Great video! That heavy spring feel probably loosens up after a couple hundred hours of racing I bet. There is typically some breaking in period required. In the past i have used a lot of RC car and truck springs and dampers to smooth out some of the progressiveness of these types of springs. They're cheap and effective and I have had pretty good luck with it
I just got mine. Got it for my r3 pedals. Cant really use it as its too stiff to be used on the floor. It needs to be bolted to a rig to get the best feel
I’m going to buy a Moza R5 bus I play with a desk, I’m coming from the G29 and I wonder if I can still be competitive in braking without the spring? I also use an office chair…
@@Max10294 i'll tell you that the stock logitech pedals feels 100 times better than the stock r5 ones you just have no guide it's like driving a car with air in the system 😂
@@dannyleeracing Thank you! I on PC. But I afraid some telemetry might get lost (because Fanatec Base sends some telemetry to ClubSport Pedals V3 for "ABS brake vibration" and "Throttle vibration" effects). But "MOZA SR-P Pedals" don't supports these effects, so, pehaps all good. Sorry, I'm just getting started.
My pedals would be going under my desk and pressed up against my PC on the carpet, and the PC is against a wall. Is that enough resistance to stop the pedals from moving? Or would they still lift up from the front, even if my heels are on the little pad thing below the pedals? Kinda torn on buying this bundle because I don't want to have to mount anything
@@that_one_ritz_cracker I ended up doing some DIY and it worked out fine. I bought a sheet of 18mm thick MDF wood from a store, cut it down a bit so it wasn't as long, left a gap at the side furthest away from me, and then screwed the pedals into the board. As long as you screw the pedals into the board at the very bottom, and leave a good gap at the other end, and the wood is pushed against something like your wall or PC, they wont move at all when you push the brake down, even with the brake mod.
@@owlliesotsot8820 Do what I did. Buy a thin sheet of MDF, I got mine from B&Q, was like 15 quid. I cut it down to be a bit shorter, then screwed my pedals into the board, leaving a bit of a gap at the side of the board furthest away from you. Physics will do the rest. Even with the brake mod it wont lift, you just need to press the board against a wall or your PC to stop it sliding across the carpet.
Bonsoir,ai regardé la vidéo sur le pédalier Logitech avec axc true brake,est t'il possible d'utiliser ce pédalier avec une base Fanatec csl élite PS4 ?. merci.😻
Does your srp lite pedal stay connected in pit house? My pedals only show connected when I hit the gas or brake then immediately disconnects after I let go of gas or brake. Is that normal?
![MOZA RACING SR-P Accessory Kit [REVIEW] Load cell Spring/Damper Brake tuning kit!](http://i.ytimg.com/vi/ONR6QsFDDlE/mqdefault.jpg)
They were really hard at first, but after about 50 hours they get softer and feel way better
Swap out the springs with better ones, its definitely worth it in my opinion.
Where would I find a spring for the pedal? Located in the US
what kind of springs?
Good honest review.
Im a noob. I think its worth it. But will upgrade if i stick to the hobby 😊
Great video! That heavy spring feel probably loosens up after a couple hundred hours of racing I bet. There is typically some breaking in period required. In the past i have used a lot of RC car and truck springs and dampers to smooth out some of the progressiveness of these types of springs. They're cheap and effective and I have had pretty good luck with it
I just got mine. Got it for my r3 pedals. Cant really use it as its too stiff to be used on the floor. It needs to be bolted to a rig to get the best feel
I found it way too hard, so I sent got in contact with Moza to send out one of the softer springs. Hopefully I get one sent out
Did you get it?
that spring just broke on my pedals after 3 months of using it.. the pedals also constantly get de-calibrated.
what happens if you remove the original spring, and just leave the kit?
Nothing
Got it for €25 becuase the package was open in the shop. But will get a set of various springs.
Did you find any ?
My brake has a pretty big difference from the throttle though, thought I'd need the kit but honestly the brake feels good as it is
It’ll feel good but won’t be realistic
I’m going to buy a Moza R5 bus I play with a desk, I’m coming from the G29 and I wonder if I can still be competitive in braking without the spring? I also use an office chair…
@@Max10294 i'll tell you that the stock logitech pedals feels 100 times better than the stock r5 ones you just have no guide it's like driving a car with air in the system 😂
@@benjaminlavallee1787 I’m now thinking fanatec CSL DD, are the pedals any better?
