Prevent Fermented Honey - Drying & Extracting

Поделиться
HTML-код
  • Опубликовано: 11 дек 2024

Комментарии • 141

  • @dodge1137
    @dodge1137 Год назад +1

    A stainless steel plate under the pour spout, wood bee (lol) a good addition. Will keep 2x4’s from getting goopy allowing good sanitary clean up.

  • @CooperBees
    @CooperBees Год назад +2

    Such helpful information to a fairly new beekeeper. Thank you for taking the time to share!

  • @stufarnham
    @stufarnham 3 года назад +1

    This is Rob ably the most informative, practical video for the small scale beek I have seen. Thank you!

  • @danielwhiteman9120
    @danielwhiteman9120 3 года назад +12

    Just sold me on the paint strainer. Thanks

    • @scotthibbs
      @scotthibbs 3 года назад +2

      Me too. Gonna use it a lot. First thought is home brewing.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      It works pretty well, and it's sure easier than all the other methods I've seen of processing honey and wax, at least on a smaller scale.

    • @cheapsmoke4096
      @cheapsmoke4096 3 года назад +1

      barnyard bees showed me this also and its the best idea! :D

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +3

      Funny how much thought beekeepers put into making beekeeping quicker and easier. And if we actually do make it easier the next thought is getting more hives LOL.

    • @danielwhiteman9120
      @danielwhiteman9120 3 года назад +1

      Absolutely right. 2nd year beekeeper myself. Went from 2 to 8 hives. In my boat crappie fishing thinking about bees. Hard to get them off my mind

  • @628DirtRooster
    @628DirtRooster 3 года назад +1

    We’ve been using Firehouse Subs pickle buckets for cut outs and they split on the bottom as well. I need to get some of those good buckets.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      I think 90 mil is the way to go. Or rather .090 mil.

  • @ZelmaBees
    @ZelmaBees 3 года назад +1

    Timely and informative video; thank you for the time and effort you put into making this info available.

  • @tonybosso9150
    @tonybosso9150 3 года назад +3

    Fantastic video ! I am just getting started into bee keeping this year with my 12 year old son. I also have a 20' shipping container I plan on converting into our honey house. I like the spray foam idea on the inside. I have been trying to figure out the best way to insulate the container and put power to it, and seeing what you did in your seems like a great solution. I also enjoy watching your videos as I feel I am very close to where you are in this beekeeping adventure. Actually I am prob about a year behind as I am just starting this year. I started off with three colonies in April, then caught a swarm from one for a total of four. I had to purchase and assemble all my hive equipment and my goal is not to collect any honey at this time but to have these four colonies successfully over winter and then do splits with strong hives in 2022. I appreciate your methodology to beekeeping and looking at it as a complete system. Thank you for producing interesting & informative content !

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +3

      Starting out it seems like I'm behind all the time! The honey house is a work in progress. I got some of those desk grommets that allow you to run extension cords through a desk....I'm going to drill some 1 3/4" holes in the floor of the container and run cords out using those grommets. Then I can fill the hole with spray foam and everything will be tidy and ant proof. I've also got to build some shelving to store bottles up above the AC and dehumidifier. I'll probably run a support across the ceiling eventually so I can get some more permanent lighting in there. Work in progress as I said :). Good luck to you and your operation, bees are a lot of work but very rewarding.

  • @jbeebuchanan2136
    @jbeebuchanan2136 3 года назад

    Great content thanks for sharing.
    I'm in almost the exact same boat as you.
    3rd year beekeeping. I had 10 hives going into winter last year. I lost one hive to a Queen that turned into a drone layer in early spring . At about 20 hives right now and produced about 750 lbs of honey.
    You are a lot smarter than me though and upgraded your equipment.
    I ordered the exact same setup that you have a couple weeks ago. It won't be here for another 6 weeks so too late for this year but hopefully next year's harvest will be less tedious.
    Thanks for taking the time

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks for the encouragement! The equipment can sure make it less of a headache to manage everything with minimal labor. I’ll be glad when most of my infrastructure and hive building stuff is done with. It’d be nice to put it on cruise control a little more next year.

