Torqstorm troubleshooting(LOW BOOST) on a 5th gen Camaro. We found the fix and make great numbers.

Поделиться
HTML-код
  • Опубликовано: 22 окт 2024

Комментарии • 51

  • @jbeezy13131
    @jbeezy13131 2 года назад +8

    Thank you again! Couldn’t be more happier with the car. These are great guys and great to work with!

    • @nufnuffz28
      @nufnuffz28  2 года назад

      Thank you sir!

    • @p_934
      @p_934 Год назад

      Hows the kit been working for you thus far?

  • @neitzelm1
    @neitzelm1 2 года назад +5

    I'm currently installing my torqstorm kit on a 2010 camaro ss with pretty much identical setup as your customer. I have a mishimoto intercooler installed. Have you guys had good luck with those intercoolers?

    • @nufnuffz28
      @nufnuffz28  2 года назад

      They seem to be pretty good. Your boost will tell the story!

  • @SuperDSFADSF
    @SuperDSFADSF 2 года назад +2

    I’m mid install on my 5th gen. A6 fbo and big pd cam. Just finished putting on the ati dampener and pinning the crank

    • @nufnuffz28
      @nufnuffz28  2 года назад

      PD cam on a centrifugal, hmmm
      What intercooler?

    • @SuperDSFADSF
      @SuperDSFADSF 2 года назад +1

      @@nufnuffz28 mr bling intercooler aka treadstone

    • @nufnuffz28
      @nufnuffz28  2 года назад +1

      @@SuperDSFADSF if it doesn't say treadstone keep an eye on it. Seen Mr Bling ones cause huge boost loss.

    • @SuperDSFADSF
      @SuperDSFADSF 2 года назад

      @@nufnuffz28 in case I have any questions

    • @jeffneibarger6274
      @jeffneibarger6274 2 года назад +1

      @@nufnuffz28 all mr bling kits include treadstone intercoolers now

  • @baby-sharkgto4902
    @baby-sharkgto4902 Год назад +1

    Nice work guys

  • @probation2propagation420
    @probation2propagation420 10 месяцев назад +3

    Whats the part number for this intercooler?

  • @GoYoteSlaya
    @GoYoteSlaya 2 года назад +2

    Anyone with a torqstorm, I highly recommend you don’t void the warranty. I have already had three malfunctions with my blower. Bearing failure 3 times on a 3.1 pulley only revving up to 6400 and leakage. The problem with these blowers is there is no vent relief valve for when it gets hot so it ends up leaking oil Thru the seal and eventually bearing failure.

    • @nufnuffz28
      @nufnuffz28  2 года назад +2

      As they start to age they are surely looking to not be aging too well. This one was voided when he dropped it off!

    • @GoYoteSlaya
      @GoYoteSlaya 2 года назад +1

      @@nufnuffz28 I’ve only put about 9k miles on mine so far and it’s about a year old. A lot of others have been having the same issues too.

    • @nufnuffz28
      @nufnuffz28  2 года назад

      @@GoYoteSlaya that stinks. Are they taking care of the issues so far?

    • @GoYoteSlaya
      @GoYoteSlaya 2 года назад +2

      @@nufnuffz28 yes they have fixed it each time no issues, they have good customer service. I just cant do this for the rest of time taking my supercharger off every 3 months to send to them and wait for 2 weeks to get it back.

    • @baby-sharkgto4902
      @baby-sharkgto4902 Год назад

      Are they less expensive than Procharger, is that why people go to Torque Storm? I have been seeing a lot of people purchasing Torque Storm and I’m wondering why they would not have just went Procharger? Me personally nothing against Torque Storm, I am just curious.

  • @DHilliard48
    @DHilliard48 2 года назад +1

    Good stuff! Nice work!

  • @nikob235
    @nikob235 2 года назад +1

    What cam is in it and very impressive just with intercooler swap

  • @the_bald_eagle_machine6559
    @the_bald_eagle_machine6559 Год назад

    stock fuel system? Injectors? I'm getting ready to add a Torqstorm to my 2011 LS3 M6 Camaro and I am going with zl1 fuel pump and 850cc injectors.

    • @nufnuffz28
      @nufnuffz28  Год назад

      Stock pump and 85 lb injectors. 93 will be fine this way. E85 will need the zl1 pump to get some more headroom

  • @trhall75
    @trhall75 2 года назад

    I didn’t hear you guys say what belt you switch to in the video . What belt did you guys use ?

    • @nufnuffz28
      @nufnuffz28  2 года назад

      Sorry. We put it in another video. Went down an inch

  • @domosmash
    @domosmash Год назад +1

    🤘🏽🤘🏽🤘🏽

  • @mikehogan5087
    @mikehogan5087 4 месяца назад +1

    Heat soak issues?

    • @nufnuffz28
      @nufnuffz28  4 месяца назад

      Not too bad with the better IC!

  • @issacvillafan5299
    @issacvillafan5299 5 месяцев назад +1

    I have a 2010 with a torqstorm currently having white smoke problems don’t know why does anyone have a clue?I have a video of the car and what’s it doing aswell..need some help!!!

    • @nufnuffz28
      @nufnuffz28  5 месяцев назад

      May be a catch can issue or motor is hurt. Hard to tell from here.

  • @credelljackson2317
    @credelljackson2317 Год назад +1

    The clamp on my blower housing bad it leaked from the blower

    • @nufnuffz28
      @nufnuffz28  Год назад

      I've heard that from a few people. Good find

  • @waggss24
    @waggss24 2 года назад

    Hey guys ive got a 68 c10 with a b15 lsx 376 in it twin torque storms , the issue im having is i make very little boost like 6 pounds until 5000 rpm then like a switch at 5000rpm it makes 18psi instantly, Just curious if you have any ideas on why this might be happening

    • @nufnuffz28
      @nufnuffz28  2 года назад

      Sounds like the BOV is staying open some until that point to me

  • @GOD2FAST
    @GOD2FAST 2 года назад +2

    Could have made that power with a cam & LSA blower with no issue 🤦🏾‍♂️

    • @nufnuffz28
      @nufnuffz28  2 года назад

      Or a procharger, or a BIG all motor build, or a turbo. You can make power 100 ways, so no reason to worry about what way he did it. No issues now amd pulls great!

    • @baby-sharkgto4902
      @baby-sharkgto4902 Год назад

      @@nufnuffz28well said. *Exactly*

  • @jplperformance9073
    @jplperformance9073 Год назад +1

    Wow, the old intercooler was junk

  • @cantcme1243
    @cantcme1243 2 года назад +1

    I wuz really close to getting a Torquestorm and my mechanic stopped me immediately and said they're not reliable and are garbage!

    • @nufnuffz28
      @nufnuffz28  2 года назад +1

      We have seen decent results for the price, but overapl reliability seems low :(