what makes it even worse is that they ruined mario 64 XD mario 64 survived all this time with the help of various speedrunners and now they cant even do that since nintendo they used a patched japanese version of the game. it patched loads of bugs including the backstep glitch :)
One has to wonder, because there are emulators embedded into 3D All Stars, would one need to use dolphin? Could you fuck around and use 3D All Stars to run N64, GC, and Wii games?
@@Mi_kid05 actully go to this website damota.me/ssnc/checker/ then type in your serial number and if its green that means your switch is not patch and you can mod it
If you have a new switch or a switch lite you currently have to wait on another exploit or the modchip from SXOS, I suggest not updating firmware at all until you are able to hack your console if you really want it.
CatBoy126 YT hey man so I checked the website for me it got yellow meaning it can work but there’s a slight chance it won’t would it be possible to hack
What is that thing called that you slide into the right slot before the controller? I would like one. It makes the 9 and 10 wire exploit easier, doesn’t it?
How do you get the games to be recognized on Dolphin? I have been trying to figure this out for a while now. I thought I could just put them in a folder and find them but I have yet to be able to find them.
Hi I was wondering if you could help me, I did everything you said as you said, but my gamecube games do not work as smooth as yours, they are very laggy and slow, any ideas on how to fix it? pleas help!
I got everything working but when I try to play some GameCube games it will just crash at random times early on. Is there any sort of fix I can do to stop crashes? Should I just download and use the GameCube bios? Any help is appreciated
Before the tutorial started you said something about a USBC cord and a “Conte.” How do I do that or where can I get it? Also where can I get an RCM loader and how do I put GameCube games on the switch?
The Nintendo Switch does not boot custom firmware out of the box when you buy one, in order to achieve the actual boot into anything other than Nintendo firmware, you have to run an exploit which requires the device to be in recovery mode and you to inject a small code into it while in recovery mode which allows the booting of non-Nintendo software. The firmware is all indeed stored on the SD, but without booting into the vulnerable recovery mode, you cannot run it as that would not be in Nintendo's best interest in any situation.
all these videos i see are running lakka for the gamecube emulation and thats linux based. im using atmosphere and retroarch for my emulation. latest one i managed to get running is the sega dreamcast for sonic adventure etc. is there a guide that shows how to get the gamecube emulator running on atmosphere? even if its not part of retroarch? im still a noob at this so idk if lakka will conflict with atmosphere since its linux based from what i have picked up.
The reason for using Lakka is because it runs it with better system privileges, meaning when you are running atmosphere and RetroArch simultaneously you will not be able to get as much power from the machine as if you were to use Lakka. Lakka is a finely baked Linux cake that only has a handful of tasks to do (mostly being just running your ROMs), while running the atmosphere version of Horizon OS uses tons of tasks and lots of GPU and other hardware specs.
Furthermore to fully answer your question, Lakka runs entirely separate from the Switch prebuilt firmware it comes with. You would run Lakka as a side OS and load through Hekate just as you would your CFW
@@ThisVidIsInHD I see. So i may need a bigger SD card to be able to do it as the one im using is only a 64gig cut in half for emunand and the other half for official firmware. Also it sounds to me like Lakka the way ur explaining it may run my roms better than Retroarch does since it takes less resources to do the same thing. So i may have to download and learn how to use Linux then?
will you get banned for going online on a switch youve done this on? really interested in switch emulation but still want to be able to play stuff like new horizons online with friends
I hacked mine after I realized I don’t play online much. Nintendo will find your console and not let you use the internet anymore for the Eshop or any bought games. However if you get tinfoil and nut server working you can update your games still. Plus even let it work as an Android tablet so you can use it for Xbox play station and stadia game streaming on the go
Austin Payne you hit the nail on the head I’ve been in limbo about how I wanted to do it. I think I’m going to buy another switch then hack my Lite one
Just turn off ur switch be4 u play online to be extra safe (turning off removes mods) or at the very least make sure u dont have cheats on tho maybe a visual cheat like a mario skin in splatoon or something would probably be fine
I really wanna play twilight princess but my serial number is XJE7 is that hackable bc i cant find it anywhere on the internet and no one knows about it
Does anyone know if this will work with eternal darkness? Dolphin on PC will play it but trying it on mobile is a bust, I really wanna be able to play this game on the go
Is lakka safe without a banned console? I use emunand with incognito so I can still play with my family on sysnand with ofw. Will this get a switch banned?