  • @brianbennett4374
    @brianbennett4374 Год назад

    Really enjoying your video's thanks 4 sharing with us. 😊

  • @davidphipp9750
    @davidphipp9750 3 года назад

    Just want to thank you for sharing your knowledge. Having lost my only two hives late last year to the Asian hornet I put out three bait hives of your design, and after a somewhat bizarre year of weather so far I picked up two swarms this week. Thank you again, you have an excellent channel, from an Englishman in France.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Awesome to speak with a British Expat beekeeper living in France...how crazy is that?! What do you do for the Asian Hornets? I've seen a lot of hives in Europe that have wire mesh around the entrances to keep the hornets away.

    • @davidphipp9750
      @davidphipp9750 3 года назад

      @@DuckRiverHoney as with everything beekeeping opinions vary greatly when it come to dealing with the AH. Our experience is that we had two strong very productive hives for two years but late last summer they succumbed to the pressure of the AH. The hornets would stalk the hives taking bees in flight departing or returning, many bees would evade capture but generally the hornet would not depart until successful. We tried swatting a few which although mildly rewarding is fairly futile. Some AH we watched squeeze in the through the front entrance but most I think they gained entry through defective metal mesh bottom board screens that had become detached, lesson learned on that one. At the end of September I think both hives had had enough and departed, one hive completely leaving all stores and a few dead hornets the other a handful of bees remained but were ultimately doomed. So unwilling to give up just yet and inspired by you and your channel I built three medium box bait hives and as insurance I ordered a nuc which is doing really well. Our strategy re the AH this year has been to put out a number of hornet traps in early spring to catch any emerging AH queens, and use an anti hornet entrance on the front of the hive. It is a plastic reduced size replacement for the metal entrance, in theory the AH can’t get in now and they haven’t so far. Thank you again for all your work with this channel, I have learnt so much from you. Kind regards.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      David, very interesting stuff. We’ve had a few AGHs found on the northwest coast, probably came on a ship and made land. I hope they get them eradicated but if not I’ll be dealing with them in my lifetime most likely.

  • @joecallahan3379
    @joecallahan3379 3 года назад

    Very professional, thank you, good information

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      I appreciate it, but I'm no professional. Just an obsessive student. Hope it helps!

  • @sonofthunder.
    @sonofthunder. 3 года назад

    congrats on a great pull,great info on honey drying,its amazing

  • @babybeeapiaries8667
    @babybeeapiaries8667 Год назад

    I added Maxant chain uncapper to my operation this past year, what a difference!

    • @DuckRiverHoney
      @DuckRiverHoney  Год назад +1

      I hear it’s a very nice machine.

    • @babybeeapiaries8667
      @babybeeapiaries8667 Год назад

      @@DuckRiverHoney I like it, it really sped up my operation, now I need and uncapping tank.

  • @woodlandharvesthoneycompanyllc
    @woodlandharvesthoneycompanyllc 3 года назад

    Excellent Excellent video! All of your videos are spot on and very helpful. I'm in the about the spot you were in last year. Started with zero bees this spring and have 6 hives now. I am not worrying about much honey for myself this season. I want to do a really good job with summer management so my bees get through winter good and healthy. Hoping for a great startup next spring. I am looking forward to your management videos. They will be helpful as all your videos are.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks, I appreciate the encouragement! Queenright, well fed, and low mite loads are the biggies for summer. I also manage for dearth a bit by planting buckwheat and making sure the small ones have an entrance small enough to defend.

  • @w6qd
    @w6qd 3 года назад

    Excellent video, well done. I'm going to give the paint strainers a go. I've had the same issue with the stainless steel strainers. For some reason I have more wax was coming out of the extractor and into the bucket, which caused the strainers to clog early and caused frustration and slowing of the extraction process.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      That was the trouble I was having with them. Thanks!

  • @MinnesotaBeekeeper
    @MinnesotaBeekeeper 3 года назад

    We did the exact same method last year, top stacks, fans on top and 90 degrees. And speaking of premium, we accidentally reduced our wildflower honey down to 12% moisture plus or minus. I've had people that don't like honey get excited over it. The demand is beyond what we cnn produce. This year we will be getting 15 dollars a pint. Just something to ponder.
    Very excited for you, well thought out!

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Bob Binnie says that thicker honey intensifies the flavor...he sells a lot of 16% honey. I don't think I've ever had 12%, it'd be interesting. Thanks!

    • @MinnesotaBeekeeper
      @MinnesotaBeekeeper 3 года назад

      @@DuckRiverHoney I got the idea from Mr Binnie. Think of a chef reducing a sauce to intensify the flavor. Yes the 12% was an accident but the results were rather spectacular. But of course thicker, it won't win any "regulation" blue ribbons.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Yep, and the bottles don’t stretch as far either, and to fill them full they’ll be overweight.