@@Max10294 there the same tbh..
I want to buy "MOZA SR-P Pedals" and I have "Fanatec ClubSport Wheel Base V2.5". Can I use it together ? I will not lose anything in the games?
Are you on console? If you're on console then you can't mix, but if you're on PC then you can
@@dannyleeracing Thank you! I on PC. But I afraid some telemetry might get lost (because Fanatec Base sends some telemetry to ClubSport Pedals V3 for "ABS brake vibration" and "Throttle vibration" effects). But "MOZA SR-P Pedals" don't supports these effects, so, pehaps all good. Sorry, I'm just getting started.
Could this kit be compatible for the cammus c5 brake pedal?
Just noticed that it doesn’t hold in place since I don’t have a mount :/ still hyped though 🎉
Drilled mine straight into the carpet lol
What about removing the original spring that comes with the pedals? How would/does that affect the operation?
Didn't try that - bit more spannering involved to do that but it might make a difference to that heavy base spring load!
ohhh im interested do you guy tried already?
Does the perfomance kit work on the gas and clutch pedal of the r5 also?
No, you wouldn't want to use it on the throttle and clutch, it's for the brake only. For throttle and clutch mods I'd probably look at 3DRap's shop
My pedals would be going under my desk and pressed up against my PC on the carpet, and the PC is against a wall. Is that enough resistance to stop the pedals from moving? Or would they still lift up from the front, even if my heels are on the little pad thing below the pedals? Kinda torn on buying this bundle because I don't want to have to mount anything
did u find an answer anywhere else, or buy the set and try it perhaps? I've got the same question
@@that_one_ritz_cracker I ended up doing some DIY and it worked out fine. I bought a sheet of 18mm thick MDF wood from a store, cut it down a bit so it wasn't as long, left a gap at the side furthest away from me, and then screwed the pedals into the board. As long as you screw the pedals into the board at the very bottom, and leave a good gap at the other end, and the wood is pushed against something like your wall or PC, they wont move at all when you push the brake down, even with the brake mod.
Its gonna lift from the front,i just bought a r5..thats why im looking for solution beside buying a stand
@@owlliesotsot8820 Do what I did. Buy a thin sheet of MDF, I got mine from B&Q, was like 15 quid. I cut it down to be a bit shorter, then screwed my pedals into the board, leaving a bit of a gap at the side of the board furthest away from you. Physics will do the rest. Even with the brake mod it wont lift, you just need to press the board against a wall or your PC to stop it sliding across the carpet.
@@Exeee. is it heavy enough to hold the pedals so it will not lift up?
the brake kit should be included in the r5 bundle imo, its pretty much unplayable without
using this kit for the moza srp non lite throttle can make sense?
Bonsoir,ai regardé la vidéo sur le pédalier Logitech avec axc true brake,est t'il possible d'utiliser ce pédalier avec une base Fanatec csl élite PS4 ?. merci.😻
I dont know too much bout this at all but should I get one for my clutch and gas as well?
No, it'll only apply to the brake pedal - don't feel bad for asking, all this stuff is a minefield when you're just getting into it
We dont have much of a choice, i suppose. Unless we buy new oedals
Does your srp lite pedal stay connected in pit house? My pedals only show connected when I hit the gas or brake then immediately disconnects after I let go of gas or brake. Is that normal?
This sounds odd. Ive never had to do this
This is the big problem i find with Moza. They have great wheel bases and steering wheels and yet some of cheapest nastiest pedals.
RC car coil over springs ladies and gents. thank me later
☝️ this! I have been using these for a few years they're great. Especially combined with the wd-40 dry lube to keep them moving smoothly.
@@infn8loopmusic for sure. WD40 is freaking awesome for that too. Game recognize game lmao
Can you give us more details, what kind of rc car coil did you used?
is this a load cell
No, this is only an extra force for break pedal
i'm buying 3 to do all of them at 70$ each
Yeah. I don't think so. It's way too hard for the brake.
You're not using this for the gas pedal 😂
super nintendo pedals