How to replace your rear bumper fog lights on a Jeep Cherokee with running brake signal LED. Get them on www.taillightsolutions.com/ Subscribe for more
If you order a kit and get no instructions, this is what worked for my 2015 Latitude 4x4 with towing: I found connecting to the wires that go directly into the tail light was easiest. Red to Purple(running lights), Blue to Green( Brake & Turn), and black to black. Hope this helps!
How did you remove the old bulb less ones and put the new ones in, you didn't show that, did you need to remove the bumper or just go through the fender well?
Michael Kope the bumper light come with the bulb already. You pull the lights out and run the cables thru the holes. They have one clip in the corner, you pull it out with a flat screwdriver, is not that hard.
@@myname2263 try those ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Brilliant Red, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Brake Lights, Tail Lights, Turn Signal Blinkers They work just fine
Oscar Maldonado There's a link below the description. I found it there, if you do not see it on the website, send them a message and they will reply to you. I guess they haven't post them yet.
@@deegetty615 I'm not sure what socket they came with because the ones I got came with the bulbs. Check the socket size and look online to see what it is. Or ask whoever gave them to you
Contact us via email at taillightsolutions@gmail.com for ordering and pricing info. These kits are not yet currently offered for open sale on our website but they can be purchased if you contact us directly. They are made by hand in the USA and include full warranties.
How and where can I access and remove these two screws? Should I remove the bumper? The rear right fog light glass of my vehicle is broken and I want to replace it. Can you describe it briefly?
I CAN'T STAND THIS LIGHTING SETUP. Seriously, why the same lights for both the turn signals and brake lights? Is it really that for Jeep to include an amber turn signal?
I'm not blaming you. I'm just ranting on the taillight setup Jeep decided to use that is a safety compromise, and this video explains why ruclips.net/video/O1lZ9n2bxWA/видео.html. It's honestly something that's pissed me off since i was little.
If you order a kit and get no instructions, this is what worked for my 2015 Latitude 4x4 with towing:
I found connecting to the wires that go directly into the tail light was easiest. Red to Purple(running lights),
Blue to Green( Brake & Turn), and black to black. Hope this helps!
I got mine today from ebay , no install guide or anything . Can you tell me what colors were used on the passenger side ?
What you did on the right side mine got different colours compare to left lights wiring. Right lights wiring colour i got black/red/dark grey or grey
I thought they all had the same colors, just get a tester and try each color until you get the right one
@@eddylopez3005 mines different i dont why 2018 cherokee north
@@charlesreyes9948 maybe ot was different, mine was a 2015
I was going to ask about the signal but I seen the video of much further
I've been looking to get in a pair they look sweet at night
They look awesome at night. Check the website in the description to see if they still have it
How did you remove the old bulb less ones and put the new ones in, you didn't show that, did you need to remove the bumper or just go through the fender well?
Michael Kope the bumper light come with the bulb already. You pull the lights out and run the cables thru the holes. They have one clip in the corner, you pull it out with a flat screwdriver, is not that hard.
@@eddylopez3005donde compraste el kit??
@@javieralvarezalfonso3657 esta en la descripción del video
Ok, I didn’t realize that they just pop out, thought they were screwed in from inside of the bumper. Thanks
I'm from Mexico, how can I get the kit?
I dont know if they ship that far but Website should be in the description. Thank you!
Is there a way to install this and only have those bottom lights come on when you turn on your front fog lamps?
Yes but you will have to install a whole different pair of harness connectors to do that
@@eddylopez3005 I will give it a shot. I am moving to England and rear fog lamps are mandatory.
Thanks
How did you remove the taillight and the one below it ?
Duncan Lockhart for the taillights just remove two screws, top and bottom. The rear fog lights just pull them out with something flat. That's it
Eddy Lopez thanks !
Any change you can tell me what light socket and LED you used ?
I think it was a 2825 socket but with 3 wires. running, signal and ground
@@eddylopez3005 Cool man , I've been all over town . Any special LED ?
@@eddylopez3005 Looks like the correct socket but 2 wire.
@@myname2263 try those ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Brilliant Red, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Brake Lights, Tail Lights, Turn Signal Blinkers
They work just fine
@@myname2263 you can try that too and see if it works
Where did you find the kit?
Oscar Maldonado There's a link below the description. I found it there, if you do not see it on the website, send them a message and they will reply to you. I guess they haven't post them yet.
If I get what I need, can I come to you so you can install and how much?
I do not have a place to work on that right now. Watch the video is really easy
Need to know which light bulbs for replacement
Do you want to know the bulb size?
@@eddylopez3005 yes, please. These lights were given to me. But, there were no bulbs with them.
@@deegetty615 I'm not sure what socket they came with because the ones I got came with the bulbs. Check the socket size and look online to see what it is. Or ask whoever gave them to you
Will see what I can find. Thank you.
Is this from amazon?
No, you get them in this site www.taillightsolutions.com/
What's the name of the company for the lights & wiring please
Website where you can get them is this
www.taillightsolutions.com/
Where can I get them for a 2019??
Check the link on the Video or go to Amazon
Yeah not finding them on the link you provided
Sleepynaut that's where I got them from
Eddy Lopez i went on that sight,only showed grand jeep. Strange ill keep looking. Nice tutorial, gj!
Do these fit on a 2019?
No, the 2019 lights are ismaller than that one.
Contact us via email at taillightsolutions@gmail.com for ordering and pricing info. These kits are not yet currently offered for open sale on our website but they can be purchased if you contact us directly. They are made by hand in the USA and include full warranties.
These work as brake lights as well??
Yes they do work as brake lights as well
@@eddylopez3005 awesome, can’t wait to install mine, and appreciate you brother,
@@stevenrobinson2862 Glad you liked it man, they really look nice and bright at night. Enjoy them
how much was that/
Go to the website they should the prices there.
I wanted to see how the rear fog lamps are removed, but there were none.😩
They have 2 screws in the corner, not so hard to remove
How and where can I access and remove these two screws? Should I remove the bumper?
The rear right fog light glass of my vehicle is broken and I want to replace it. Can you describe it briefly?
wait those are lights?
Yes those are lights and they looked really bright
I CAN'T STAND THIS LIGHTING SETUP. Seriously, why the same lights for both the turn signals and brake lights? Is it really that for Jeep to include an amber turn signal?
It looks good having both rear bumper lights, and you have more back light.. what I think
I'm not blaming you. I'm just ranting on the taillight setup Jeep decided to use that is a safety compromise, and this video explains why ruclips.net/video/O1lZ9n2bxWA/видео.html. It's honestly something that's pissed me off since i was little.
I get a set from Ebay
kin ng do you like those from Ebay? They do look good, don't they?
I really do,and thank you for showing us that there is a choice then the factory reflector.
How much did you pay ?
Thanks