Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
this is awesome! I want to do the same as you did relocating the electronics lower. Any tips you found along the way? I'll likely be replacing with a smaller battery as well.
@@Arthur-osama i have a Kawasaki Vulcan 800 Well my VN is at mechanic for like a month now, should be done next week FINALLY Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian İt was the starter clutch the problem after all İ HOPE Had to order it from Japan... could not find it here in Romania Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike İ rly need it in June for a couple bike fests
Para mí gusto le faltó alguna tapa lateral, así no se ven los cables y la batería. Luego unos escapes más cómodos a la hora de conducir y que no se vean las soldaduras. Y por último en vez de hacer publicidad a una marca de whisky pondría otra cosa o directamente nada
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
Hey I just got a vt600 shadow and I have a question, where the frame was cut it hits the fork and they dent each other, i don’t know why, I mean these are stock parts I think there should be some sort of end stop when the shock also is fully compressed and the frame should have a minimum of clearance. If you have an email to give me I’d like to send you some pic to make you understand better. Thanks
Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
That sound is awesome.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Thank you so much for yout comment ! I'm glad you like this restoration 🙏🙏😁😁😁😁
Killer work! The exhaust sounds as good as it looks!😎👍
Thank you my friend 🙏🙏😁😁
Right 👍 on man.awesome bike cool music in the back ground
super clean, great work
Gorgeous bike, love the exhaust. Looks like you were able to do it all pretty quickly too
Thank you kris for your comment 🙏,i finished this bike in 4 months 😁👍
love how you put the rear fenfer great job beatiful bike
Thank you my friend 😁😁🙏🙏
love the color, it looks incredible
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
Ein Traum, habe mich verliebt in ihr..❤🤪🤪🤪🤪🤪🤪😄
Beautiful 👏✌️
Bike looks beautiful. Great work!
Superb job. Inspirational.
Thank you 🙏🙏
Hell of a job!!! These hondas make some nice bobbers
Thank you 😊😊yes honda bikes is good for make bobers 😁😁
Looks nice and sounds awesome
Thank you 😁😁😁🙏🙏🙏
looks good sounds even better
Looks great. I like everything except the stock air box.
She's a beauty. Good work.
Thank you 🤩🤩🤩
Stunning 👍
great job. sounds fantastic!!!👍🤙 thank you for this 15 minutes.
Super sweet 😮
Awsome!
Wow incredible job!
Awesome job!
Thank you so much 💪💪
Beautiful, great job!
Nice 😎😎
Nice!👍😎
superrrrr motor❤
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
Wicked finish 🔥 quick ride would be nice tho
beautiful sound
Exhaust note sounds great 👍
Thank you 😁😁😁
Keep strong bro ❤❤❤
Nice
Superp bro i like it
Pfouahhhhhhhh magnifique travail !!!!!!
Merci beaucoup ! 😁😁
That sound👌👌
I'm a Harley rider I build bobbers out of them but this bike is cool nice job I have seen some cool metric chops and bobbers 👍
tres bien! very nice, color looks amazing.
Merci beaucoup 😁😁
nice work man
Thank you so much 🙏😁
Nice bro..👌👌👍
Thank you bro 🙏🙏💥💥
1 funky bike 🥳
Thank you 😍
Félicitation y'a pas a dire c'est vraiment une restauration ULTIMATE ( subaru un jour subaru toujours )
Merci skynet sa fait plaisir 😁😁😁
Show 👋👋👋👋👋
wrap those pipes cus they melt the boots
Super taff, rien à dire une bête maintenant.
Merci beaucoup sa fait super plaisir 😁😁
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
WOW!
Trop belle ❤❤❤❤
Merci beaucoup 😁😁😁
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
SUPERBE ...
geil
this is awesome! I want to do the same as you did relocating the electronics lower. Any tips you found along the way? I'll likely be replacing with a smaller battery as well.
Linda. Cual es el modelo del caucho o llanta trasera por favor?
