For people having BOOTLOOPS, you could try "fastboot format cache" and "fastboot format userdata" after the erase commands. To open the App Drawer, go to settings by swiping down on your main screen and enable wrist gestures. Then just shake your wrist back and forth to open the app drawer.
First time you boot it up you might get a bootloop, as suggested in the XDA thread, you can hard reset it by holding down the power button and then leaving it for a good 5+ minutes to boot up. Hope it works out :)
Just did it, only the rooting method I needed was a bit older, but it worked. After install it will indeed take some time to boot. Just give it 10 to 60 minutes to boot. Took about 15 with mine.
This worked and was really easy, just do this after, run: *Fastboot format cache* *Fastboot format userdata* and it may work after about 50 minutes of loading. But some people said it didn't work at all, so I'm not sure if they didn't wait long enough, or they just couldn't get it to work.
Thanks for this video! Worked great. If you are having an error while running the 2 commands in the pinned comment, try the fastboot from RootJunky's G Watch tool zip.
**Edit: figured it out. After looking around XDA the little power button on the back operates as your home button.** Great job! Got everything to flash Google play working etc. I just can't dismiss the tutorial notification! It says "Tutorial - press power button to go back to watch face" but I obviously don't have a power button. Tried restarting and swiping every direction but it won't go away! I'm sure it's something stupid I'm not seeing/doing. Thanks for your work and your help
Before completing the tutorial you could also go to settings (via the quick settings shade) and enable wrist gestures. Shaking your wrist registers as the home button :)
I'm so glad that people figured out how to do this sort of thing because I stopped using my g watch cause it wasn't going to get AW2. Now I'm going to use it a lot more. Right now it's in the first boot so I'm just waiting for it to finally go, anyway thanks for the simple and easy video! (could've helped it you went a little slower :)
Only took 2-3 minutes for it to boot for me. Does anyone know if it gets any updates to the watch after this? Also, has anyone figured out how to get past the "press the power button to go to the watch face" thingy?
Also you should probably add this in a comment or something, most people doing this that are having issues from the first step probably havn't unlocked the watch. i had to google it. turns out you have to put this into the cmd "fastboot oem unlock"
Now that this is installed...HOW IN THE WORLD CAN I install other apps...the os wear crap doesn't do jack and is prompting for a web browser when I try to go to other watch faces..
i followed the steps you did in the videos. windows cmd went OKAY without any error but after last fastboot reboot, my watch rebooted but it stucks in loading , i mean the booting menu that appears before the android wear menu. what can i do ? i waited for 2 hrs. but nothing happended. pls help me
FOR LG G WATCH BOOTLOOP FIX. It's really simple - just install as above then follow the instructions below before you reboot. 1- in the command line type ( fastboot-w ) without the brackets and hit enter. 2- Then type ( fastboot reboot ) then hit enter. Done.
Ok so I'm in the Minimal ABD and fasboot window, my watch is unlocked and when I drop the boot.img in the window it say : "unknown partition" blablabla\boot.img "error : cannot determine image filename for blablabla\boot.img Please help :'(
I did everything right my bootloader is unlocked, I enabled ADB USB debugging, I'm in fastboot mode but when I type fastboot devices in minimal ADB nothing shiws up. What's the issue ? is there some drivers to install in order for my pc to recognize the watch ?
Hi, I did follow this guide 2 years ago to update my watch and it worked perfectly. But now I have a new PC, and it doesn't recognize my watch neither in adb nor in fastboot mode. I have the minimal adb and fastboot program installed, and I tried to install the Lg g watch drivers from the Lg g watch tool on XDA, but without any success (when installing the Universal adb driver, I can't complete the process because my watch can't be recognized). I don't know what to do, I tried everything apart from formatting my watch
BOOTLOOP FIX. It's really simple - just install as above then follow the instructions below before you reboot. 1- in the command line type ( fastboot-w ) without the brackets and hit enter. 2- then type ( fastboot reboot ) then hit enter. Done.