@@castleshop5277 So if I just set up the other config and use hekate to launch it, leaving everything currently as is on my SD (atmosphere on emunand, stock on cfw and stock on ofw boots), it shouldn't touch any of that?
Here is an easy to follow text tutorial that I just wrote while I make the other video. It takes me a while because I have a lot of shit to do besides this. homebrew.directory/lakka/
@@bigbato9324 Not if you have emunand and a clean sysnand to play your online/legit stuff. Although just be sure to activate incognito and 90DNS for emunand and you'll be good to go. It's not an 100% guaranteed protection from a possible ban, but it does greatly reduce the chances of it happening.
@@EpsilonChurchRVB wow, please answer. I downloaded Nintendo Switch games on websites such as switch-xci, NXbrew, switchbounty, for me to play on my Nintendo switch CFW, can the game from that website be played in online mode with the way you said? will it work?
@@bimochitarrista As long as the NSP files are clean, they will work, online or not, but going online through any type of backups can lead to an instant ban. There's no other way around it, unless you choose to play offline.
Superwilly 83 You need to over click the device. It is not risky as long as you don’t leave it running and you are afk and don’t use the top settings in the overclock settings
Yes, it's a payload, so take is just as you boot on another OS by injecting a payload that is on your SD Card, and when you don't inject it, the switch OS boot ^^
The way you would boot this particular OS would be the same way you boot back into custom firmware or official firmware. Once you are in Hekate from the bootloader you can boot anything from there.
@@sheluvv_instant think of it like this. You take an sdcard and put a whole other firmware on it. When you launch that firmware you're not accessing Nintendo servers. Swap out that sdcard or not and nintendo can't really tell that you installed a whole new os. Since the original switch os and lakka os don't interact with eachother.
Hey there! I’m just starting to look at getting a GC emulator on the switch. It appears that this is still the most current and best working emulator? Thank you for the easy to follow tutorial!
download roms online then make a folder on the root of ur sd card called "roms", to into the emulator and specify the folder with the roms in and ur done
Might I suggest ditching the rcm pin method (even tho I see you have a nice device for it) and installing auto rcm. You lose regular boot as you will always boot into rcm but if you have a device that pushes a payload why does it even matter? You can boot stock from inside hetake Also no wear on the pins
@@castleshop5277 I personally haven't had any issues that caused corruption or anything like that. The only issue I have had was that when updating stock it throws you back into normal boot which means youd have to find another way to get into rcm mode to reinstall autorcm which can be a pain without a proper tool.
@@castleshop5277 Also Auto rcm is recommended all over the place. I have it working just fine, you just have to be aware of the fact that rcm does not equal off mode. If you have a backup of boot partitions what could even be the worry?
@@adamguzman1130 The issue is that there is not a ton of actual data behind it. We know what it does and why someone would want to do Auto RCM. The biggest fact about it is that its a physical change in the system settings, which is generally not recommended. If you do not care about a ban or CDN restriction then by all means I would do it. The average user in my experience wouldn't be experienced enough to understand what it does to the system, hence manually putting it into RCM mode would always be the safest choice. I would never do this option for anyone. I repair switch systems locally where I live and you can't even imagine how many customers I have coming to me saying 'my switch is black screening, I bought it from a guy on OfferUp and now its broken and he wont text me back'
No you cannot with Lakka. Retroarch is a good fall back of docking is an issue, but currently does not support Gamecube (looking hopeful now though after the all stars emulation discovery)
There's no way for the Switch, but hackers are looking into it, but the only way they say is by using a mod chip which you wouldnhavr to open. Right now they're in beta testing.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Here after the discovery that literally the entire Mario 3D Allstar Collection is emulation, lol.
what makes it even worse is that they ruined mario 64 XD mario 64 survived all this time with the help of various speedrunners and now they cant even do that since nintendo they used a patched japanese version of the game. it patched loads of bugs including the backstep glitch :)
Omg its the legendary minty meeo!
LOl
@@nathanvella960 backwards long jump*
@@nathanvella960 so long gay bowser
One has to wonder, because there are emulators embedded into 3D All Stars, would one need to use dolphin? Could you fuck around and use 3D All Stars to run N64, GC, and Wii games?
i love this now i can play mario kart double dash im subbing
@@Mi_kid05 actully go to this website damota.me/ssnc/checker/ then type in your serial number and if its green that means your switch is not patch and you can mod it
@@Mi_kid05 mainly the older ones
@@Mi_kid05 only if your switch is not patched, you can google how to find out if your switch is patched
If you have a new switch or a switch lite you currently have to wait on another exploit or the modchip from SXOS, I suggest not updating firmware at all until you are able to hack your console if you really want it.