    • @russellkoopman3004
      @russellkoopman3004 3 года назад

      @@MinnesotaBeekeeper Honey at 12% must be really thick and slow pouring right?
      I use a dehumidifier also but I was happy at 16% moisture.

    • @MinnesotaBeekeeper
      @MinnesotaBeekeeper 3 года назад

      @@russellkoopman3004 honestly it wasn't as thick as you might think. I was surprised.

  • @rodneymiddleton9624
    @rodneymiddleton9624 3 года назад

    Great idea for a container honey house!!! Thanks!

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      I don’t claim that idea…it’s been done before. Works pretty well, though I’d say the insulation is necessary.

  • @sporkintheeye
    @sporkintheeye 3 года назад +3

    I wish I had seen a video like this a couple of years ago. I now have a similar procedure (but smaller) but had to "discover" it myself. I struggled with 18-19% honey for 2 years before I wised up.

  • @BrownAndDaughters
    @BrownAndDaughters Год назад

    I like the base. Once you find a location you like you can put some threaded inserts with epoxy in the floor then use 1/4 x 20 screws to secure it down. That way you don't have to make new screw holes each time or worry about stripping out the wood if you reuse old screw holes.
    Jon Peters and Blacktail Studio have some good videos about threaded inserts.
    - Conner

  • @pirateprospecting707
    @pirateprospecting707 3 года назад

    Perfect idea! Thanks for the info!!Looks like you've got it down. I'm a 1st year beekeeper ✅😁

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks! My operation is finally coming together, but still lots to do.

  • @ME_MeAndMyBees
    @ME_MeAndMyBees Год назад

    Did you see that Honey Trickle on your Base Edge Tip :
    You might be able to get a slightly longer (deeper) Drip through Gated Tube.
    Whait until the Tank is not in use. Clean and then dissassemble the old one. And add the Longer one. So that Honey pouring out of the Honey Extractor Tank has a nice over Clear Pouring Space. Simples. 🙄
    Or you could edge your whole Unit a bit closer to that edge. Why you ask ?
    Did you see Honey doesnt pour straight down like Tap Water. It has more Viscosity (Trickle Thickness !) so it Drips and Wiggles backwards and forwards, as it pours into your Honey Bucket ! 🤭
    Don't get in a Sticky Mess, think your Measurements out before making a Wheelable Base. Or know how "Honey" Flows !
    Hope this helps. 😎
    🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝
    Happy Beekeeping 2023
    🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝
    Those pouring Gated Tubes have different lengths, with Inner and Outer turnable Collars and Rubberised Gaskits Circular Disks.
    Just a case of getting one that fits right to your Equipment ! 👀
    Us Hobby Beeks can Tilt forward that Holding Tank, say on the Kitchen Table, maybe a Worktop. But these only hold x2 Deep Honey Frames. . . To that of the Huge Electric multiple
    Frame holding one shown in this Video.
    So remember your Equipment space / use needs before making a Honey Room (temporary) or Honey House (Industry)
    when buying a Honey Extractor ! 🤔

  • @daverowden-RowdyBeeFarms
    @daverowden-RowdyBeeFarms 3 года назад

    Thanks for the Info...I Loved the video...

  • @jeffthomas7549
    @jeffthomas7549 3 года назад

    Good video. I have been using paint strainers also they work well. Keep up the good work..

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      Thanks Jeff! It's funny how so many beekeepers converge on the same things. It'd be so much easier if there was a manual. "You have this many hives, do THIS for your life to be easier."

    • @jeffthomas7549
      @jeffthomas7549 3 года назад

      @@DuckRiverHoney I have 20 hives just a small hobby. Lol

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      “Small hobby” must be code for “lot of work”. LOL

  • @michaelfike7542
    @michaelfike7542 3 года назад

    That's a good honey harvest for all the work you put into your bee's. Hopefully I'm on the same path with 12 hives to start with. Had a great swarm catching year i gave several swarms to people who wanted to start beekeeping. I'm going to get some honey this fall but I'm leaving most of it for the ones that made it. 👍❤🐝

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      If we continue to be wet through July and August then I'll put supers back on first of September. Moisture in those two months has a whole lot to do with whether goldenrod produces nectar or not in the fall.