I just bought LGW100 and I can't get it to connect to the internet when paired with my android mobile, and it came with android wear app, I wounder if it has anything to do with changing the app name into wear OS, Please help..Thank you
My system cannot find any device. It says waiting for any device. I enabled debugging through USB on watch and downloaded the software and driver for my system. Can anyone help me?
It might be the connectors on your cradle. Sometimes if the watch doesn't sit firmly on the cradle, the pins momentarily lose contact and the flashing fails.
@@PearCrew thanks for the reply as i manage to sort it out and software running perfectly....it was the cradle and cleaned off both pins on watch nd dock and worked perfectly after that....thanks big ups
Thank you SO much! I got it working and connected to my iPhone. How did you get the Google Play store working? Whenever I try to open the play store it asks me to connect to a network, but as far as I know the LG G Watch doesn't support Wi-Fi.
For all those stuck in bootloop just leave fastboot and enter recovery and wipe and reset from there then power off and go back to fastboot and flash with the wear 2.0, that worked for me after I though the watch was done for.
Hem, why when i try to install "boot.img" Minimal ADB say to me "image is not a boot image" ?? I'm confused and the result is that my watch is stuck on lg logo
great video, everything worked flawless.. exept I got stuck in a bootloop, tried to format cache and userdata aswell as normal method, nothing worked... :( what should I do now? UPDATE: everything was fine it just took over 10min to boot
Hi Im mohsen from iran. Thanks for the video got boot loop here But handled Its run android wear 2.0 now But i cant connect to google account through my phone (lg g6) Im try with and without vpn to connect But its not connecting Plz help me Waiting for your help... Thanks a lot...
I'm having a question: How do you deal with the fact that LG g watch doesn't have a button? I mean I am using shake gesture to use that thing but can I add gestures just like in earlier versions or maybe a virtual button? Thanks anticipated.
I'm sorry as far as I know aw 2 doesn't have custom gestures. For adding a virtual button you could check the XDA forums, perhaps someone's already done it there :)
Some G Watches have their pins worn out (mine included) so make sure your watch is sitting well in position in its cradle. Else it might be a driver problem, so you might have to reinstall the G Watch and ADB drivers. Hope your issue gets resolved fast :)
Pear Crew I was able to solve this by changing the pc I was working on. Now I'm facing an issue many are facing...getting the google account added to the watch. It's just a watch now. Not a smart one :p
Try using "fastboot format cache" and "fastboot format userdata" after the erase commands, some people got it working this way. Hope your watch boots up now :)
+Knirpsfiedel 200 It probably means that you don't have the lg g watch drivers installed, or that the watch isn't connecting to the PC (sometimes the pins get worn out, make sure its connected correctly) or that the watch isn't in fastboot mode. Hope this helps with troubleshooting :)
ok, did it, send system, but stuck in boot loop, i disconnected the watch and pressed the little button underneath the display (at the loading ports) it is booting up but again stuck in boot loop, when i connect it then my pc doesnt make a sound and when i type: adb devices ,it says: list of devices attached, the watch doesnt show up... i need help with this, its very important!
Can someone write down everything I need to do in an exact order to avoid a bootloop and still get Android Wear 2.0? Any help will be appreciated as this is really confusing.
www.google.co.uk/amp/s/forum.xda-developers.com/g-watch/general/tutorial-avoid-bootloop-porting-wear-2-0-t3656825/amp/ I found this after I finished my watch. I followed this video though. I've just finished mine and it's booting up still. Been on 5 minutes at the moment so hoping it's not gone into a boot loop. However if it has I'm going to use that link.
