EDGUN LESHIY 2 BEHEMOTH MODERATOR TEST
HTML-код
- Опубликовано: 16 окт 2024
- On request of many followers i am showing the benefit of the Behemoth moderator over the stoch L2 one .
EDGUN LESHIY SHOP :
www.edgunleshi...
www.edgunleshi...
speed-loader
www.edgunleshi...
Music credits :
Crate Digging - Tigerblood Jewel
I'm just seeing this! Ed Gun was ahead of the game as other makers are now implementing modular, and QD- Quick Disconnect .
Thanks for video! I have personally heard the difference with others and they sure don't lower the Decibels as much as Behemoth!
True , the behemoth is a very good mod 👌
5 decibels above ambient sound is ridiculously quiet for a 30 caliber. Edgun doesn’t do anything half assed. Great product. The leshiy 2 is on my Christmas wish list this year.
That is one hell of a X mas present 🎁👍
Hope you got it. It’s an amazing gun and easy to work on if you understand how it’s put together
Is this really this quiet? I mean the impact m3s with Donnie FL's are pushing almost 90 decibels but this thing is barely over 60?
@@jdr03272
That’s what he said, although I wouldn’t know myself cuz Santa didn’t bring me one.
The Air Gun Lashi is absolutely my favorite PCP rifle I have ever had the pleasure of shooting and owning.
It’s a fun little tool indeed 👊
Hi, very informative as always. Thank you for the good work. I also have had access to all the possibilities with the Behemoth moderators and in my case I think that the direct connection without the reflex adapter works much better specially for the shorter barrels (250 mm and 350mm) the pitch is also a little bit more muted. The sound moderation might not be significant compared to the one with the reflex adapter but the pitch is clearly different. Again, this is just my personal experience. Thanks again for your efforts showing us all the facts and all the “toys” from the Edgun brand. Definitely one of my favorites. 😉
Thank you for the support mate , I will definitely try the setup without the reflex part as I assumed it wouldn’t be less effective 🫣
Can you demo your setup
@@johnhartley4200 what do you mean ?
Lovely item*, Edgun do bring a lot to the airgun table.
Thanks for showing.
* If a little out of my range money wise.
Thx for the support and comment 🙏
I have behemoth with a 7 stack moderator lovely whisper quiet fantastic technology
7 stacks 🤩 definitely backyard friendly 👍
I have a 30cal leshiy 2 and it is pretty quiet with a stock moderator. Make sure they did not send you a 30cal sound moderator for your 25cal barrel like they did it to me. It was a bit loud until I changed the barrel.
To check that you have to disassemble the moderator and find caliber markings on plastic db killer.
I have a relatively small backyard and when a slug hits something it is far more louder than the shot itself. I don't think you actually need a behemoth unless you desperately want to do that movement from every hitman movie when screwing on a silencer. Cheap solution is 3d print more effective db killer.
No I have checked and my original mod is made for 30cal , the original sound isn’t that much compared to other rifles with the same barrel length. As you could see it was difficult to show what the behemoth could do 😉 in outdoor conditions. What is your db reading with the original mod and what regulator pressure and velocity are you shooting those slugs ?
@@Airbuks I have 160 bar setup and around 230ms. Slugs are custom made 3.22-3.23g. I don't have proper equipment to measure the sound level, but it definitely became a way softer
@@interstellarv0id interesting 🧐
This behemoth mod only comes in 2 options 177/22 and 25/30.
Epic video as always!
Is there a chance you might do a comparison of the Leshiy 2 behemoth, Shorok, and Donny FL moderators in the future?
They all look so good!
Thx for the support 👍 but I am afraid I won’t be doing that video for different reasons
@@Airbuks 👍
Good day! You seem to know the gun and its inner workings quite well, so perhaps you could answer a burning question of mine. Opening up bleed screw on my buttstock does not degas the gun properly. I have the 350cc bottle installed, not the default cylinder. It seems the air is stuck before the regulator and unable to pass through the plenum. The cyclinder has a secondary bleedscrew, however the bottle does not. Do you know of a safe and alternative way to bleed the remaining air out? Ive heard that its possible to bleed air from the gauge section, but until I know for sure.. I don't dare to try it out. There is about 90 bar remaining in the tank and I don't want parts getting launched at me at high pressure, haha. Until I find a way to fully degas it, I won't be able to open it up and take a look inside...
Hi , that sounds like a valve lock issue 😬 I presume you have bleed the bleed screw on the front plug near the connector to the main body , correct?
Do you have a newer model with a bleed screw at the back of the gauge adapter?