  • @TracysBees8713
    @TracysBees8713 3 месяца назад

    Great video

  • @Pchoppy4115
    @Pchoppy4115 3 года назад

    Great content and info

  • @JeromeBeeFarm
    @JeromeBeeFarm 3 года назад

    Nice harvest! Man that’s a nice setup you have there. I looked at that style uncapper a while back and decided to stay with the hot knife. I even bought a second knife and tank to speed things up. Your method is ten times faster than the knife. I was concerned with the way it looked like it chewed up the comb because I reuse my comb. It looked like it did pretty good. I don’t get hardly any cappings in my filter though. I’m planning on pulling my honey tomorrow and will be testing for the first time. We’ve had a super wet year and I’m concerned about fermentation. I usually harvest the second week in July but out it off because of the moisture. I hope I can get half what you have. Thanks for the shout out.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      I was concerned about the comb too, and about not collecting as much wax. It actually doesn’t chew the comb up bad at all, it just leaves the wax cappings perforated and hanging loose, so it LOOKS damaged but really isn’t. I get very little cappings through the extractor. I found if you can let bees clean up the wet supers then you can stack them on concrete or old tin…bees chew off those loose cappings and they fall down. Sweep them up and process when the supers are dry. So my two worries - damaged comb and less wax - both were off base.

  • @taylorboysoutdoors
    @taylorboysoutdoors 3 года назад

    Nice set up

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks, still lots of work to do but it's coming together. It'll look a lot more dialed by next year.

  • @RB-cz5jn
    @RB-cz5jn Год назад

    I find it interesting that you have not had more problems. Being someone that has traveled.
    I deal in Arkansas/Missouri/Oklahoma/Nebraska/California/Kansas.
    The answer has already been solved.
    But it’s a legal question going forward.
    There maybe a financial incentive as well to keep that under someone’s hat.
    Bob is a great guy he would never do that.
    My friend done extensive research.
    The guardian (red devices in video works)
    Tubes work.
    Sheets work the swifter the other see story below.
    You can bring a infested hive back but I wouldn’t use it for honey production.
    He also placed a porno mag pages and he sat and watched the students work hives. It took the bees less than 30 minutes to remove those pages.
    We was waiting for the response none.
    There’s 12 items that no one will list.
    1 was in a video Bob did.
    Friend brought back a hive in less than 2 days. Says it’s a contact killer don’t know.
    The rest he uses a lot of roach bait around his house..
    You’ll get ideas else where.
    But I can guarantee there’s no roaches anywhere near his place he baites.
    Should I post or not.
    Speaking on behalf of a friend that has thought about l laminating porno mag page just so it will stay long enough to see if the students are checking hives.
    Here we go

  • @paulsanto129
    @paulsanto129 6 месяцев назад

    This is an excellent video for information and resource link to honeybeenet.
    could you please elaborate on how you identify when there is a nectar flow or dearth. Can you identify flow by bee activity like you can when they are bringing in pollen. Please list the telltale nectar flow signs from most obvious to the hardest to identify.
    Thank you!

    • @DuckRiverHoney
      @DuckRiverHoney  5 месяцев назад

      Foundations getting drawn is the telltale. Otherwise supers filling up. I do have some hives on scales now which is very helpful.

    • @paulsanto129
      @paulsanto129 5 месяцев назад

      It's my belief that bees 'DARTING' rapidly out and to the hive in straight 'Bee Line' is a sign that bee are on a honey flow. Many years a bee keeper mentor told me that's where they got the term Bee Line from. Straight to or from the nectar source. Please mention if you see a correlation of this activity with a honey flow
      Thank you

  • @AlexDiegin
    @AlexDiegin Год назад

    Great video.
    What kind of bags do you use for honey filtering?

  • @virginias.9529
    @virginias.9529 3 года назад

    This is Not a Hobby anymore Nathan, It's a 1st class Honey Operation!! Congratulations on your Honey Harvest!!

  • @usmcPath
    @usmcPath 2 года назад +1

    This is great info. I have been stressing about a honey house and I never thought about a shipping container! Those “ready built” sheds are so much more expensive than this.
    Also, what song is playing toward the end?

    • @DuckRiverHoney
      @DuckRiverHoney  2 года назад +1

      Thanks, look closely at a 40, I already wish mine was bigger. The song was something I got from audiojungle, believe it’s a Russian artist.