CatBoy126 YT hey man so I checked the website for me it got yellow meaning it can work but there’s a slight chance it won’t would it be possible to hack
How did I miss this video??? Freakin' Love Gamecube!!
Still using windows 98 in 2019
its windows 7..
Lenny Face Yes it is lmao stupid ass
Lenny Face I suggest you don't call people dumbasses when you don't really know what you're talking about in the future.
@Lenny Face yeah you fucking bitch 😆
@Lenny Face yeah have a good day
This gives me PS3 vibes and I love it
I subbed just for this vid! Hopefully more to come!!!
Thanks!
same here lul
Is this an emulator? Or does the Switch run a gamecube game
What even is your profile picture -
@@alexx960 It’s a neck and a body but youtube uploaded it upside down somehow
@@dumpmuch its emulation
What is that thing called that you slide into the right slot before the controller? I would like one. It makes the 9 and 10 wire exploit easier, doesn’t it?
How do you get the games to be recognized on Dolphin? I have been trying to figure this out for a while now. I thought I could just put them in a folder and find them but I have yet to be able to find them.
on ismyswitchpathced the serial number prefix on my switch doesn't matchup with any of the ones on the website does that just mean i'm patched
I need help because my screen just went black and that’s it
Same
@@fhxis thats normal just delete this files and reinstall it because ,sometimes files can be deleted when you install it
question, is the current state of RetroArch on Switch as fast as the latest (year old) build of Lakka? I'm debating which to stick with but I'm unsure
Does this support multiplayer? Also, is this an app on the switch or an entire menu change?
I happened to have extra sd cards laying around 🤔
I use a simple 16GB for my lakka, just switch out games and save money. I have an internal 12TB for my stuff in my PC
How do you even add the games to your sd card
Hi I was wondering if you could help me, I did everything you said as you said, but my gamecube games do not work as smooth as yours, they are very laggy and slow, any ideas on how to fix it? pleas help!
I got everything working but when I try to play some GameCube games it will just crash at random times early on. Is there any sort of fix I can do to stop crashes? Should I just download and use the GameCube bios? Any help is appreciated
try booting into a game while holding r so then homebrew has full permission to write to memory
Trying to boot SSX Tricky. Just hangs at black after showing the title/controller screen. Any suggestions?
Before the tutorial started you said something about a USBC cord and a “Conte.” How do I do that or where can I get it? Also where can I get an RCM loader and how do I put GameCube games on the switch?
You need a 'rcm jig' and a USB C cord and a switch that shows green/yellow(possibly patched) on ismyswitchpatched.com
You need a 'rcm jig' and a USB C cord and a switch that shows green/yellow(possibly patched) on ismyswitchpatched.com
He said “Hekate”
@@castleshop5277 whats an rcm jig?
@@segty5301 Google is a great resource.
Can anyone help me but my Lakka just loads to the lakka flower/tree thing and i leave it for like 10 minutes and it’s still on that can anyone help
does this still work if you already have atmosphere installed? can you have both in hekate?
Thanks for the video! I’ve got everything working except I can’t get the GameCube games to load. Do you have to put them somewhere specific?
Use the overclock settings!
can you still use your switch like normal if you want? like without being in lakka
Finally, I can play Metroid prime on the go
What about Prime Pinball?
@@julianx2rl the best metroid alongside federation force? fuck yeaaaah brotha
@PlopFish it ruins the magic.
@@pugg5ter542 how?
@@tranquility6789 the fact how your playing this Nintendo game on a Nintendo system it feels a lot less scummy
Would you say its worth it to buy unpatched switch or just buy the better battery life one.
can you explain why you have to use an injector every time you boot the switch shouldn't it have the custom firmware on the memory card
The Nintendo Switch does not boot custom firmware out of the box when you buy one, in order to achieve the actual boot into anything other than Nintendo firmware, you have to run an exploit which requires the device to be in recovery mode and you to inject a small code into it while in recovery mode which allows the booting of non-Nintendo software. The firmware is all indeed stored on the SD, but without booting into the vulnerable recovery mode, you cannot run it as that would not be in Nintendo's best interest in any situation.
