest technology and equipment.
It's not lack of machinery but more like lack of common sense. Machines to automate this work are cheap and can also be self made.
And this is the reason why our exports are not competitive
I hope those are safety toed sandals! Centuries of doing things the dangerous way...But, they are amazingly resilient and HARD working...Some of those tools, fixtures and molds are decades old!
Thanks to the latest technological advances the toe is protected against molten iron heavy weights and even corona!
Some of them barefoot. Extremal life
@@staf5496 :)...I don't even do that in the house!
*I love the shot of filing the screw head. From start to finish in one stroke*
Another great video 👍
Absolutely amazing, such hardworking individuals making brilliant stuff using simple techniques, instead of million bucks machinery. More power to them. 👍
You can do that too if you think your life is too easy …
@@andyxox4168 My life is too easy but age is not on my side! "Sarcasm is the lowest form of wit", Sir Winston Churchill
@@hameedbaba … I wasn’t being particularly sarcastic but no doubt you got the point!
Где-то в офисе под сплитухой в углу тихо плачет специалист по ОТиТБ 😂🤙🏻🤦🏽♂️
Где то в офисе, под сплитухой в углу, тихо радуется чей-то родственник или бездарь продвинутый на руководящий пост дабы продолжать медленно но верно уничтожать таланты, производство и индустрию страны где родился, в угоду "силам" кто видит будущее твоей страны именно в таком недоразвитом примитивизме и в рабстве за гроши.
Так тому и быть.... Они мешают природе проводить эволюцию😉
Боже! Они еще и расплавленый чугун вручную таскают!!! При катастрофе они выживут. А вот избалованые цивилизацыей - все вымрут как мухи.
@@ТетяЛена-в6к Скорее сталь пластилин 3.
Они об этом неслыхали.
It's like watching a time travel. This is about how metal foundries in Europe looked about 100 years ago.
This video makes me thankful for closed toes shoes.
there are many small scale factories still working exactly like this in europe and USA
About 200 years ago :(
These countries governments really need to invest more resources into these hard working people.
You r right
I looked at the complete video and I am supposed to comment that the workers are the ones who deserve appreciation and respect because they are the success of this workshop.
It’s mesmerising.
I’ve never seen such brilliant team work.
They work hard and look totally chilled.
I don’t see many in the west these days with that attitude.
I’m full of admiration for them.
Литейное производство 15-го века.
RUclips channel ko subscribe karo, ☞flash 7star
Там всё на таком же уровне.
Если бы не Сталин, мы скорее всего тоже в сланцах сидели фигурки лепили для изделии
@@КонстантинПономарёв-ж9н это точно☝️
@@КонстантинПономарёв-ж9н ну сталин закупил станки и оборудование на костях ваших прадедов у западной цивилизации. А потом пришел ельцинопутин и вы сдали все это в металлолом китаю, а сами кормитесь с бензоколонки 🤣
One thing is for sure, safety is not an issue.
Weldon amazing
You make your own Safety
I spent almost 14 years in a foundry making huge castings (for steam turbines) weighing several tons. I doubt you will find a 'tidy' foundry anywhere. One thing that made me wince was the guy with the sledge hammer at the end, knocking the hardened sand off the casting. IT'S CAST IRON MATE.
Абсолютно согласен , выбивать отливки так нельзя !
@@АлексТ-у9о Thanks 👍
But that cast iron was still molten on the inside, so would it really be that brittle?
@@pikkuporsas No it wouldn't be still molten.
I agree with you, Sidney. Crazy thing to do.
Столько их роликов пересмотрел... они наверное и детишек как то по особенному делают...
L
Агаа,на ходу прям,в движении с работой. Они видимо ни когда не останавливаются,как муравьи работают.
Good work and good moulding and good poring and good casting,thankyou,
Glad you enjoyed it
ES INCREIBLE COMO TRABAJAN ESTA GENTE.
You can sure tell he's done this stuff a million times, total control.
RUclips channel ko subscribe karo, ☞flash 7star
Just Look At The Sweat At Their Back Respect !👍
MAESTROS ARTESANOS DE MUCHA CALIDAD......SALUDOS MAESTROS DESDE CHILE 2021 ,,,,,,,SON EXTRAORDINARIOS.....PAKISTAN.......
Can’t imagine if drop of molten iron falls on someone’s feet bypassing sandals or beach slippers! That’s gonna be Hell of a Scream of Pain there!
Может быть, но у нас вот так делают просто ни для чего, от скуки. Смотри не упади в обморок --ruclips.net/video/49ly7PkNFlg/видео.html
Don't ever wish such things.That is a ethic in work shops.........
if u scream after, ur going to be fired :)
Respect from India.
RUclips channel ko subscribe karo, ☞flash 7star
#1 takeaway : people in sandals rule the world.