    • @usmcPath
      @usmcPath 2 года назад

      @@DuckRiverHoney yea i was thinking about the 40 after having looked at them now. That extra space can be winter storage. Central Nebraska here. Thank you for the reply!

  • @knowbuddy6282
    @knowbuddy6282 6 месяцев назад

    Question - is there a market for wetter honey ? Just wondering because I like to make mead . It's sound ideal to go with what's already happening naturally .
    But I guess it would be on a time crunch to get it sold and shipped . ??🤔

    • @DuckRiverHoney
      @DuckRiverHoney  6 месяцев назад +1

      Yeah mead would be a market, but it’s a lot easier to deal with stable honey.

  • @sharonross4535
    @sharonross4535 3 года назад

    Hi Nathan. I live in Ohio. Where do you buy your supplies? Im a beekeeper and I really enjoyed this video. I found you on Kaye’s channel. I am a subscriber of her channel and I am now a new subscriber of yours.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks Sharon! I buy a lot of mine online from Dadant, betterbee, or Mann Lake. There is also an Amish maker semi close to me.

  • @burleybeeyard
    @burleybeeyard 2 года назад

    Extremely helpful video. Now I’ll be going down the shipping container and spray foam rabbit hole. Thanks. What do you have as a foundation for the container?

  • @Sloboda369
    @Sloboda369 2 года назад

    Good luck...

  • @peterlightbody8443
    @peterlightbody8443 3 года назад

    Well I learnt something on that one , I actually use paint strainers , but I never knew you could get them for 20 litre buckets, will be investigating .

  • @macopeland1
    @macopeland1 4 месяца назад

    Where is the Uncapper Roller Machine?

  • @jasonseaward8506
    @jasonseaward8506 6 месяцев назад

    How do you test how many yeast spores are in each gram?

    • @DuckRiverHoney
      @DuckRiverHoney  5 месяцев назад

      I don’t, a lab would have to do that. With experience you can figure out what a safe level is for your area.

  • @ZoysiaRUs
    @ZoysiaRUs 3 года назад

    How are you storing your comb over winter?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Stacked 7 supers high with paramoth up top.

  • @dandorosheff256
    @dandorosheff256 3 года назад

    Very informative video. Great set up that your developing. Could you make another video focusing on the components of your extraction process? I believe your uncapped is from Simple Harmony Farms and retails for $50-60. I have 30 colonies and want to up my game.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      I do have the simple harmony, but that uncapper is much more expensive, more like $450. But in uncapper terms that is a very good value. My uncapping tank is from Maxant and my extractor is a maxant 20 frame. I also have a 42 gallon Maxant bottling tank.

  • @jamesruan913
    @jamesruan913 4 месяца назад

    Hello , I know this is a 3 year old video and am unable to find mentioned in the video the unit that allows you to dry out the honey - working the air humidifier and the heater in the honey house , could you direct me please

    • @DuckRiverHoney
      @DuckRiverHoney  4 месяца назад

      I’m using a dehumidifier. I don’t have to heat the building, summer does that for me.

  • @hockinghillshoneyfarm9273
    @hockinghillshoneyfarm9273 3 года назад

    Hi Nathan what kind of uncapping tank do you have I'm looking at getting something new or building one I really hate the cost that they want for one. Thanks keep up the great job you are doing love watching your videos you and I are about the same size I have 31 hives right now I was thinking I wanted to get two 50 but idk it's a lot of work with 30 lol

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +2

      I got the Maxant mobile uncapping tank. For me it was that or Dadant. They are expensive and will likely get more expensive with the inflation we have now. Glad I have mine, and fully expect it to last my lifetime. Ditto on the workload!

  • @cmasey123
    @cmasey123 3 года назад

    Wonderfully informative and helpful. Congratulations on the crop! Where can get one of those good looking t-shirts?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      LOL, thanks. I wasn't planning on selling those shirts, I gave them to family. I'd have to get more made.

    • @cmasey123
      @cmasey123 3 года назад

      @@DuckRiverHoney There's some services out there that make it where you don't have to manage much. @OutOftheWoods uses one ruclips.net/channel/UCiPGkIebcT4QmEw6P6Lkubw. No worries - but they are nice! :)

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      I’d never heard of such, thanks! I’ll have to look into it. It’d sure be easier to do all these videos if they became self sustainable.

