This door install was super clean and seemed very easy to assemble and install. I like the centerline on the corrugations, looked really slick and slim.
Love the videos , the combinations of the self storage side door containers, a solar kit, and some windows, man doors and interior framing w\ closed insulation could make the space into anything...
What another great development in design and an equally thought out instructional video! I will definitely be getting this frame. The frame without the door is welcomed since I can get, or most anyone, can get a door locally that may suit the needs of the client. Easier on the client as well as you since returns from both ends are a pain on anyone's ends. Thanks ya'll!!
I ❤❤❤❤ your videos. Thorough and detailed. Are you are perfectionist? I wish I had my health because I would definitely DYI my forever home using your methods!!! Carry on and much success!!! From the Caribbean.
I’ve purchased and installed the 36” man door. The door installed as shown. One issue I had was after receiving the door , the door was dented and scratched. 3 of the 4 corners was damaged from shipping. The corners was not protected enough for shipping, to protect from damage. I was shipped a new door for replacement, this door was scratched or dented, but 3 of the corners was damaged as before because, in my opinion, the corners was not protected enough from damage from shipping. But as I said earlier it was easy to install.
The last thing we want to do is sell doors. We make zero money on them and get lots of returns. This corner dent issue may be resolved by the composite doors. We want to sell frames and have customers find doors locally but it's proven to be a difficult sell
@@TheContainerGuyTV You make zero money on your doors at $1400 a piece? Is that because you have the CEO make them and he gets paid $400 an hour? Pull the other one.
Love it, I would think you could buy the knockdown frame kit then buy the slab locally to save on shipping if you are only needing one or two doors. Just need to triple check the hinge locations and make sure the local door place puts the lock hole in the center.
Nice install. Do you worry about the door opening to the outside, and the possibility of someone knocking the hinge pins out ? What size rivets do you use ?
@@NotMe-st8qc you do realize hinges exist that don't look like the ones on your bedroom door, right? I promise those hinges would be harder to pop the pins out of than it would be to just drill the rivets out.
It is possible to buy a new container 40' HC reefer freezer with not not carrier TK compressor (only the insulted container), to make an apartment, container guy is it a good idea or do you not recommend it
Dude are these prices a joke? it is a single door for the cost of a double french door... you are ripping people off. Cost should be around 250-300. Thumbs down.
Get the containers while they’re cheap. This shipping container trend will continue to grow and the prices will go up like everything else. It’s cheap reliable housing.
A door that opens outward? The hinge pins are on the outside of the door. That means 5 year old with a screwdriver and a hammer can defeat your security….lol….door by just knocking the pins out and watching the door fall on the ground. Are you actually serious as to how stupid this is?
You guys have lost it. $1,400 for a door and a few steel channels. $140 would be reasonable but this is the age of the great rip-off. Don't tell me; Covid ate all the doors and they are worth their weight on gold now. I guess you're finding enough stupid people to rip off? Go for it, but I'm done with the Container-we'll-rip-you-off-royally-guy channel.
$1400.00 Wow you guys are REAL proud of your product dang!! That is half the price of the whole shipping container.
This door install was super clean and seemed very easy to assemble and install. I like the centerline on the corrugations, looked really slick and slim.
Love the videos , the combinations of the self storage side door containers, a solar kit, and some windows, man doors and interior framing w\ closed insulation could make the space into anything...
💯
A very helpful and thorough tutorial - thanks!
What another great development in design and an equally thought out instructional video! I will definitely be getting this frame. The frame without the door is welcomed since I can get, or most anyone, can get a door locally that may suit the needs of the client. Easier on the client as well as you since returns from both ends are a pain on anyone's ends. Thanks ya'll!!
You're going to spend $1400 for a door? Seriously?
I ❤❤❤❤ your videos. Thorough and detailed. Are you are perfectionist? I wish I had my health because I would definitely DYI my forever home using your methods!!! Carry on and much success!!! From the Caribbean.
Great content!!! Reinventing the game!!!