@@castleshop5277 ok that makes more sense now
all these videos i see are running lakka for the gamecube emulation and thats linux based. im using atmosphere and retroarch for my emulation. latest one i managed to get running is the sega dreamcast for sonic adventure etc. is there a guide that shows how to get the gamecube emulator running on atmosphere? even if its not part of retroarch? im still a noob at this so idk if lakka will conflict with atmosphere since its linux based from what i have picked up.
The reason for using Lakka is because it runs it with better system privileges, meaning when you are running atmosphere and RetroArch simultaneously you will not be able to get as much power from the machine as if you were to use Lakka. Lakka is a finely baked Linux cake that only has a handful of tasks to do (mostly being just running your ROMs), while running the atmosphere version of Horizon OS uses tons of tasks and lots of GPU and other hardware specs.
Furthermore to fully answer your question, Lakka runs entirely separate from the Switch prebuilt firmware it comes with. You would run Lakka as a side OS and load through Hekate just as you would your CFW
@@ThisVidIsInHD I see. So i may need a bigger SD card to be able to do it as the one im using is only a 64gig cut in half for emunand and the other half for official firmware. Also it sounds to me like Lakka the way ur explaining it may run my roms better than Retroarch does since it takes less resources to do the same thing. So i may have to download and learn how to use Linux then?
will you get banned for going online on a switch youve done this on? really interested in switch emulation but still want to be able to play stuff like new horizons online with friends
1:20 how do i get in these settings? I have auto rcm activated and use a rcm loader
Did you find the answer?
@@lionrapperful no sadly
Hi is there a was to configure the Joy cons to Work with Wii Games? Because IT doesnt work.
why not retroarch for nintendo switch? is it really that bad?
Lakka is a Linux Port with retroarch
No Gc / Wii emulation
Question: can I still play my normal games on the switch when I do this?
Yes all you have to do is exit out the program and or restart your switch
This is great great video dude
Can you still use Nintendo os once you custom flash switch? Or say goodbye to the eshop?
I'd say this is worth buying a second Switch for, one intact and other modded.
I hacked mine after I realized I don’t play online much. Nintendo will find your console and not let you use the internet anymore for the Eshop or any bought games. However if you get tinfoil and nut server working you can update your games still. Plus even let it work as an Android tablet so you can use it for Xbox play station and stadia game streaming on the go
Austin Payne you hit the nail on the head I’ve been in limbo about how I wanted to do it. I think I’m going to buy another switch then hack my Lite one
very useful! also do I need to download bios files?
Do they penalize Nintendo online service for you if you jailbreak it?? I still wanna play online with the jailbreak too 😭
Just turn off ur switch be4 u play online to be extra safe (turning off removes mods) or at the very least make sure u dont have cheats on tho maybe a visual cheat like a mario skin in splatoon or something would probably be fine
Are you able to inject save files in too?
I really wanna play twilight princess but my serial number is XJE7 is that hackable bc i cant find it anywhere on the internet and no one knows about it
so i tried to load it and it just crashed any help?
Just to confirm, all this does is run off the SD card and doesn't effect your switch beyond that?
wowmartiean You have to have custom firmware installed in order to run it
does this ONLY work with hekate? or does it also work with atmosphere?
Hekate is just a payload. This doesn't actually even touch atmosphere.
This only for og switch? I really wanna play Pokémon Colosseum and Gale of Darkness but both copies are like 100-200 dollars each on eBay.
rumors that switch lite is hackable, so patience is the key
The SXOS team has a modchip coming soon, its going to be simple to install supposedly though, nothing like xbox 360 jtags from back in the day.
Does anyone know if this will work with eternal darkness? Dolphin on PC will play it but trying it on mobile is a bust, I really wanna be able to play this game on the go
Can you make a video showing how super smash bros melee runs? It’s not a super demanding game and also how is the input lag?
If I do this i'm assuming my normal CFW will stay correct?
I have autorcm on, can I just put lakka to separate sdcard and run hakate payload and do everything you can afterwards?
A year later. I’m
Late. Can you do this ?
@@Kla2024-s5t didnt try it actually now I have fold2 and Im playing on it it has better fps xD
Hey so I try booting it up but it leads to a black screen. Atmosphere works fine so my switch isn't patched. Not sure what to do
I would try a different SD card if possible
It has to be FAT32.
Im going to be hacking a switch but i want to know how to not get banned
Can’t you use retroarch? I thought Lakka was obsolete after retroarch.
Will over clocking to what you recommended damage the switch?
