ArcDroid: THC Part 2 - Making Divided Voltage PCB and Updated Info
HTML-код
- Опубликовано: 30 июл 2024
- Final design and build of my adjustable divided voltage box for the ArcDroid Torch Height Compensation. Some CNC Router and CNC plasma action throughout. A real time full length cut at the end.
If you've found this information useful and would like to contribute, now you can at www.buymeacoffee.com/ampmechanic
0:00 Stepper motor problems on my CNC router
1:40 Cutting the Voltage divider PCB and talking about what caused the problem with the THC and why 100:1 works.
4:00 The possible solution that is built in
5:15 Why I opted for an adjustable divided voltage board
8:30 The finished box and wiring harness
10:01 Hooking it all up and testing with numbers
15:17 My settings and results thus far. Actual numbers.
16:20 Testing those settings on a long and complex cut. This is a long one in real time. Видеоклипы
Well now I'm worried. I just ordered mine, I hope it doesn't have problems. it cost me 3800 Canadian.
Many of the major problems have been ironed out. THC is still a little temperamental but usable. I can't say too much but there is a THC focused update coming at some point. Will be a much smoother running rig.
Great timing. 9 o’clock Thursday night in Australia hoping for more updates on the arc droid. Suddenly here you are 👍Mine it’s still on the way from America hopefully it will get here the same time as my Hypertherm 45XP interface cable. 😃👍 Thanks very much for posting this video.
How big of a square can it cut
Rectangular cut area dimensions are on the ArcDroid website. Might be 15x26 inches or so.