I would strongly advise not to push the gauge out as this is super dangerous with 90bar remaining in it !!! You could lose finger etc
@Airbuks Hey, wow thanks for the quick response! I was thinking the same. It seems like a valve lock on the regulator. Opening up the primary bleed screw (the one on connector as you mentioned) doesn't do much. And as you probably guessed, the gun doesn't shoot when pulling the trigger, nor does it do anything when I press the valve pin with a tool. So the air never actually reaches beyond the regulator.
I don't see a screw on the back of the gauge adapter unfortunately. Thanks for the warning! I had a feeling that it wouldn't be a great idea too tinker with it at 90 bar. I just wish there was a secondary bleedscrew BEFORE the plenum.. that would've solved the issue easily.
I have a second buttstock fortunately, so I am able to shoot with that one. But I wanted to take the guage off the broken stock and use it as a regulator gauge. But it doesn't look like thats happening anytime soon. It'll be many, many weeks before all the air has seeped out on its own.
@@Airbuks Btw, greetings from the Netherlands neighbor, and great job on the content!
@@MonsterMaze do you have the reaper regulator ( external adjustable one ) ? Then you can try raising the regulator pressure maybe something is not opening like it should .
The newer gauge adapters have a bleed screw these days to fix this issue
@@MonsterMaze nice 👍, gewoon Nederlands kan ook dus 🤣
Thanks, I,ve been waiting for this vide long time. Many thanks as usual for sharing the information. Keep on working like that.
Thx for the support 🙏
Very nice video. I was hoping that someone would do this comparison. But to make the comparison complete, what is the db of the straight barrel without any moderators at all? New subscriber here, thanks
That’s a comparison my neighbors won’t like 🤣 extremely loud !!
Very informative video, thank you. I saw you had a DonnyFL Emperor mounted on another video. Do you think the Behemoth or the Emperor is quieter?
The Donny kit with emperor is more quiet but this looks better and the moderator is easier to remove
Awesome video man and that is a badass air gun I really want one but with all the brands out there it's hard to choose 😕 there are so many good looking air guns that I want but can only buy one lol thanks for sharing bsafe buddy 👍
Thx for the support mate , indeed many nice guns out there but you can only shoot one at a time anyway 😉
@@Airbuks yup you are right
In your opinion does the Behemmoth definitely make it quitiar in a noticeable way. Is it worth spending that money or not really.
like the new shooting area!!
Thx , just have to find a more beautiful angle to film 😉
So your leshy 2 30cal with 3 section moderator makes 56 decibels right. My question is if it was in 22cal will there be big difference?
At a certain point you can’t get any lower no matter if you go down in caliber. This one operates close to the ambiant surrounding noise so I can measure something like that unless I can remove the surrounding noise 😉
So if I had both a 22 barrel and a 30 barrel but didn't want to buy 2 behometh Qd shroud/moderator kits (177/22 & 25/30) for each occasion, what would be the outcome of just getting the 25/30 variant to use for both 22 and 30 cal? I assume it would still work but maybe get louder results with the 22 barrel attached than I would have done with the smaller behometh variant?
Your way of thinking is correct 👍
What is the maximum weight round that magazine or rifle can handle? And do heavier weight rounds, sound louder?
Thanks for a great video. You've made up my mind I'm going to buy the behemoth. Do I need to buy the rear reflex chamber with the picatinny tri lug ??👍👍
Hi , if you are going to use it only for the Leshiy I would advise to buy the one with the reflex chamber if you would like to use the behemoth on other airguns I would buy the one without the reflex chamber and buy the correct adapter for the airgun you are planning to use it on aswel
Yes it's for the leshiy 2 thank you 👍👍
Which one is a better modular system in your opinion? Leishy 2 or Fx Impact M3?
They are not comparable in my opinion. You can’t put both up against each other. Semi vs single action , magazine feed into the barrel vs fired out of the magazine, tuning options etc ….
Great video, I’m teetering on the edge to sell my taipan veteran and make the switch.
Hi , thx .
I can’t advise on selling or not as I don’t have any experience with the Taipan.
The Leshiy is a awesome platform and is very customizable that’s what I love about is
Hello.
what is that for a tripod?#
my behemoth is scheduled for delivery on december 7th.
have ordered an additional chamber.
but it doesn't get much quieter than 54 db.
there is so much noise coming from the connection at the magazine.
through the system
thanks
Hi that tripod is from a company called Sirui.
If you have a quiet calm day you can get it to 51db but at the day of filming it wasn’t possible.
Yes as a shooter the shot cycle is more noise then the report itself as you could here in the video
@@Airbuks
yooo.
that's right.
video very nice keep it up
Hello, great video I was really into exploring the benefits of behemoth moderator. Have valkyre shorok and would switch to behemoth picatinny version and do you know is it louder than yours (as it doesn't have back side as this one) and how many stacks do you use? thank you
Hi , I don’t have any experience with the shorok . So I can’t advise on that .