CubicSquare overclocking to 1785 CPU and 921 GPU is safe as the switch was built to run at those
Where do I actually get the dolphin core? Only thing I'm missing
Will this get you banned online
can you still use your old switch games after??
The wii emulator have motion controls? And it's possible to play on TV?
Sadly not yet. Lakka only has support for wired(hanheld) controllers and no dock support so far
@@alfiegordon9013 ;-;
When I open Lakka, my switch crashes and i am just getting a blackscreen
@Jason did you found a solution? Because I didn‘t...
is lakka the best way for gamecube? I'v heard it sucks over PPSSPP for the PSP
PPSSPP works somewhat, GameCube is only support by Lakka as it uses the full specs on the switch to run it
my switch shows the lakka loading icon and then just goes to a black screen. What's going on?
Nightime Burnout I would redo your entire SD card setup. Backup your saves first.
do i have to use the rm loader every single time it boots?
Troll Stars I think so
@@saii7735 there is auto rcm
Is lakka safe without a banned console? I use emunand with incognito so I can still play with my family on sysnand with ofw. Will this get a switch banned?
Runs entirely separate from the Nintendo side of the switch. Theoretically it's ban proof ONLY using lakka
@@castleshop5277 So if I just set up the other config and use hekate to launch it, leaving everything currently as is on my SD (atmosphere on emunand, stock on cfw and stock on ofw boots), it shouldn't touch any of that?
Here is an easy to follow text tutorial that I just wrote while I make the other video. It takes me a while because I have a lot of shit to do besides this. homebrew.directory/lakka/
wen
android 10 ?
When I load Lakka, the interface does not look anything like this video, what do?
How do u download the roms?
@@jmz2144 Change driver to xmb.
Twilight Princess can barely run for even with overclocked settings any tips??
no i think thats just a bad emulation even on my computer i only get like 15fps on it
Great only need to copy and paste some files :) i thought it would be the same process as getting android/l4t running
If I use lakka when I return to the stock operating system can I continue to play online games?
@@bigbato9324 Not if you have emunand and a clean sysnand to play your online/legit stuff. Although just be sure to activate incognito and 90DNS for emunand and you'll be good to go. It's not an 100% guaranteed protection from a possible ban, but it does greatly reduce the chances of it happening.
@@EpsilonChurchRVB ah I see, thank you for the correction :D
@@EpsilonChurchRVB wow, please answer. I downloaded Nintendo Switch games on websites such as switch-xci, NXbrew, switchbounty, for me to play on my Nintendo switch CFW, can the game from that website be played in online mode with the way you said? will it work?
@@bimochitarrista As long as the NSP files are clean, they will work, online or not, but going online through any type of backups can lead to an instant ban. There's no other way around it, unless you choose to play offline.
Are you usin g the longer battery switch or the original it is important to know
There’s no exploit for the new version. How on earth he could be using the longer battery switch !??
Mariko/iPatched units have no exploitable assets as of yet
Though can I have atmospher and this running?
will the nintendo switch battery die fast
Yes 30 minutes
How do you keep up that fps?
Superwilly 83 You need to over click the device. It is not risky as long as you don’t leave it running and you are afk and don’t use the top settings in the overclock settings
@@castleshop5277 it works with zelda windwaker?
Superwilly 83 It “works”. Not well though, windwaker is a tough game to emulate as it uses a low of power to run.
Thanks!
@@castleshop5277 over click? you meant overclock?
how do i get more games aside from super mario sunshine?
What other games have you run that perform to a playable level ? Also if I overclock will it deplete my battery life in the long run ?
If you have the OG switch the battery is doomed anyways, just upgrade it at a local shop or send in service OTHER THAN NINTENDO lol
ThisVidIsInHD the battery is actually ok in the og switch and the og switch is the only hack able one
Do you need Linux or atmosphere for this? I’m not very knowledgeable on stuff like this so I’m at a loss when Lakka won’t load :,)
You just need an unpatched switch!
Will you be able to go BACK to the regular switch after download?
Yes, it's a payload, so take is just as you boot on another OS by injecting a payload that is on your SD Card, and when you don't inject it, the switch OS boot ^^
The way you would boot this particular OS would be the same way you boot back into custom firmware or official firmware. Once you are in Hekate from the bootloader you can boot anything from there.
My bad if I'm annoying but I don't understand what you said cus this is my first time
@@castleshop5277 so the switch will not get banned and you can resume playing your switch games once you are done?