Nice work ,the only thing thats going to spoil it is number plate
It sounds great, but it would look a lot better with a solid chrome exhaust.
Muy buen trabajo 👍👍
Thank you 🫶🫶
Combien coûte la fabrication d’une de ces machines ?
😮 AMAZING 👏🏻 💚
Good job,i don't like bobbers but looks sick 👌🏻
Thank you my friend your comment makes me happy 🙏🙏😁😁
@@Arthur-osama i have a Kawasaki Vulcan 800
Well my VN is at mechanic for like a month now, should be done next week FINALLY
Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian
İt was the starter clutch the problem after all İ HOPE
Had to order it from Japan... could not find it here in Romania
Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike
İ rly need it in June for a couple bike fests
Para mí gusto le faltó alguna tapa lateral, así no se ven los cables y la batería. Luego unos escapes más cómodos a la hora de conducir y que no se vean las soldaduras. Y por último en vez de hacer publicidad a una marca de whisky pondría otra cosa o directamente nada
Great job looking awesome bud, could I ask what risers and bar you used
The iron has become hot!
Kirrály !! (king !)
I'm getting ready to do a similar build, when you went with open exhaust pipes did you have to reset the carburetors ?
You you cut off the rear fender mount and it seemed as if you put something back them under the seat area what is it?
Тот случай, когда было лучше, чем стало....
Did you can spray or use a auto sprayer to paint frame ?
❤️
gostei ficou mais bonita😎
any idea what size jets you used with the drag pipe set up? cheers
In my heart and mind I would love make my Steed rear fender just like this, but unfortunately will not work on our wet road. 😭
just no words ahaha👌
Thank you 🙏🙏😁😁
@@Arthur-osama tchau
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
Wow! Raw Fucking power
Thank you 🙏😍
Stock handle bars or aftermarket? If latter, which are they ?
kool, whats the length od yr petrol tank
🤙🏻🤙🏻🤙🏻🤙🏻
❤
Más hermosa que antes
Ajusta las válvulas 💥💥💥💥
I have bad jetting setup on the video 😅😅
Bacana e o melhor fácil...
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
@@Arthur-osama niquel alors merci pour votre réponse aussi rapide aha 😁
Very nice build and video! Did you make any changes to the carb? Like jetting it?
Thank you ! Yes little jetting upgrade like 5 points
Hey I just got a vt600 shadow and I have a question, where the frame was cut it hits the fork and they dent each other, i don’t know why, I mean these are stock parts I think there should be some sort of end stop when the shock also is fully compressed and the frame should have a minimum of clearance. If you have an email to give me I’d like to send you some pic to make you understand better. Thanks
😍
Luv the exhaust! Can you share info about it ?
Tape "ice exhaust" on google ;)
What rear fender is that brother?
did/does honda make a bigger displacement version of this bike?
They did a 750 and an 1100 if I remember correctly. The VT600 was my first bike back in the 90's.
Sounds like a sponge bob bubble maker
Taka ładna fajna była ta honda oryginalna to tak to zepsuliście
Hi man where did you get the back fender ?
Hii ! On TJ brutal customs website ;)
hey first awesome project! but I'm just wondering how much money you've invested because I'm considering doing something like this myself
Thank you so much ! Im think arround 1500 $ 🤔
Nice Bike Fantastic Color.. Can u please tell the code of color to find it for my bike?
Yes the color is "isle of man green" ans the color code is C4G ;)
@@Arthur-osama thanks a lot my friend!! 🙏
Como amo me gustan una buena boober lo que quedó fea es el color Verde negro sería más bella
Nice!!! What name the color green please???
Its a bmw color the name is green island ;)
Odd question but can u send me a list of all the parts you used I’m in the process of the exact same build
Looks amazing!... Have you ever burnt your legs on that exhaust?
do you mind putting the link from where you got those exhaust ???
I have write the link on the description video ;)
What kind of bracket did you add to the frame where you cut the rear fender support? Excellent job.
I put a reinforcement tube for the frame, and integrated screws to fix the saddle
Thank you 🙏😊