eKyro Smart Garage - Customer Installation & Review
HTML-код
- Опубликовано: 13 сен 2024
- A customer sent us a video of their eKyro Smart Garage Door Installation. The review/feedback was not solicited but certainly was appreciated!
We enjoy customers who use the eKyro Smart Garage Door Opener to its fullest potential!
I installed one of these a couple of weeks ago on a new garage door opener. The new opener had the MyQ system, but I added this smart garage device to get easy connectivity to Alexa and Siri for home automation tasks. In my case I needed the adapter from eKyro to connect the unit to my garage door oper. I reached out to eKyro, got a same day response and immediate shipment (for free) of the required adapter (essentially a new remote that you program the opener to recognize and has wires coming out to connect to the eKyro smart garage device). I paired the adapter and connected it to the eKyro device with no issue. Setting up the app for Alexa connectivity was a breeze and adding shortcuts for Siri connectivity was straightforward.
The only two issue I ran into were: 1) The wire is for the open sensor is long, but was still short enough to require me to go straight from the unit to the top of the door as shown in this video. I would have preferred to run it around more and mount the magnetic switch to the side of the door. 2) I set an auto-close routine for 10pm in the app, but it doesn't seem to work. I haven't debugged why that is, since the app allows open/close of the door just fine. I will have to debug this issue a little more.
I have a really old Stanley opener. It works really well but impossible to get replacement remotes. Years ago I added a third party receiver with remotes. I installed the smart garage door opener. Easy installation. It connected to my WiFi right away. Installing the sensor was the challenge. I had to do the same think you did by adding a piece of wood so the magnets lined up. That took the longest part of the installation time. I like that I get notified when the door gets open or closed. Thanks for the video.
Awesome! Nice work at getting the sensors lined up, depending on the setup it can be slightly tricky.
👏👏👏
-eKyro Team
Great video I'm sold, I only hope it will work if you are away from the home like my other WiFi devices. Thanks for sharing.
Hello Troy, yes it certainly can work while you're away from home as long as your mobile device has internet connectivity (3G/4G LTE/5G).
Does Siri only work on Wi-Fi? Seems to work great in home but pulling away just out of Wi-Fi range this function doesn’t work. The whole point of this is to open/close garage door as driving away.
Siri should work anywhere your phone has internet.
Sometimes when you’re just pulling away from your home your phone might be switching between wifi and cellular data and there might be a little bit of time where it doesn’t work while it’s connecting to the cellular data.
Your Siri should work fine once you’ve moved a bit further away. Can you confirm?
-eKyro Team
@@eKyro I reset and seems to be working now at the moment. Is there a way to add to HomeKit with iPhone I see the option with app but don’t have a code or nothing to scan?
great tutorial video!
Glad you liked it! Shout out to one our customers for sending it to us!
Does it support homekit (not siri open), but as a button in IOS control center?
I just bought this and mine only came with the wired sensor and not the other one, where do I contact to get the sensor?
Oh no! Send us an email at info@eKyro.com and we will get you taken care of.
-eKyro Team
When I installed mine it killed the manual button I have a chamberlain system to.
Hello!
It should not have affected the manual button if you reconnected the wires from the manual button.
You will want both the eKyro opener and manual button connected at the same time.
Reach out to us at (info@eKyro.com) if you need more assistance.
-eKyro Team
Can you close and open garage door while your at work?
Yes!
We have quite a few videos on our website (eKyro.com) where you can see other features and an install example.
Can you install it without the sensor ?
Hello Roy, if you install it without the sensor the door will always show as Open on the application.
Also, since the eKyro Smart Garage Door Opener will think that the door is open, if you try to use open voice commands through Alexa or Google Home they won’t work (if the door is open, it won’t send a command when asked to open.)
@@eKyro thank you !! Got it now.
hello so 1 and 2 are dry contact so u installed modle in parallel what chamberlain original keypad u jave thanks
Great! If you end up needing help give us a holler at info@eKyro.com
so it is correct waiting for my module
@@andrekhoury6252 Are you in need of an adapter (yellow learn button) or some purple learn buttons, if so it can be requested from our website (eKyro.com)?
Or are you waiting for your eKyro Smart Garage Door Opener to arrive?
Please contact us via email at info@eKyro.com if you have more questions.
Is it compatible with liftmaster
@@kristopherbrednner4837 it certainly is! Some liftmaster openers (typically yellow “learn” button) require an adapter to function fully. You can check at go.ekyro.com/gdocomp.
How to reset device?
Press/hold the reset button for 5-8 seconds and the light should start to blink and will be ready to pair.
-eKyro Team
Lopez Linda Taylor Lisa Lee Anthony
Harris Jeffrey Anderson Edward Thomas David
Hernandez Nancy Anderson Jennifer Miller Nancy
Anyone know if these need to be connected to the home wifi or is direct connection to the phone possible?
Hello Jacob, sorry for the delayed response, the eKyro Smart Garage Door Opener connects to your WiFi so it can be controlled by your phone/tablet from anywhere.
@@eKyro mine keeps saying device offline
@@dangerklose8406 sorry about this! We can certainly help you troubleshoot if you reach out to us at info@eKyro.com.
Lewis Anna Hernandez Nancy Moore Scott