Hello brother, I have a Truck man f2000 lf 22 420 hp d2866 with two valves for each cylinder, mechanical injection pump, and I want to adjust the injection time. Is it at 0 or 3 degrees? Thank you.
Bos pwede po ba ako magtanong kc yong trak na unit na Kasama ko po hndi po magawagawa ayaw po kc pumanik ang flued sa masbosster galing baba po ano kaya pwede sulostion dto
Hi bro how are you I have man TGA 41.400 vehicle. There some fault code(EDC Diagnosis 03781-01) is coming and at the same time the black smoke also coming from smoke silencer. Please Can you give me some solution for that and what I have to do for that problem
Kuya me TGA ayaw mag start dati naman umaandar,me cranking naman. Nag open ako ng high pressure line ng injection pump walang fuel,me shut off valve pa ba ito?
Ay injection pump pala yan sir?kahit ba i manual pump ayaw parin mag andar?.yobg isa kasing nakausap ko ganyan din problema ayaw umandar pero kapag minamanual pump naandar daw saglit pero namamatay din.sabi ko palitan ng fedpump.ng pinalitan nya umandar na
Bagong palit na po manual pump pati fuel filter pinalitan na po,pag nag pressure na manual pump me parang release ng pressure sa injection pump pero pag kina crank walang fuel na lumalabas
Opoh sir injection pump kasu doble ung cylinder head ung compresor at devider ung cylinder head ng makina nia binaklas kc i2 ng ibang lahi dna tinuluy bka po pwd makahingi ng ideya sainyo
Hello sir,EDC 00833-ROCK SENSOR i never experiencd this kind of trouble yet,but this is in the injection pump.can you check firts the cable wire connection or check this link.Hope it will help thanks. ruclips.net/video/hPA0LxK_G2E/видео.html
Great work , where i can find your workshop in saudia . Thanks
Please help me bro. A have a serious problem with my truck MAN TGA 26460. The problem is EDC 638-02. What is the problems.
Edc 0638 is thr rack actuator.check the cable connection in injection pump.or check the rack actuator for malfunction
Good morning bro I watching your videos 💯👍❤️❤️👍👍❤️👍❤️❤️👍
Thanks for the support brother
شكرًا
Hello, is it identical with the 2866 engine? and do you know the points for tightening the nozzles? thanks in advance
Hello brother, I have a Truck man f2000 lf 22 420 hp d2866 with two valves for each cylinder, mechanical injection pump, and I want to adjust the injection time. Is it at 0 or 3 degrees? Thank you.
Wow galing nman kapatid. Ganyan Pala yan
Hello mam salamat po
Good information ❤❤❤
Thanks sharing sir
Good info lods but need clean the ingine if the price is right 😂
The engine is D2876
how did you know
I know this because I overhaul MAN engines as my job
please make a video and explain by drawing at the board, the logic of timing injection pump. thank you so much. amazing vid.
Bos Tanong lang ako kc po ayaw po pumanik sa masbosster flued galing po sa baba
Thank you for sharing this
Please post a video in man tga valve clearance adjust
Ok sir.but this time im very bz in small cars
Bos pwede po ba ako magtanong kc yong trak na unit na Kasama ko po hndi po magawagawa ayaw po kc pumanik ang flued sa masbosster galing baba po ano kaya pwede sulostion dto
Love you sir
How are you sir
Hi bro how are you
I have man TGA 41.400 vehicle. There some fault code(EDC Diagnosis 03781-01) is coming and at the same time the black smoke also coming from smoke silencer. Please Can you give me some solution for that and what I have to do for that problem
Hi sir,please check this video link.
ruclips.net/video/aB9CbN4E0wA/видео.html
@@jlcworkshop yeah I sea your video then I changed that sensor also but there is no changes in problem
Kuya me TGA ayaw mag start dati naman umaandar,me cranking naman. Nag open ako ng high pressure line ng injection pump walang fuel,me shut off valve pa ba ito?
Palitan mo sir ng metering unit.o d kaya ipump mo muna check ng fuel kung may napasok bang supply.
Ay injection pump pala yan sir?kahit ba i manual pump ayaw parin mag andar?.yobg isa kasing nakausap ko ganyan din problema ayaw umandar pero kapag minamanual pump naandar daw saglit pero namamatay din.sabi ko palitan ng fedpump.ng pinalitan nya umandar na
Bagong palit na po manual pump pati fuel filter pinalitan na po,pag nag pressure na manual pump me parang release ng pressure sa injection pump pero pag kina crank walang fuel na lumalabas
@@greenarrow1922 check mo sir itong link baka ganito ang problema nyan
ruclips.net/video/hPA0LxK_G2E/видео.html
@@jlcworkshop sige check ko, salamat po
i like the video
Thank you Sir
Nice
Boss ilang higpit po connecting rod at cylinder head po
Ganyan ba ang makina mo sir?o yong commonrail?
Opoh sir injection pump kasu doble ung cylinder head ung compresor at devider ung cylinder head ng makina nia binaklas kc i2 ng ibang lahi dna tinuluy bka po pwd makahingi ng ideya sainyo
Pwd b kta add sa fb para isend k mamaya ung picture ng makina sir
Sa ganyan na makina D2676.
Crankshaft bearing caps= 315nm+90°
Conrod bearing cap 100nm+90°
Head 300nm +90°+90°
Ano fb mo sir
Super
Thank you sir.how are you
Can you help me i have problems in man tga 16.360
Code
Edc 00833
Hello sir,EDC 00833-ROCK SENSOR
i never experiencd this kind of trouble yet,but this is in the injection pump.can you check firts the cable wire connection or check this link.Hope it will help thanks.
ruclips.net/video/hPA0LxK_G2E/видео.html