@@kananwest3986 left my watch overnight and was in bootloop. I've just followed the link and followed the steps and installed TWRP on my watch too. How long did yours take to boot back up again? I haven't put on 2.0 yet
@@WillCloughs101 If you follow the steps to the letter and as accurately as you can, it should take less than 30 minutes. Mine took about 15-20 minutes but one thing you *must* do is plug it in to a charger that *isn't* connected to your computer. Make sure the watch is plugged in to a power outlet while it boots up after following the instructions. The first time I tried to use the link in the comment above, it didn't work. This is because I didn't have the ADB drivers installed onto my computer. When using the link to install the ADB drivers, click the link to download it that says 'if top one does not work'. Install all the drivers and do that before you follow the rest of it. Hope this helps!
+Saniikes This happened to me as well the first time I did it, I reflashed wiping caches and userdata as showed in the video and everything went smoothly then :)
Don't try this. At all. Apparently, there's a very high risk of bootloop, and if you don't know what you're doing... You'll get stuck. If you have an old LG G and time to blow, go ahead ;D
Actually the chance is quite low - even if you run into a bootloop just restart the watch and it will boot and even if that fails, going back to stock isn't a hard process. So I'd say bricking your watch doing this is fairly hard xD
@@PearCrew out of those 35K people probably 30K stuck their devices on bootloop because you cant format whats not there and it says cant create image chen trying to do command format cache or userdata because there is none.
Have you installed the G Watch drivers? If not this tool could help out (forum.xda-developers.com/g-watch/development/script-lg-g-watch-tool-t2820863) Good luck :)
Pear Crew okay, hi! I did everything, it worked!! Thank you very much!! But i cant go into playstore (my phone has wifi connection) on the watch it says to check the connection and try again, do i have to press sth? Mayby because i installed a newer version of the system (by the same developer but not from the 26.07 but from the 1.08 (day, month)
For people having BOOTLOOPS, you could try "fastboot format cache" and "fastboot format userdata" after the erase commands. To open the App Drawer, go to settings by swiping down on your main screen and enable wrist gestures. Then just shake your wrist back and forth to open the app drawer.
Thanks for the video! Booting now :D
Edit: Bootloop... Crap...
Same I'm getting boot looping. No Idea what went wrong.
First time you boot it up you might get a bootloop, as suggested in the XDA thread, you can hard reset it by holding down the power button and then leaving it for a good 5+ minutes to boot up. Hope it works out :)
Jacob Witt
I got it working. Try this instead:
Fastboot format cache
Fastboot format userdata
Thanks! The "fastboot format cache" and "fastboot format userdata" were the only thing that stopped the bootloop for me as well.
Just did it, only the rooting method I needed was a bit older, but it worked.
After install it will indeed take some time to boot. Just give it 10 to 60 minutes to boot. Took about 15 with mine.
please help me. i did it properly. but bootloading going on and doesn stop. pls help
This worked and was really easy, just do this after, run:
*Fastboot format cache*
*Fastboot format userdata*
and it may work after about 50 minutes of loading. But some people said it didn't work at all, so I'm not sure if they didn't wait long enough, or they just couldn't get it to work.
Cory Mck almost an hour, but didn't boot'm up fully. Booting booting and still booting, what can i do now?
What have you done yet I have the same problem
Thanks for this video! Worked great. If you are having an error while running the 2 commands in the pinned comment, try the fastboot from RootJunky's G Watch tool zip.
This worked great, thank you! For the people trying to access the Google Assistant, you need to turn on "Ok Google" detection in settings.
To solve the boot loop problem, go to recovery and wipe format on the watch itself, then enter Fastboot again and flash the ROM. It works 100%
I will follow your instructions. After flashing the ROM, what should I do?. Thank you for your answer
**Edit: figured it out. After looking around XDA the little power button on the back operates as your home button.**
Great job! Got everything to flash Google play working etc. I just can't dismiss the tutorial notification! It says "Tutorial - press power button to go back to watch face" but I obviously don't have a power button. Tried restarting and swiping every direction but it won't go away! I'm sure it's something stupid I'm not seeing/doing. Thanks for your work and your help
Before completing the tutorial you could also go to settings (via the quick settings shade) and enable wrist gestures. Shaking your wrist registers as the home button :)
I'm so glad that people figured out how to do this sort of thing because I stopped using my g watch cause it wasn't going to get AW2. Now I'm going to use it a lot more. Right now it's in the first boot so I'm just waiting for it to finally go, anyway thanks for the simple and easy video! (could've helped it you went a little slower :)
Only took 2-3 minutes for it to boot for me. Does anyone know if it gets any updates to the watch after this? Also, has anyone figured out how to get past the "press the power button to go to the watch face" thingy?