I am using the behemoth with a 5 stack .
Endcap , 3 middle parts en a front cap
Any more didn’t make a difference in my setup
@@Airbuks ty
$500 for a moderator is absolutely absurd.
This is why I haven't purchased a single accessory for my Leshiy 2. Even my carbon fiber tank is made by someone else. I've 3D printed nearly everything else with carbon fiber filament, including those little red pucks that break if you fire it without a magazine.
I've made handguards, muzzleloaders, speed loaders, I made an adapter so I can use my donnyfl's that are made for my other air rifles. Amount of money I've saved and no one can tell the difference when I show my rifle. I paint the parts I make. I think I'll take a crack at making one of these. I need to take it to the next level though and purchase a milling machine and metal lathe. The only two tools my shop lacks.
I think what they charge for the accessories is egregious.
They are indeed known to be very expensive, I don’t know if it has to do with export /import costs etc or just what they ask 🫣
3D printers are great and I also make a lot of stuff myself but it’s not for everyone offcours
Do you have a Instagram or something so I can see your creations?
@@Airbuks Sorry bro, I didn't see your comment. I'm just now getting an Instagram and Etsy and all that stuff together. I'll post up a link here when I do.
Hi. Sounds very interesting. Where can i see or buy your creations ?
I also have a 3d printer but dont know if the spead loader print files are good.
Can you do one video comparing the Behemoth to the Huma moderator? Thanks.
I don’t have a Huma moderator for the Leshiy 🤷♂️ sorry
66 decibels with the stock baffle is quiet as heck. My stock aea element 22 is at 92 decibels with 16 grain pellets.
Great Video!👍🏻 What diameter of Power Jets do you use?
Thx ! 0.3
@@Airbuks do you use one .3 and one .0 or both .3?
@@phwey1664 both 0.3
Hello mate ...which one would you prefer this or impact M3?
🫣 I very difficult question ! They are both very customizable but very different, the L2 is definitely the most fun . The impact is much more versatile when you want to shoot heavy projectile and long distance but you need to be prepared to thinker and know how to set it up . For me If I could choose only one ☝️ then it would still be the M3 .
what is the price of this rifle unit and how do you order it, friend 🙏🙏🙏
I am not a shop 😉
If you had to keep only one gun in your possession would it be the leshiy 2 or impact m3? Both are bad ass!
That’s a question you should not ask 😉 but then it will be the impact M3
@@Airbuks lmao! I’ve Never owned a leshiy but I would break fingers if someone tried to take my m3!
@@justinhromek73 🤣👍
Different guns for different purposes.
Edit:
If I could only have one I would pick the one that took the least amount of parts and maintenance, and that would be the Leshiy 2. Because if you could only have one you're either poor or in an apocalypse, and an M3 is not what I would want in either situation. Having said that, if it were an apocalypse I would want a break barrel in 25 cal.
what brand of digital pressure gauge is that and the thread size?
Sekmeth 1/8bsp 👍
What jets are in the .30 350mm?
2x 0.3
New sub here. Thanks so much bro!
Thx for the support mate
so you guys DO have the quick loader got 35 cal
Not sure if they make one in 35 🤔 check EDgun.shop
Me encantas estos rifles pero no tengo🥺🥲😭
Pero tus contenidos son los mejores amigo
What brand is the tripod
It’s a Sirui
Thanks. Do you know the model number? All your videos have been so helpful.
@@sterlingagency5214 SIRUI TN2 CARBON STATIEF + K-20II
How much these are crazy expensive, out of my budget lol. I know there awesome it should be awesome for the price
Yeah , I know . If they would be a little cheaper they would be within reach for more people 😬
Hau to by begimot?
Link in the description
Harganya berapa ?
Gi mana cara belinya ?
Meanwhile back in Florida I’m building my latest AR platform carbine rifle.
Sweet 👌
Подскажите модель штатива пожалуйста
Sirui TN2 with the K20II ballhead
0:38 @super private super safe range@ - somebody walking above target=))
That’s the landowner itself , don’t worry as the 180m range slopes upwards and has a dirt bank at the back 😉 between where I sit and at the back the height difference is several meters
Que arma incrível
English?
Nice one 👍😊 new subscriber here 😊
Welcome and thx for the support 🙏
ALLAHU MUHAMMAD
😶😍😘
✌👍👍🙏
that's quiet... even donny fl cannot compared
It works very good , but to be honest the Donny kit for the Leshiy with the ronin or emperor is just as quiet but doesn’t look as good
piace;ma il €€;compri una vera arma e migliore.