I just read the comments and enjoy them with a smile 😊
Because I see these all every day
Pakistan 💕
Its like a glimpse back in time to pre-middle ages. All the bare feet working around molten steel. And the guy jumping on the mold, packing down the sand with his bare feet. Working with crucibles of molten iron without any personal safety equipment, pure hilarity. Next time OSHA shows up at your workplace breaking balls, break out this video and say "hardhats? Eye protection? covered up bare skin? Footwear? Aint nobody got time for that!"
Классный литейный цех и литейщики. Из всей малой механизации - пердячий пар. Люди молодцы!
A typical small foundry in Pakistan
No pyrometer
No PPEs
No electric cranes
No technical staff
No Engineers
Still these hardworking laborers are working under harsh conditions and producing high-class products.
Yeah I’m sure it’s “high class”
Alex no ... it’s just more comfortable... not safe but comfortable, totally worth it .
All for like 5 dollars a week, Dam that's sad.
It looks like" Germany 1890."
But: Nice work!👌👍🙏
nobody in europe doing this as they... only good thing about this is that you do not need expensive machines
I love these guys ! Bare footed ? God Bless you and Keep you Safe.
Thank you, sir. God bless you too.
🌈🌹Me Too ,, their hands are of gold, "" may God increase them from its good"" ..🌈🌹
Sorry but why is this amazing?
Our very own industrial heritage was doing this many years ago.
You will find out why doing something with your own hands is so amazing 30-40 years from now when robots and AI completely replace humans. Imagine a robot doing all the staff for you - cooking, manufacturing, transportation, cleaning, wiping your butt, thinking instead of you.. And now imagine what would be your purpose in life if you don't need to do anything, all day, everyday - you have a robot to do you it for you, right? Yeah, you can enjoy your life, hang out with friends, travel, explore the world and... feel useless. I hope I am wrong.
These sand crabs as they used to be called in the US are remarkable. It's amazing how any one of them could lose a foot or burn an arm in an instant if they stumbled or made a wrong move. Iron melts at 2800 degrees F. - No eye protection, no hard toed boots, no leather gloves, Nothing! God bless these workers. 😬
Хорошо организованно, Даже никто ни кого на хер не послал.
они работяги за каждую копеечку вкалывают без отдыха другой менталитет оборудования нет нормального но все же крутятся как могут стараются
У них есть сандали даже ;)
Даже работа без матюков не интересно идёт 😂
Другой мир. Это только совок погряз в мате. По скверне впереди планеты всей, причём с большим отрывом.
@@user-mb3bi8mb4s Благодаря мату и гидроэлектро станции есть и атомные и заводы, без него еще на лошадях пахали.
If I have to do this every day- I will be dead on first week. Look at the man with blue clothes- his clothes are totaly wet from sweat. Respect!
These kind of people who move the world forward not a man who wear suit . Respect ✌️
@@deepaksteaphen8030 That's not true, these people doesn't move anything forward, other people only exploit them for cheap labor, these workers should care for their health, their government doesn't give a shit apparently.
@@NO-cb7po sad reality
@@deepaksteaphen8030 what kind of logic is this lol intellectual work is equally important a teacher or a doctor does not do hard work but they are doing smart work
My first two weeks of working in a foundry I lost 40# due to the heat. The temperature outside was almost zero degrees.
Hard to escape 2800 degree heat from our furnace
Хотелось бы им здоровья пожилать)) ну думаю эти уже ненуждаються!!
They are just pure God Gifted people, they can manufacture modern industrial things, with thousand year old basic hand tools, and techniques. 99% of these skilled technicians never went to any formal schooling, just learning on the job. This kind of natural talent I only seen in Pakistan.
Yes, why would you need to use a cordless impact driver on sand?
Good to see the safety sandals and eye safety method of squinting your eyes , good stuff!
Yes, thanks
на первых кадрах с тачкой самый колоритный и позитивный мен!
Very sad that factories in the third world, nobody wears any safety equipment, among the smoke, the dust, the light of the molten metal, and the danger by heat I do not believe that none will arrive old with much health.
On the other hand, it is incredible how with few resources it is possible to manufacture parts with such quality.
These workers will certainly not live to be 60! I call that shit karma
You are right but here in Pakistan mostly Fondry are as
🤣than plzz com my working place 12hour work every day
I think quality is very low, look at forms with non symmetrical holes.
Именно так Китай стал крупнейшим производителем стали в мире.
@@DimaTuk Да, это Индия!
@@Миротворец-в3ъ не Пакистан??
@@lackyluciano362 так одеваются вроде в Индии.
Зато сейчас мы почти всё у них покупаем (кроме сырья). даже гвозди перестали делать. Грустно. Неужели это наше будущее?!
