for comparison (only other passenger trains I had on deck): -SMART Nippon Sharyo DMU 103, 104 buses: -NJT Flxible Metro B 3529 -NJT Flxible Metro D 3710 -NJT Flxible Metro D 3729
@@lolfunnycp prolly is dual motored then. i'm looking at repowering my NewRay RailroadN trains with dummy wheelsets to collect power for the existing motor
I HOPE YALL WILL FIND THIS HELPFUL MAH BOYS: 1. To get these, you must either pre-order or buy from Ebay right after they're released! Those are the two ways I got mine! Yo, check out NScaleSupply, they stay taking pre-orders as of december 2020 www.nscalesupply.com/atl/atl-passenger-commuter.html Pre-order now or you may have to wait until the next production cycle lol! 2. If yall want to obtain these outside of the Atlas pre-order cycle, your best bet is Ebay! They will be rare as f#%k... welp, good luck! 3. I apologize but mine ain't for sale! It took yo boy too much time and effort to build my whole set... I got like 20 cars and 6tfh locomotives, some were a b#tch to find since I preordered from a sketchy site and they didn't deliver everything
If I remember correctly, it was due to the trailers having truck-mount couplers. On curves, they didn't work well with the locomotives and cab car ends, which had body-mount couplers.
Cool video! Yeah they're real nice! I hear you about the truck mounts, my coach kept derailing at even a slow speed on a curve like that. It's good to see that it can be done ha! Atlas did such a good job w the deets, the truck problem is a shame! Kato stuff never had problems. The set is boss though! Wanna snag the ATM set too, even though the company is in transition. Cool video man!
Thanks mah boy! I'm glad it's not just me, but welp... I'm hoping Atlas will release an official fix soon, or we'd have to convert them to body mounts if we wanna roll them in legit configurations 😕 Yeah I feel you, my Kato commuter set has the same coupler configuration but has no problems, so I think Atlas just messed up! Yeah, this set is still BEOSS lol! And same; AMT's blue paint scheme is tha bomb O_O
Go to extend the set longer because most of the trains that operate around Hillside where Atlas models is from actually run to or from New York Penn Station to High Bridge and Annandale Exit 18 I-78
I’m definitely getting this locomotive. I am worried however about the issues regarding the bi-levels. Luckily, Rapido is making some Comet III cars so I will likely get 3 of those instead
Yo what's good! I've been busy as f#%k with school, so I ain't had much time to fan! I still have some uploads planned... i'll prolly do the damn thing over thanksgiving or winter break! Ohhhh sh#t, could you send me the link lol
NScaleTransitModels(lolfunnycp) here’s the title: 1993 GMC/White W/ 20 YD. Heil ASL - Test Drive. And what uploads do you have planned? Also have you gotten any more throaty exhausts recently?
@@GarbageSean I see you now! That 1993 gmc/white is throaty AS ALL F#%K!!! 😂😂👻👻 L10 killin' it again!! And do AHH have throaty uploads planned? Oh hellll yes!
I designed them, 3D printed off Shapeways, and painted them! The buses in the video are part of my collection, but I also build to sell if you're interested
What trucks would you reccomend using for those to avoid derailments?
trains featured:
-(4 sets) Atlas "N MODERN COMMUTER TRAIN SET":
-NJ Transit Bombardier ALP-45DP locomotive
-Bombardier Multilevel cab car 7047
-coach 7553
for comparison (only other passenger trains I had on deck):
-SMART Nippon Sharyo DMU 103, 104
buses:
-NJT Flxible Metro B 3529
-NJT Flxible Metro D 3710
-NJT Flxible Metro D 3729
NScaleTransitModels(lolfunnycp) Where’d u get the DMUs, they’re dope
@@CentralJerseyRailfan thanks man, they are! The DMUs are custom; I 3D printed kits off Shapeways and built them fron those!
NScaleTransitModels(lolfunnycp) epic, probably uses a Kato chassis
@@CentralJerseyRailfan pretty much, it uses the tomytec HM-01
@@lolfunnycp prolly is dual motored then. i'm looking at repowering my NewRay RailroadN trains with dummy wheelsets to collect power for the existing motor
Whats the DMU. at 10:30?
SMART train, custom made
AWESOME!!!💢💢💢💢💢💢💢💢💢💢💢💢
I HOPE YALL WILL FIND THIS HELPFUL MAH BOYS:
1. To get these, you must either pre-order or buy from Ebay right after they're released! Those are the two ways I got mine! Yo, check out NScaleSupply, they stay taking pre-orders as of december 2020 www.nscalesupply.com/atl/atl-passenger-commuter.html Pre-order now or you may have to wait until the next production cycle lol!
2. If yall want to obtain these outside of the Atlas pre-order cycle, your best bet is Ebay! They will be rare as f#%k... welp, good luck!
