Tutorial Inventor - 051 SPIGOT (Part-011)
HTML-код
- Опубликовано: 6 мар 2020
- Every tutorial brings new abilities.
You can slow the film on RUclips by using the Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
IMPORTANT (Romanian) - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.com/store/books/c...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/constantin.stancescu
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
MISTAKE: My friend Thai Binh Nguyen has observed my mistakes starting at minute 6:12 when I consider radii instead of diameters, and this creates a wrong conicity for the holes. Thank you Thai for your observation!
Download assets from www.fastgrup.ro/tutorials 
Наука
2 missed dimension are center line positions of two horizontal conical holes (they have formulas at the ends).
Yes, my friend, you are right: dimensions 5 and 8 from the drawing are missing.
Thank you
I assumed this error at the minute 17:27 of the next tutorial (No. 52)
Buna ziua ,
Este vorba despre cotele pe care nu le-ati pus si ne-ati atras atentia la finalul tutorialului "HIGH STAND"( adica urmatorul dupa acesta).
Cota de 5 se aflta intre linia de centru a lui " Ø 2 taper 1:40" si varful
piesei iar cea de 8 se aflta intre linia de centru a lui
"Ø5 taper 1:50" si capatul de jos al piesei .
Multumesc !
" Ø 2 taper 1:40" rectific " Ø2 taper 1:50"
BRAAAVO Alin! You are right: if one is looking at the SPIGOT drawing find two dimensions (5 and 8) which are nowhere placed in the film! Your prize is the PDF variant of the Album!! Send me your e-mail address and you'll receive the ALBUM! (find my address at the beginning of the film)
Mr. Sir, You made a mistake when calculating the slope; the parameters a and c on the below formula (c=a+L*k) are diameter, but you placed the radius on the video at minute 13:17. Can you check again?
I verified and you are right - see the mention in the description of this tutorial. Thank you my friend!
Hello Professor, thank you very much for your higher education.
I learn very valuable lessons from your teaching, and I am always grateful to you, Professor.
But there is a mistake in the formula 'c = a + L / 50', because this formula calculates the radius, but in the picture, it shows the diameter, and this is wrong.
The correct formula should be replaced with c = a + 2 * (L / 50) to calculate the diameter, thank you.
If you read the description you see that I mentioned this mistake.
You are very welcome!