@@sheluvv_instant think of it like this. You take an sdcard and put a whole other firmware on it. When you launch that firmware you're not accessing Nintendo servers. Swap out that sdcard or not and nintendo can't really tell that you installed a whole new os. Since the original switch os and lakka os don't interact with eachother.
TYSM! Now I can play simpsons hit and run on my switch lol
After doing this can I go back to normal switch
Hey there! I’m just starting to look at getting a GC emulator on the switch. It appears that this is still the most current and best working emulator? Thank you for the easy to follow tutorial!
Realistically the only working NGC emu for the switch as of March 2020
Dolphin
weegie_ zelda Thats on pc tho
For use with SX OS?
I'am on Auto RCM,how i can run this?
Maybe it works, I'll see it, Retroarch doesn't work for me
Is it not working because you haven't held r while opening another app to then access the retroarch homebrew app
you need to hold the r button while opening game. using the album app gives you limited ram,thus leading to your crashing problem
Is split joycons possible?
sonic heroes plays like crap. am I doing something wrong or is it just a demanding game? and yes, I tried to overclock
Thanks for the warning. Was gonna do this just for that game
Can we play wind waker and twilight princess? And how do I download the games?
download roms online then make a folder on the root of ur sd card called "roms", to into the emulator and specify the folder with the roms in and ur done
Question does it go back to the regular switch
Yes you just simply reboot, this runs separate from the switch firmware
@@ThisVidIsInHD thanks
I'm too paranoid nintendo is gonna brick my system to actually do this but id love to play ttyd on switch
I just run everything off the SD card and turn off my wifi before playing on CFW; honestly the best bet
what is a rcm loader?
do you know how to setup cheats?
Might I suggest ditching the rcm pin method (even tho I see you have a nice device for it) and installing auto rcm. You lose regular boot as you will always boot into rcm but if you have a device that pushes a payload why does it even matter? You can boot stock from inside hetake
Also no wear on the pins
Auto rcm is generally not a recommendation anyone makes. Not to tell you not to do it, but it has been known to cause system issues in the past.
@@castleshop5277 I personally haven't had any issues that caused corruption or anything like that. The only issue I have had was that when updating stock it throws you back into normal boot which means youd have to find another way to get into rcm mode to reinstall autorcm which can be a pain without a proper tool.
@@castleshop5277 Also Auto rcm is recommended all over the place. I have it working just fine, you just have to be aware of the fact that rcm does not equal off mode. If you have a backup of boot partitions what could even be the worry?
@@castleshop5277 Is there increased ban potentiality or something or is there actually potential to corrupt the system and cause brick?
@@adamguzman1130 The issue is that there is not a ton of actual data behind it. We know what it does and why someone would want to do Auto RCM. The biggest fact about it is that its a physical change in the system settings, which is generally not recommended. If you do not care about a ban or CDN restriction then by all means I would do it. The average user in my experience wouldn't be experienced enough to understand what it does to the system, hence manually putting it into RCM mode would always be the safest choice. I would never do this option for anyone. I repair switch systems locally where I live and you can't even imagine how many customers I have coming to me saying 'my switch is black screening, I bought it from a guy on OfferUp and now its broken and he wont text me back'
Can I turn my switch normal again?
do i need to oc it?
Can u still play switch games
I have a question it's playable on tv mode?
Nope. Sorry.
Can I install lakka in the same flashed sd card that I have android running.
It should be possible but it will be a complicated formatting
Can you still use the dock though?
No you cannot with Lakka. Retroarch is a good fall back of docking is an issue, but currently does not support Gamecube (looking hopeful now though after the all stars emulation discovery)
@Castle Gaming
Oh, ok.
Does it work with a usb
Will this work on a switch lite?
No
What i discovered his that this is actually retroarch just the logo has changed
can retroarch play gamecube games?
I was hoping u were saying hekate and not lakka but yea Im doing this in a couple days once I get home
How would one do this on the switch Lite?
There's no way for the Switch, but hackers are looking into it, but the only way they say is by using a mod chip which you wouldnhavr to open. Right now they're in beta testing.
Mr J OO7 alright thanks
now the modchip can be Pre order, but that's not cheap/
Can you still play online with this emulator on the switch?
No it does not support online
Let me be clear, this runs separate from the switch as its own flavor of linux, completely separate from Horizon OS
Can it run GameCube ?
Where do we put the roms
Right on the SD with the build, as long as its in the lakka folder
Nice I literally have hekate Im totally doing this when I get home