I have a question, when I assign the input signal to the channel, such as USB, will the recordings I can insert only be those recorded by the console or can I use other external media?
How are you guys made a quick error you cannot multitrack record to USB stick. You accidentally said that you can record multitrack SD card or to USB B to a computer. The USB stick is strictly stereo recording only.
CQ can send and receive multichannel audio with a built-in audio interface that connects to a computer or device via USB-B. The maximum number of channels that can be sent and received are: CQ-20B: 24×24 (48/96kHz) For capture and playback of an event, or for virtual soundcheck, signal is generally only sent or received at any time. In a studio environment however, sending and receiving signal at the same time is often required. This guide describes sending and receiving separately. For bidirectional use, simply ensure that audio is being sent from the DAW to the CQ using different channels than those being used to send audio from the CQ to the DAW.
@@SpringtreeMediaGroup I'm a little confused because on page 50 of the user guide, it says what you have quoted in the first paragraph, but on page 120 of the same document, under the heading 'Number of channels ', it says, 'CQ can record or playback up to 16 channels at 96kHz or up to 24 channels at 48kHz.' Or does whatever that's written on page 120 pertain only to SD card recordings?
Just because it has a FPGA chip doesn't mean it has the same processing as the Avantis and DLive. That is a flat out misrepresentation of the functionality of this desk.
Кино
Finally a mixer with channels and shit! About time..thank you!
I have a question, when I assign the input signal to the channel, such as USB, will the recordings I can insert only be those recorded by the console or can I use other external media?
Love the Cowboy Bebop shirt!!!
Awesome, Peter!!!
Thank you 🙂
How do you like it vs Mackie Dl Mixers
Hows the latency with phone based monitor??
I’d want the controls on my iMac, not just on Wi-Fi .like the Presonus for studio use
Man, if this was a 24ch it would be exactly right. 16 is good but its just not quite enough if you have to mic drums individually.
Can you use the Alt Output as a stereo IEM output? Can channels and levels be assigned to it, or does the Alt out mirror the main L/R? Thanks.
You can set the Alt outputs to mirror any of the other 8 outputs (6 aux + main), they can't output channels directly
@@Philip_J that is hugely disappointing.
DCAs?
Also i don't know if i like the form factor and all the exposed ports... i don't know if the fan and the sd ports will work with beers on stage....
You can always rack mount it and keep it off-stage.
Or not drink on stage lmao 🤣
What's the difference with a soundcraft ui24r?
ui24r has more inputs and outputs, slightly more expensive, a bit dated GUI, less choice for effects
Can you do presets no ir?
You do have standard scenes, like what you see on a lot of other consoles.
How are you guys made a quick error you cannot multitrack record to USB stick. You accidentally said that you can record multitrack SD card or to USB B to a computer. The USB stick is strictly stereo recording only.
Please what about the SD card, can I record multitrack ?
@@jeanmariefrancoix1376 Yes you can multitrack record to an SD card.
Need 32ch version of CQ series
aha! we meet again!
@@tylerrayhughes yes😆
If I use it as an audio interface to record into a DAW, can the CQ-20B record all 16 channels + the 2 pairs of stereo inputs at 96khz?
CQ can send and receive multichannel audio with a built-in audio interface that connects to a computer or device via USB-B. The maximum number of channels that can be sent and received are: CQ-20B: 24×24 (48/96kHz)
For capture and playback of an event, or for virtual soundcheck, signal is generally only sent or received at any time. In a studio environment however, sending and receiving signal at the same time is often required. This guide describes sending and receiving separately. For bidirectional use, simply ensure that audio is being sent from the DAW to the CQ using different channels than those being used to send audio from the CQ to the DAW.
@@SpringtreeMediaGroup I'm a little confused because on page 50 of the user guide, it says what you have quoted in the first paragraph, but on page 120 of the same document, under the heading 'Number of channels
', it says, 'CQ can record or playback up to 16 channels at 96kHz or up to 24 channels at 48kHz.' Or does whatever that's written on page 120 pertain only to SD card recordings?
@@cbmsnakes In regards to DAW, I would go off of page 50.
@@SpringtreeMediaGroup Thank you.
Just because it has a FPGA chip doesn't mean it has the same processing as the Avantis and DLive. That is a flat out misrepresentation of the functionality of this desk.
What interface would you recommend? I currently run the presonus 16r right now
Bluetooth also
I haven’t been able to figure out where the Bluetooth playback channel destination is…
save scenes???
Yup like a hundred scenes
What a waste of time. No more info in this video, than you can find in the brochure.