I’ve purchased and installed the 36” man door. The door installed as shown. One issue I had was after receiving the door , the door was dented and scratched. 3 of the 4 corners was damaged from shipping. The corners was not protected enough for shipping, to protect from damage. I was shipped a new door for replacement, this door was scratched or dented, but 3 of the corners was damaged as before because, in my opinion, the corners was not protected enough from damage from shipping. But as I said earlier it was easy to install.
The last thing we want to do is sell doors. We make zero money on them and get lots of returns. This corner dent issue may be resolved by the composite doors.
We want to sell frames and have customers find doors locally but it's proven to be a difficult sell
@@TheContainerGuyTV You make zero money on your doors at $1400 a piece? Is that because you have the CEO make them and he gets paid $400 an hour? Pull the other one.
is it the same for installing in reefer containers?
Great stuff
Love it, I would think you could buy the knockdown frame kit then buy the slab locally to save on shipping if you are only needing one or two doors. Just need to triple check the hinge locations and make sure the local door place puts the lock hole in the center.
11:33 the real boss walks in! 😹😹😹
Love what you’re doing. How would you meet newer building code requirements for zone 5 R values? What would the insulation schedule be?
Nice install. Do you worry about the door opening to the outside, and the possibility of someone knocking the hinge pins out ? What size rivets do you use ?
Product looks great. Just wondering though how the man door is secure if the hinges on the exterior. Pop the hinge pins and you're in...
Pins would be the harder option. Id just drill the rivets out.
@@CarlKarlstroma 5 year old with a screwdriver can pry out the pins….dont even need a drill
@@NotMe-st8qc you do realize hinges exist that don't look like the ones on your bedroom door, right? I promise those hinges would be harder to pop the pins out of than it would be to just drill the rivets out.
The window you use caulking, is there no caulking around this door frame?
I assume you have in swing doors as well?
Is shipping container good for storing clothing items?
No, they'll explode.
Available in Ontario???
We're in SK. We can ship
Is this 32" door available yet? We are in Louisiana
It is possible to buy a new container 40' HC reefer freezer with not not carrier TK compressor (only the insulted container), to make an apartment, container guy is it a good idea or do you not recommend it
I'm a fan of the cat have him in more videos lol
I don't even get distracted by it anymore 😂
Why is the door so much? Is it solid metal?
I was just wondering that. This thing is pricy! I can put in a standard fiberglass one for about $300.
Hi where can I order the door frame
containermodificationworld.com/products/galvanized-steel-man-door-framing-kit
I'm trying to buy your door and window kits
I'm looking to get 32" but I only see the 36" door on your website
How much is a 32" door kit with a Fiberglass door?
How much
great job - but - price is just to high
Darn, 32" wouldnt meet code in the US. Require 36" entry doorway if it has living quarters.
36" is our regular door. See here:
containermodificationworld.com/collections/man-doors/products/galvanized-steel-man-door-framing-kit
What does an average
20x8 cost??
40X8 Cost??
8x8 cost??
$900 - $12,000
Dude are these prices a joke? it is a single door for the cost of a double french door... you are ripping people off. Cost should be around 250-300. Thumbs down.
Should be about $800 with the custom frame. Dont worry they will come down by the end of 2024!
I think ill just use a regular steel door frame because 1350 for a single door is insane haha
Get the containers while they’re cheap. This shipping container trend will continue to grow and the prices will go up like everything else. It’s cheap reliable housing.
nice. but the price is higher than a giraffe"s a$$.
talk about screwing people out of money. I hope you guys wake up and help people instead of stealing their money
A door that opens outward? The hinge pins are on the outside of the door. That means 5 year old with a screwdriver and a hammer can defeat your security….lol….door by just knocking the pins out and watching the door fall on the ground. Are you actually serious as to how stupid this is?
That's not how 4.5" hinges work 😅
You guys have lost it. $1,400 for a door and a few steel channels. $140 would be reasonable but this is the age of the great rip-off. Don't tell me; Covid ate all the doors and they are worth their weight on gold now. I guess you're finding enough stupid people to rip off? Go for it, but I'm done with the Container-we'll-rip-you-off-royally-guy channel.