WOW.. what a great project.. great to have equipments such as 3D printer ( I believe are still expensive) and the spot welder for the batteries.. I wish I have those too..
There is many cheap 3D printers and it work good enough for this kind of projects. Yes, it will print 2x more time than 20h but anyway you will have your parts. FOr batteries there is cheap welding machine. And most cheap option - regular soldering iron 80-100W and soldering fast. Do that many time and all work perfect.
@@LionPlush That 3D printer did the whole thing in about 16 hours, so having a printer that will take >24 hours... might as well just make your own enclosure out of wood or something else, and add a vinyl wrap around the outside. I was always told soldering batteries was not good, because it heats up the battery which is bad... Yes it is possible but not ideal!
@@TheSpotify95 yes, box possible make many ways. But anyway slow 3D printers cost not much. And yes, weld batteries better but if you not have a welder - soldering fast with powerful solder iron work good too and whole batteries not heat, just local contacts.
Great bluetooth speaker... shame there's no way to also be able to use the AUX port on the amplifier board (I know a lot of phones/tablets don't have this anymore but it is still a nice feature). Also can't believe how much stuff you have lying around in your workshop for projects like these... :D If I did this then I would have to hand-make my enclosure as I don't have a 3D printer, nor do I have a spot welder for batteries...
can you make a flat frequency response speaker like hifi where after you make it, you show all the frequency response graphs, ecc? no one makes these types of diy speakers
I have a question you can make a handheld vacuum cleaner and a blower, for example for leaves or inflating mattresses??? I would love to see your project and film ❤
If you mention the circuits name, that will be more easier for understand, what you are using? Best of luck. I love your channel and your hardwork ❤️ Keep going ❤️
I am going to finally try and build one of your projects. Thank you. Cheers! Cuối cùng tôi sẽ thử và xây dựng một trong những dự án của bạn. Cảm ơn. Chúc mừng!
Gooday mr. KST, i would like to know if is it possible me to know how to purchase the BMS with Balancer you use from your previous videos, Im open for a conversation. because we can't access here in the Philippines your Online Shop
*_Why doesn't the channel's author answer his subscribers' questions? And the Bluetooth speaker turned out so-so. There is no speaker grille. There is no handle for carrying the speaker. The board with a woman's voice inside is annoying. Sorry for the criticism, but I say what I see._*
Creative Channel has so many details that it will be enough to voice the entire village and still have some left over 😅
I really like watching DIY clips.😅
WOW.. what a great project.. great to have equipments such as 3D printer ( I believe are still expensive) and the spot welder for the batteries.. I wish I have those too..
There is many cheap 3D printers and it work good enough for this kind of projects. Yes, it will print 2x more time than 20h but anyway you will have your parts. FOr batteries there is cheap welding machine. And most cheap option - regular soldering iron 80-100W and soldering fast. Do that many time and all work perfect.
@@LionPlush That 3D printer did the whole thing in about 16 hours, so having a printer that will take >24 hours... might as well just make your own enclosure out of wood or something else, and add a vinyl wrap around the outside.
I was always told soldering batteries was not good, because it heats up the battery which is bad... Yes it is possible but not ideal!
@@TheSpotify95 yes, box possible make many ways. But anyway slow 3D printers cost not much. And yes, weld batteries better but if you not have a welder - soldering fast with powerful solder iron work good too and whole batteries not heat, just local contacts.
Great bluetooth speaker... shame there's no way to also be able to use the AUX port on the amplifier board (I know a lot of phones/tablets don't have this anymore but it is still a nice feature).
Also can't believe how much stuff you have lying around in your workshop for projects like these... :D
If I did this then I would have to hand-make my enclosure as I don't have a 3D printer, nor do I have a spot welder for batteries...
can you make a flat frequency response speaker like hifi where after you make it, you show all the frequency response graphs, ecc? no one makes these types of diy speakers
Your video is beautiful and best wishes for you
Как всегда - Молодец!!! Удачи!
How can i buy one from you
You should add protective, lightweight grill on speakers for protection.
I have a question
you can make a handheld vacuum cleaner and a blower, for example for leaves or inflating mattresses???
I would love to see your project and film ❤
If you mention the circuits name, that will be more easier for understand, what you are using?
Best of luck. I love your channel and your hardwork ❤️
Keep going ❤️
I am going to finally try and build one of your projects. Thank you. Cheers!
Cuối cùng tôi sẽ thử và xây dựng một trong những dự án của bạn. Cảm ơn. Chúc mừng!
I like it, but not the Bluetooth receiver used, it doesn't match the casing almost perfectly
Show👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻esse trabalho ficou sensacional, parabéns
That's good I loved it ❤😊 your next project make a high beam torch 🔦 with bamboo lab
Cool ta vidéo
I never seen like this sir you are genious 😎😎😎❤❤respect
sir i have some questions 1 what is your designing software
O cara é muito bom
Chào buổi sáng, tôi vừa xem video về loa Bluetooth DIY và tôi tò mò không biết bạn sẽ làm gì với chiếc hộp bị lỗi in ấn
Bạn có thể lắp ráp nó và gửi nó đến Brazil không, tôi rất hâm mộ tác phẩm của bạn!!!
Im waiting for a diy UFO video
Bcz this man has everything in his workshop 😅😅😅😅
Gooday mr. KST, i would like to know if is it possible me to know how to purchase the BMS with Balancer you use from your previous videos, Im open for a conversation. because we can't access here in the Philippines your Online Shop
What's. with the creepy coke nail? Does it pit the lotion om it's skin, or does it get the hose again???
That's his booger picker
Master geniuuuuuussss!!!!!always for more!!!!excelente very pretty!!!!🎉🎉🎉🎉🎉🙌🙌🙌🙌🙌💪💪💪💪🔈🔉🔊
Big fan from india brother❤❤❤❤❤❤❤❤
what a nice bluetooth speaker.....i ❤ it
Mantap bang
Good job
I think put holes to good Bluetooth connection
dang!! bro has a stock of JBL BB3s and Wuzhi amps
if only i had a 3d printer
😊
Mmm nice
😊❤
fan from philli
pines
How much rupees
How much rupees and how much dollar in
This time it didn't work for you, it sounds like I put my head in a plastic can.
WOWWWWW
สวัสดีครับ
LINK STL ?
asi le pregunte en otro video y solo me dio like
y no dio ningun stl 🤷♂🤷♂😏😏
Dreem room.
❤️🇧🇩
Hello
The moment I see computer and a 3D printer that make me lose interest in this diy 😅..not all have that's
👍👍❤❤😊
Hey i am the 1st viewer today 😂❤
bana o yaptığını gönderir misiniz ?
*_Why doesn't the channel's author answer his subscribers' questions? And the Bluetooth speaker turned out so-so. There is no speaker grille. There is no handle for carrying the speaker. The board with a woman's voice inside is annoying. Sorry for the criticism, but I say what I see._*
idgaf
Why do you need handle on Bluetooth speaker? For the carrying the speaker through the town with full volume? 🤣
you have to cut your nails it looks bas
Kok saya mau koh
새끼손톰좀.....제발
bass =0
🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿
Second view today
First 🎉
4 th comment
Second❤❤ view
kst name look not wow
How much rupees