Also you should probably add this in a comment or something, most people doing this that are having issues from the first step probably havn't unlocked the watch. i had to google it. turns out you have to put this into the cmd "fastboot oem unlock"
+Michael Draper Happy flashing man. Advice noted ;)
for the people booting straight into their bootloader, teamwin TWRP or else...... use " fastboot continue "
at which point?
You saved me!!!
Stuck at the android wear logo for 30 minutes. Tried again with formating cache and userdata but im getting error cannot generate image...
did you find a solotuion?
Will this help me use Facer? And can this be done with a raspberry pi pc?
Now that this is installed...HOW IN THE WORLD CAN I install other apps...the os wear crap doesn't do jack and is prompting for a web browser when I try to go to other watch faces..
Im currently waiting on spinning circles after rebooting and installing 2.0 for 30min and nothing happens...
how did you resolved?
@@85obbetto not worth update. You need to have button on watch tfor 2.0 to be functional
i followed the steps you did in the videos. windows cmd went OKAY without any error but after last fastboot reboot, my watch rebooted but it stucks in loading , i mean the booting menu that appears before the android wear menu. what can i do ? i waited for 2 hrs. but nothing happended. pls help me
Very late reply, reboot it
FOR LG G WATCH BOOTLOOP FIX.
It's really simple - just install as above then follow the instructions below before you reboot.
1- in the command line type ( fastboot-w ) without the brackets and hit enter.
2- Then type ( fastboot reboot ) then hit enter.
Done.
I know I'm too late, but is it alright that Wear OS app just crashed after the connection?
can you make a video on how to go back to stock?, like the firmware that first comes with the watch
I'm stuck at "sending boot". The watch says "downloading" but it doesn't seem to be doing anything. It's not writing anything.
Ok so I'm in the Minimal ABD and fasboot window, my watch is unlocked and when I drop the boot.img in the window it say :
"unknown partition" blablabla\boot.img
"error : cannot determine image filename for blablabla\boot.img
Please help :'(
but a space between the command and the file you dropped
Thank you this helped me fix mine it was stuck at the boot screen.
how could i downgrade it back to original....my watch is stcuk on boot logo😭😭😭😭
to eliminate lag set animation from x1 to x1.5, works for me
I did everything right my bootloader is unlocked, I enabled ADB USB debugging, I'm in fastboot mode but when I type fastboot devices in minimal ADB nothing shiws up.
What's the issue ? is there some drivers to install in order for my pc to recognize the watch ?
im stuck on a bootloop and I cant get out of it any idea why ?
Hi, I did follow this guide 2 years ago to update my watch and it worked perfectly. But now I have a new PC, and it doesn't recognize my watch neither in adb nor in fastboot mode. I have the minimal adb and fastboot program installed, and I tried to install the Lg g watch drivers from the Lg g watch tool on XDA, but without any success (when installing the Universal adb driver, I can't complete the process because my watch can't be recognized). I don't know what to do, I tried everything apart from formatting my watch
BOOTLOOP FIX.
It's really simple - just install as above then follow the instructions below before you reboot.
1- in the command line type ( fastboot-w ) without the brackets and hit enter.
2- then type ( fastboot reboot ) then hit enter.
Done.
I just bought LGW100 and I can't get it to connect to the internet when paired with my android mobile, and it came with android wear app, I wounder if it has anything to do with changing the app name into wear OS, Please help..Thank you
and how do i use it? it asks to press the home button, where is it?