3. I apologize but mine ain't for sale! It took yo boy too much time and effort to build my whole set... I got like 20 cars and 6tfh locomotives, some were a b#tch to find since I preordered from a sketchy site and they didn't deliver everything
What’s the main cause of the derailing of the bi levels?
If I remember correctly, it was due to the trailers having truck-mount couplers. On curves, they didn't work well with the locomotives and cab car ends, which had body-mount couplers.
I need a cab car
me too, i'm considering getting some in HO
9:11 Amtrak Long Distance Trains. Lol
It kinda does look like one XD
XD
Where did you get the smart train? It runs locally around me but I can’t find any models
I custom build it... there's a shapeways kit available plus I wrote a guide on how to build
Howmuch price ?where did you buy this train model .
Check the pinned comment
Oh I want IT I want I want it I Want IT I Want It Like so badly
Cool video! Yeah they're real nice! I hear you about the truck mounts, my coach kept derailing at even a slow speed on a curve like that. It's good to see that it can be done ha! Atlas did such a good job w the deets, the truck problem is a shame! Kato stuff never had problems. The set is boss though! Wanna snag the ATM set too, even though the company is in transition. Cool video man!
Thanks mah boy! I'm glad it's not just me, but welp... I'm hoping Atlas will release an official fix soon, or we'd have to convert them to body mounts if we wanna roll them in legit configurations 😕 Yeah I feel you, my Kato commuter set has the same coupler configuration but has no problems, so I think Atlas just messed up! Yeah, this set is still BEOSS lol! And same; AMT's blue paint scheme is tha bomb O_O
Hey 👋 I’m going to make a few things that you really need to do for you to bring the new George transit
Am gonna ride tis damn f-ing train
Go to extend the set longer because most of the trains that operate around Hillside where Atlas models is from actually run to or from New York Penn Station to High Bridge and Annandale Exit 18 I-78
I been extend my sh#ts lol (pause)! I got 24 cars in total now 😂
@@lolfunnycp thanks & the actual train is 8-10 cars long the same thing for a Bay Head to New York Penn mode switch Long Branch.
I’m definitely getting this locomotive. I am worried however about the issues regarding the bi-levels. Luckily, Rapido is making some Comet III cars so I will likely get 3 of those instead
Good move man! Yo I might have to get some of those Comet III cars too, when they drop lol
I wish you luck to having a huge n scale sound layout with all the trains you wish for.
Nice choice using flxible buses
OMG! This is so cool! I want one! Where can I find this?
Looking great, I've subbed
Awesome video mate and I love bombardier are better than a ugly hyundai rotem
NScaleTransitModels(lolfunnycp) me too I don't like Hyundai Rotem Tri rail and metrolink but not mbta. Mbta is the best built passenger
NScaleTransitModels(lolfunnycp) me too anyways do you want come to my channel
@@FamilyGuyandWonderGarbo8448 Yo I saw the Enviro 200 video you posted; that sh#t sounded GOODRRRR! O__O
NScaleTransitModels(lolfunnycp) yeah did you write a comment
@@FamilyGuyandWonderGarbo8448 just now yeah
nice train's and buses
What kind of tracks are those?? I'm trying to find the right tracks for my set and those tracks looks like the right ones
It is the Kato Unitrack system, in particular the M2 set that I use as my test track
Multi level, Bi level is basically the same
I skipped to the train part UGH MANUALS SHMANUALS
Mah boy, where have you been the past month? I haven’t see anything new from you! Also have you checked out that 93 GMC/White Expeditor?
Yo what's good! I've been busy as f#%k with school, so I ain't had much time to fan! I still have some uploads planned... i'll prolly do the damn thing over thanksgiving or winter break! Ohhhh sh#t, could you send me the link lol
NScaleTransitModels(lolfunnycp) here’s the title: 1993 GMC/White W/ 20 YD. Heil ASL - Test Drive. And what uploads do you have planned? Also have you gotten any more throaty exhausts recently?
@@GarbageSean I see you now! That 1993 gmc/white is throaty AS ALL F#%K!!! 😂😂👻👻 L10 killin' it again!! And do AHH have throaty uploads planned? Oh hellll yes!
I think ima order an 8 or 9 car set
You selling?
Check the pinned comment
Cool video I subscribed now.
How you get the buses?
I designed them, 3D printed off Shapeways, and painted them! The buses in the video are part of my collection, but I also build to sell if you're interested
NScaleTransitModels(lolfunnycp) I will let you know by tomorrow
@@ricardoserrano4533 cool
Email me how much in both scales n and ho
NScaleTransitModels(lolfunnycp) hey I’m definitely interested in those model buses...how can I purchase them from you ???
What's good man
Does it run on DC?
Yep! But it is DCC-ready and Atlas also sells locos with DCC preinstalled!
TOO LONG!!!