there is a can tune called 93 tune or daiblo tune. you can use to adjust fuel, timing and boost. or you can get a custom to from a CMR tuner... if you have bigger injectors than stock of bigger map and tip sensor then you need a rescale.
dont matter what you put as unit of messure. ha, it just display on the data viewer. if you display .5 and 4.5 then the dv will display, the upper and lower level want to know, when the wb out puts 5 volt what do you want me to display. well the install instructions tell you what 5 volts equal, is a afr of 19.99. just search for aem uego install instructions and read them good info found. i changes 19.99 to 19.33 and it made my gauge accurate to each other. prob bc a voltage drop.
Can you tell me where you percentage to enter as the unit of measure and 10.000-19.990? I know you said the book in the video but I dont have it anymore and I couldnt find that anywhere online. I called AEM Tech support and they said to enter Volts as the unit of measure and 05-4.5 for the upper and lower bound. Just want to make mine as accurate as possible. I have the same guage and it seemed off when datalogging on dataviewer then whats on the guage, this was using 19.990 and 19.330. Thanks
Update: you cannot use live AFR streaming while hookup up to a laptop on Dataviewer when using the Intune i2 or i3. Apparently it will only work if you do everything he said and log directly to the Intune, not while logging through laptop.
I wasted hours wondering why I was getting proper voltage on the aux cable, but AFR wouldn't move at all while live streaming on dataviewer. Save yourself the headache
so how does the intune work...do i have to buy the tuner and then download the tunes for my car or are those preloaded.....also can it only be used on one car?
there is a can tune called 93 tune or daiblo tune. you can use to adjust fuel, timing and boost. or you can get a custom to from a CMR tuner... if you have bigger injectors than stock of bigger map and tip sensor then you need a rescale.
Thanks for the Video, you have helped me a lot on the forums, I will try that tomorrow on my Trinity!
dont matter what you put as unit of messure. ha, it just display on the data viewer. if you display .5 and 4.5 then the dv will display, the upper and lower level want to know, when the wb out puts 5 volt what do you want me to display. well the install instructions tell you what 5 volts equal, is a afr of 19.99. just search for aem uego install instructions and read them good info found. i changes 19.99 to 19.33 and it made my gauge accurate to each other. prob bc a voltage drop.
the dialbo cord has 2 channels the intune and take 2 analog inputs, the digi key cable i used only had 1 channel.
Can you tell me where you percentage to enter as the unit of measure and 10.000-19.990? I know you said the book in the video but I dont have it anymore and I couldnt find that anywhere online. I called AEM Tech support and they said to enter Volts as the unit of measure and 05-4.5 for the upper and lower bound. Just want to make mine as accurate as possible. I have the same guage and it seemed off when datalogging on dataviewer then whats on the guage, this was using 19.990 and 19.330. Thanks
Update: you cannot use live AFR streaming while hookup up to a laptop on Dataviewer when using the Intune i2 or i3. Apparently it will only work if you do everything he said and log directly to the Intune, not while logging through laptop.
I wasted hours wondering why I was getting proper voltage on the aux cable, but AFR wouldn't move at all while live streaming on dataviewer. Save yourself the headache
Literally having this problem rn lol
do you need a wideband or do you just run the cord
so how does the intune work...do i have to buy the tuner and then download the tunes for my car or are those preloaded.....also can it only be used on one car?
I have a camaro SS 2002 how can I get the right afr thanks
Is there any other unit of measure that can be used besides "percent"? The guy doing my tuning said it needs to be in a wideband number. Thank you!
SRT- Mustang Killer afr is a percent
What do u mean by channel 1 or 2 cord?