Hey! How do you finish the tutorial when it says "press power button to go back to watch face". It is annoying that the thing is always there
my watch stopped in android wear logo and stay in this step , i install many rom , no results , im installed asteroid os but bluetooth not working
Tutorial was perfect just be patient when it is booting Wear OS.
My booting since i given command fastboot reboot...when it will be on..? Can any one help me..
@@jigarchandarana179 hi, me too. after the last teboot, my watch stuck in loading. What did you do at that moment? Could you please help me?
My system cannot find any device. It says waiting for any device. I enabled debugging through USB on watch and downloaded the software and driver for my system. Can anyone help me?
Hi there i followed all steps but when fastboot flash boot/sytem then it says failed but when i erase cache and userdata it works....please help
It might be the connectors on your cradle. Sometimes if the watch doesn't sit firmly on the cradle, the pins momentarily lose contact and the flashing fails.
@@PearCrew thanks for the reply as i manage to sort it out and software running perfectly....it was the cradle and cleaned off both pins on watch nd dock and worked perfectly after that....thanks big ups
Thank you SO much! I got it working and connected to my iPhone. How did you get the Google Play store working? Whenever I try to open the play store it asks me to connect to a network, but as far as I know the LG G Watch doesn't support Wi-Fi.
On Android, it's able to access the internet through the phone's connection, don't know if the same goes for iPhones though.
Hi, I have to root before do all this process?
For all those stuck in bootloop just leave fastboot and enter recovery and wipe and reset from there then power off and go back to fastboot and flash with the wear 2.0, that worked for me after I though the watch was done for.
Please, help, how you did that?
Great thanks, can't wait to try.
Is there a demo video anywhere?
There is now :D ruclips.net/video/fX3no2vfU6o/видео.html
My watch is boot loading since 1 hr...what should i do or just wait...?
Hem, why when i try to install "boot.img" Minimal ADB say to me "image is not a boot image" ?? I'm confused and the result is that my watch is stuck on lg logo
hii i stuck in fastboot flash boot boot.img and for system too its shows max-download-size failed please advice
Could anyone who's running 2.0 tell me how their battery life has changed? Or has it stayed the same?
im trying now , seems it has staying the same (sorry im italian)
Miguel Valdovinos it's ok thanks!!
great video, everything worked flawless.. exept I got stuck in a bootloop, tried to format cache and userdata aswell as normal method, nothing worked... :( what should I do now?
UPDATE: everything was fine it just took over 10min to boot
was getting scared, i suppose i'm gonna take a caffè
bro how can i make it as default .i dont want this update .how can i get my old version
Thank you very much for this helpful video!
Also, is it safe to use the bootloader unlocking tool to root the watch afterwards?
You could flash TWRP recovery and flash magisk from there as far as I know, I recommend checking the forum posts for more details :)
Hi
Im mohsen from iran.
Thanks for the video
got boot loop here
But handled
Its run android wear 2.0 now
But i cant connect to google account through my phone (lg g6)
Im try with and without vpn to connect
But its not connecting
Plz help me
Waiting for your help...
Thanks a lot...
dabsh can i ask how yo fix bootloop?
how back to factory wear ?
I'm having a question:
How do you deal with the fact that LG g watch doesn't have a button? I mean I am using shake gesture to use that thing but can I add gestures just like in earlier versions or maybe a virtual button? Thanks anticipated.
I'm sorry as far as I know aw 2 doesn't have custom gestures. For adding a virtual button you could check the XDA forums, perhaps someone's already done it there :)
lg g watch have button. a little one. on the back the metal little hole is a button.
Shall I need to connect my LG G W100 to my computer directly without android mobile phone?
Both flashes failed for me "Cannot determine image filename for Boot C
my watch came with asteroid OS would i have to do anything different
No, just follow from the point where you boot into fastboot. Happy flashing!
i have tried every thing to fix the bootloops and nothing works i tried the format commands and it still doesn't work. What do you recommend?
Check the xda forum post for updated instructions. Hope you manage to get it booting!