    • @cmasey123
      @cmasey123 3 года назад

      @@DuckRiverHoney Totally, I think he uses shirts and caps as a revenue stream to buy camera equipment so it's definitely helpful. He's a great guy and I'm sure wouldn't mind if you reach out.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Funny you brought all this up…I’ve watched some of his videos, and I’ve actually got a Peterson swing blade mill that should be delivered in the next few weeks. I’ll be doing a lot of milling over the winter.

  • @SecretGardenBees
    @SecretGardenBees 3 года назад

    Are you using a 40ft or 20ft container?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      I’ve got a 20 footer. I won’t say that’s best though. It is easier to control the temp in, but I believe I’d rather have a 30’ if I could find one.

  • @burleybeeyard
    @burleybeeyard 2 года назад

    Did you do spray foam yourself?

    • @DuckRiverHoney
      @DuckRiverHoney  2 года назад +1

      I did. If you can buy one already foamed I’d recommend that, unless the price is unreasonable.

  • @BeeGeeTheImp
    @BeeGeeTheImp 3 года назад

    Excellent content, as usual. Is the Harmony Farms uncapper open on the bottom and drips through to the sink, or is there a collection tray underneath?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      It’s open on the bottom, so you really need an uncapping tank to get the best out of it.

  • @DuckRiverHomestead
    @DuckRiverHomestead 3 года назад

    I'd love to get started with beekeeping. Want to come out and help us out next spring?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      I stay pretty busy, I mentored a bit this year and will change it up a bit in the future, for less time commitment.

    • @DuckRiverHomestead
      @DuckRiverHomestead 3 года назад

      @@DuckRiverHoney Cool. I hope you make this work the best for you as you and your family need. I'll keep enjoying your videos. God bless!

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад

      Thanks!

  • @christopherw4527
    @christopherw4527 Год назад

    25 to 30 production hives and you have tee shirts made? Not knocking it, but I've learned to put the money into growth before advertisement. Sometimes you can't meet the demand if you go that route. Either way, I like your content and wish you success. Your video with Bob Binnie on honey house design was really well thought out.

    • @DuckRiverHoney
      @DuckRiverHoney  Год назад +2

      Christopher, it’s easier to scale honey production than it is to build brand recognition and scale customer base. Marketing needs to grow with production. Plus, I have this RUclips channel, and people have asked for shirts. 😉

    • @christopherw4527
      @christopherw4527 Год назад

      @@DuckRiverHoney I see. Sounds like a good plan.

  • @tritonewr4054
    @tritonewr4054 3 года назад

    What’s your plan to sell that much honey? I’m guessing I’ll get almost that much honey this year, and I have no idea on getting rid of it. I don’t ever see myself at a farmers market all day. How can you find bulk buyers?

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      I’ll do a full video on honey marketing. To be honest I’ve got a lot of experience with marketing so I’m probably better at that than at beekeeping. Short of it is we’re pursuing limited retail, have a waitlist on Facebook (my wife uses the “mom network”), and we had custom labels and a brand made.

  • @3Beehivesto300
    @3Beehivesto300 2 года назад

    Your buckets are really full. Leave 4” of head space if your going to let it crystallize.

  • @zahrahoneypakistan9798
    @zahrahoneypakistan9798 2 года назад

    Hello sir، can you give me an idea for drying extracted Honey?
    Actually we are not Honey farmer ، we just go to the jungle and harvest wild Honey۔

    • @DuckRiverHoney
      @DuckRiverHoney  2 года назад

      Lots of surface area, low humidity, and warm temperature. There are several ways to do that, but it’s easier when honey is still in the comb.

  • @garden7799
    @garden7799 4 месяца назад

    Why does my honey turn rock hard in 2-3 weeks. Don't know moisture content

    • @DuckRiverHoney
      @DuckRiverHoney  4 месяца назад

      Nectar source. Canola will do that as it’s high in dextrose.

  • @namentatic4978
    @namentatic4978 3 года назад

    My honey is showing direct from the hive, capped, 15.5%.

    • @DuckRiverHoney
      @DuckRiverHoney  3 года назад +1

      That’s great, you must live in a drier area than me. I actually had some capped honey test at 19.5%. I dried my uncapped down enough that after mixing my buckets are a consistent 17 to 17.5%.

    • @namentatic4978
      @namentatic4978 3 года назад

      @@DuckRiverHoney I'm in Richmond, VA
      Pretty humid and here is my water station.
      ruclips.net/video/M4_Ll8fQm3g/видео.html