@@ИгорьС-ъ9в даже не знаю чем тебя порадовать.🤔
After WW3 these guys will get the world moving again. They waste nothing and fix and repair everything. It's easy for us to mock them from our comfortable and controlled surroundings. Love respect and good health from Scotland UK
I don't think modern technology is a blessing for these guys
"factory" is a big word! :)
ruclips.net/video/D0wAQF18Xw8/видео.html
no show the complete finished product???
I think it was a cast iron toilet seat.
I think its an irrigation water pump.
Tank Hatch
According to the *Description* . . .
well, you can read it yourself . . .
Тех кто считает, что это литейка 15 века вынужден огорчить. Данные технологии используют и у нас на одном из крупнейших заводов оборонки в центральной части страны. Обусловлено это лишь тем, что некоторые детали экомически целесообразно выпускать именно таким способом. Для более сложных и точных деталей формы делают ЧПУшные станки методом послойного спекания. Нужно быть просто идиотом чтобы делать форму для оливки канализационного люка или гусянки трактора на ЧПУ.
Lot of work. All hands on deck.📡👽🇺🇸 Cool vid.
I'm not sure if I should be impressed at the amount of work and the heft of these guy's balls to do all this and in sandals no less....or upset if they are forced to do so because of the state of things.
Good to see such videos. @ Wow things, please include in your introduction that these are Hard Working, Pakistani gentlemen, This would help promote the industrious nature of general Pakistani people in the World and maybe who knows, Top World Industrial Companies choose Pakistan to build their factories, hopefully, God Willing. I am a Pakistani American and I have seen such hard working people back home in Pakistan.
7:02 epic move!
Lets flip 400 lbs of mold, gently.
No crane required.
Just Ballance and Confidence.
Mind Blown!
RUclips channel ko subscribe karo , ☞flash 7star☜
Охренеть! Техника безопасности на уровне средневековья. Резиновые тапочки на босу ногу в литейке, нет даже элементарных очков и перчаток... Папуасы, что с них взять.
да уж, вот это технологии, вот это жесть, но но тем не менее.
для справедливости следует отметить что индия представлена всем спектром технологических укладов которые умещаются в одной стране, от древних паровых машин, до современных станков английскго производства 50тых годов прошлого века(Криосан делал экскурсию в этом году по индийской частной лавочке, интересно взглянуть), до производства локального истребителей и космических ракет.
Мне интересно в какой стране ты живеш
Send the U.K. work shy ppl there for a day . Mad respect to those brothers
Супер !!! У нас литейка с такой печью !!! Гонят сплошной брак !!!! А механизмов у нас поболее будет !!! Молодцы ребята !!!!!!
Большое спасибо за ваши благодарности!
Шо? Опять алгоритм ютюба нас всех здесь собрал? :D
Да
Техника безопасности...
Добрый вечер
Алгоритм работает...но всё видео такое убожество,,, сочувствую людям...
@@HFddHFddHFdd Please? English if possible
Hut ab für diese Männer.... Voll Respekt.
Тапочком придержал деталь температурой 1100 градусов по Цельсию. Смелый человек.
Я вообще в шоке с их менталитета,никакой ТБ,льют босиком,работаю голыми руками без СИЗ,в каких то национальных одеждах с торчащими тряпками,хоть и руки золотые,но культура труда ниже плинтуса просто....
@@ВсякаяВсячина-с5ч В США самые высокооплачиваемые работники в IT сфере.
По лучами в 2- 2,5 выше зарплату чем тот же белый американец.
Ellerinize sağlık kazancınız bereketli olsun 💪
The one guy running a call center asking people about their expired car warranty while stoking the fire. Brilliant multitasking.
Говоришь работа у тебя не любимая?
🤣🤣🤣🤣🤣
Great skills and team work,well done guys👊
Alright everyone, we are about to pour the molten iron, every worker running around the work place barefooted must put on there safely sandals. 😄
For somone barefooted Industrialization is a daily life
Safely flip-flops!😁
@@sdsfgsty Ah yes... you are correct... safety flip flops. 😄
Believe me if they could afford steel toe safety boots they'd wear them.
@@saadhasan2300 They dont need to be steel toe safety boots, they should at least be something with a closed toe so that their feet isn't the first thing that hot steel hits if it should ever rain on them.
Handmade..is amazing 😎👍👍👍👍👍
I worked in an iron-casting factory when I was 15. I'm astonished that these gentlemen work without safety gear, or even shoes. No denying they're hard workers, but, geez, somebody donate some steel-capped boots to these guys :-)
Shit man! You put one these guys in hard shoes or boots they'd kill themselves tripping on a shadow of a crack! Be more dangerous for these cats than the flip flops!!
@@tomcline5631 While I agree with you, somewhat, the fact is that they can take some time to get used to safety gear. Without it, every injury has a chance of catastrophic outcomes. I do get your point though.