@@PearCrew do you have a link?
Helloo my watch is dead
What about battery life with Wear 2.0 in this Watch?
+Markus Krumminga For me it's the same as AW 1.5 :)
Stuck at 'sending 'boot' (15204 KB)...'
Tried different USB ports, but no luck. Any ideas?
Some G Watches have their pins worn out (mine included) so make sure your watch is sitting well in position in its cradle. Else it might be a driver problem, so you might have to reinstall the G Watch and ADB drivers. Hope your issue gets resolved fast :)
Pear Crew I was able to solve this by changing the pc I was working on. Now I'm facing an issue many are facing...getting the google account added to the watch. It's just a watch now. Not a smart one :p
with iphone, i couldn’t access internet on the watch, anytime it asks to connect to wi-fi even the watch has no wifi
when i wrote fast boot it doesnt say any thing
I cant use fastboot format userdata, I always get "error: Cannot generate image for cache" error :(
I'm stuck in a bootloop and I can't do anything. when I type fastboot format cache it says waiting for device and nothing happen. what can I do ?
same here
You have to put it in fastboot mode first. Reboot the watch witch the back reset button. User the swipe to show fastboot menu. Run commands.
got any answer ?
m also in same problem
can you figured it out ?
Is it possible for asus zenwatch 1?
If you release a new update, can i update through fastboot without erasing data again???
I believe so, but I guess ab123321 at XDA can better answer that questoon. :)
Im stuck in boot, its been booting for 25mins still nothing
Try using "fastboot format cache" and "fastboot format userdata" after the erase commands, some people got it working this way. Hope your watch boots up now :)
Please make a demo video so I can decide if I want to do this or not!
Hope you enjoy it :) ruclips.net/video/fX3no2vfU6o/видео.html
@@PearCrew
.
i have typed "fastboot format cache" and "fastboot format userdata" , but still boot loop , anyone can help ?
The link for Minimal ADB and Fastboot is gone. Is there another place we can get it from?
Yes, you can get it here: forum.xda-developers.com/showthread.php?t=2317790
My watch is not getting started it is loding only
Can i do this on my samsung gear live?
+Arun Chauhan You can port aw2 to the gear live if you have the knowledge but no you can't use the exact same files for the GL.
How long on average does it take to boot?
After the first time, a few seconds :)
If boot takes too long (>15 min) the first time, reset the watch using the button on the back
What I need download in the first link? Can someone tell me?
Thank you Great Video
thanks for easy guide
will this work on G watch R
G watch r already runs on 2.0
thanks for this!
You're welcome man! :D
when i type fastboot erase cache, then it says waiting for device, what can i do to it?
+Knirpsfiedel 200 It probably means that you don't have the lg g watch drivers installed, or that the watch isn't connecting to the PC (sometimes the pins get worn out, make sure its connected correctly) or that the watch isn't in fastboot mode. Hope this helps with troubleshooting :)
ok, did it, send system, but stuck in boot loop, i disconnected the watch and pressed the little button underneath the display (at the loading ports) it is booting up but again stuck in boot loop, when i connect it then my pc doesnt make a sound and when i type: adb devices ,it says: list of devices attached, the watch doesnt show up... i need help with this, its very important!
Screen has not working pls help me
How to get back to old version
You can take a look here: forum.xda-developers.com/showthread.php?t=2796326
Forget what I said it just took a little time but I got it to start
Glad it worked for you man. :)
how long did it take?
Thank you
does it work on mac?
Yes, the adb and fastboot commands used can be issued from a Mac!
@@PearCrew can you reccomend an adb fastboot for mac?
@@T0bias. You can follow these instructions here: www.xda-developers.com/install-adb-windows-macos-linux/
Can someone write down everything I need to do in an exact order to avoid a bootloop and still get Android Wear 2.0? Any help will be appreciated as this is really confusing.
www.google.co.uk/amp/s/forum.xda-developers.com/g-watch/general/tutorial-avoid-bootloop-porting-wear-2-0-t3656825/amp/
I found this after I finished my watch. I followed this video though. I've just finished mine and it's booting up still. Been on 5 minutes at the moment so hoping it's not gone into a boot loop. However if it has I'm going to use that link.
@@WillCloughs101 Yeah, if you get stuck in a bootloop use that. That's what I did and the watch has been running fine for about 3 weeks.
@@kananwest3986 left my watch overnight and was in bootloop. I've just followed the link and followed the steps and installed TWRP on my watch too. How long did yours take to boot back up again? I haven't put on 2.0 yet
@@WillCloughs101 If you follow the steps to the letter and as accurately as you can, it should take less than 30 minutes. Mine took about 15-20 minutes but one thing you *must* do is plug it in to a charger that *isn't* connected to your computer. Make sure the watch is plugged in to a power outlet while it boots up after following the instructions. The first time I tried to use the link in the comment above, it didn't work. This is because I didn't have the ADB drivers installed onto my computer. When using the link to install the ADB drivers, click the link to download it that says 'if top one does not work'. Install all the drivers and do that before you follow the rest of it.
Hope this helps!
it does not reconize my G watch
Have you installed the adb drivers and enabled adb from the watch settings?
How can I return to android 6?
You can find the images of the previous aw on xda :)
how do you unlock the watch?
Pear Crew. I can not get my pc to recognize the watch. I'm assuming this is because it is in lock state.
I know how to unlock the screen :)
OK make sure you have the drivers installed and search the XDA developer forums of the G Watch for bootloader unlocking. Good luck!
What happens if I power it off?
Hey , is there any way to install 2.0 on sony smart watch 3????
my watch keeps booting back into fastboot menu.
Mr Happy Did you ever figure out how to fix the issue?
Yes, I re installed and everything
А русской версии видео нету?
DrinK Нет, хотя разработчик Русский.
:(now it is in continuous in booting mode ........
+Govind Soni You can try forcing it to reboot from the reset switch. But don't worry the boot process is long by itself (10+ minutes)
My watch is just stuck at the watch face after flashing.
+Saniikes This happened to me as well the first time I did it, I reflashed wiping caches and userdata as showed in the video and everything went smoothly then :)
Pear Crew So It won't connect to the computer, so i wait til it dies to go into flashboot to wipe?
Sorry for the late reply, you could shut it down using a needle on the reset button. Hope it worked out for you :)
Pear Crew I managed to fix it, i had to update my android app and the reset button did work.
Top
Gear 2 neo pls
No find the device!
ZLY first you have too unlock it (root)
Don't try this. At all. Apparently, there's a very high risk of bootloop, and if you don't know what you're doing... You'll get stuck. If you have an old LG G and time to blow, go ahead ;D
Actually the chance is quite low - even if you run into a bootloop just restart the watch and it will boot and even if that fails, going back to stock isn't a hard process. So I'd say bricking your watch doing this is fairly hard xD
@@PearCrew out of those 35K people probably 30K stuck their devices on bootloop because you cant format whats not there and it says cant create image chen trying to do command format cache or userdata because there is none.
when I finished coding and reboot my device loading for many hours what should I do??
Try restarting it using the reset button.
Pear Crew I had do this but it dont works
Pear Crew thank you i had do it twice and its work
when i connect it to the pc it doesnt show up, what can i do?
Have you installed the G Watch drivers? If not this tool could help out (forum.xda-developers.com/g-watch/development/script-lg-g-watch-tool-t2820863) Good luck :)
ok so, when i type fastboot erase cache, then it says waiting for device, what can i do to it?
wait, i formated the cache and userdata, trying again
Pear Crew okay, hi! I did everything, it worked!! Thank you very much!! But i cant go into playstore (my phone has wifi connection) on the watch it says to check the connection and try again, do i have to press sth? Mayby because i installed a newer version of the system (by the same developer but not from the 26.07 but from the 1.08 (day, month)