As I said in previous comment, This is a no brainer cordless tool. Combine it with Makita XCV05 Backpack Vacuum and you go totally cordless. Rob, you are my favorite tool reviewer (who cost me a lot!!). Straight to the point, talking about real professional concerns using clear language with tons of great shots and closeups. Please pass my greetings to the rest of behind the scene team. Khalid.
You've earned it. For people like me living in places where the only way to buy non basic tools is via Amazon or prepaid order via local dealer, a tool reviewer is the person I trust on investing my hard earned money. In this congested world of RUclipsrs, you shine in this field simply because I don't have to watch you unboxing a power tool like an iPhone and trying to figure out what it does, how pretty it looks (or don't), read official website info, while trying to be funny. I need someone to tell me if this tool is gonna replace my current one? Will it save me time and money on the go? How powerful is it in terms of professional tasks not in Amps or Watts, etc. Your videos are short and sweet (unlike my comments) and whenever more details are required a link to a full article is provided. That's IMPO how tool reviewing should be. Khalid.
I have owned one of these for almost a year now, This saw makes me look good, I have become dependent on this tool. I construct JukeBoxes out of 3/4 treated plywood, this saw shows its sweet-spot when cutting.
I always wanted a track saw but refused to pay what I thought was way to much money for the Festool. I've had my saw for 3 years, use it almost every day and am looking forward to adding the battery powered unit in the near future. Since the manufactures force us to choose between them because of the proprietary battery issues I made my peace with it, settling on Makita. Even though I think that many of their offerings come in second or even third in some cases the differences are usually small enough that sticking with tools that use the same battery is the deciding factor for me. Any that's only my two cents. What I like most about your videos is how often I simply agree with your judgement (-; . Keep up the good work!
I've had a Festool ts for many years and this Makita cordless might be my next. I truly detest reviews from someone who doesn't use the item in question on a regular basis. That's what makes your reviews credible, you're a carpenter who actually uses these tools for a living. Thanks Update: I purchased the Makita ts and have used it for 3 mo and it cuts, performs on par w/ Festool. The cordless aspect is the reason it stays in the truck for jobsite use. Festool ts stays home for shop duty. This review helped me decide on the purchase. Thanks again
Another great review. 👍 Thank you for putting in the time and effort to bring us these great reviews. Now can you recommend anything for the pain my wallet goes through when it sees me watching your reviews 😜
Hey Rob, I've had this saw for a while now, can't imagine why anyone would spend the money on a Festool, little known fact, the Festool guiderail and the Makita guide rail are interchangeable , and the Makita version is cheaper, HA! Makita track saw is second to none.
In reply to you're question Gary, " what isn't precise ? ". I have extensive experience with both the Makita and Festool track saws as i own the Makita and my partner owns the Festool. Both are excellent saws, but as i admitted to my partner the Festool glides down the straight guide with less wobble and resistance than the akita, also the plunge on the festool seems better, " in my opinion" I would still by the akita, the Festool is not worth the money Mike M
Thanks so much, Rob, for a great review. I’m gonna have to get one of these Makiter sawrs. So if you had a good track saw with the TSO TPG track accessory system and a good router/table, how much need would you still have for a table saw? Trying to build a small shop in rather limited space and a table saw would take up a lot of space.
This popped up in my feed. I really want to get this for my step dad because he helps me so much on side projects. But right now they are so hard to find!
Huh, over one thousand more rpm blade speed over the corded version too. Have you ever noticed if the little extra weight helps in consistent movement and even subduing some minuscule vibes? Great review as always!
It’s not a completely seamless transition. The cordless saw comes with a 1.5 mm kerf blade and the corded blade is thicker. That will make a difference in the splinter guard. If you have both saws it would be beneficial to label which track was used with which saw.
If you cut the splinter guard with the thicker blade first then use the track with the cordless saw your cut line won’t match up because there will be a gap.
That's why I run both Dewalt and Makita. I have drill/driver plus RO sander and palm router from Makita, and everything else from Dewalt. Could probably get by with only Makita tools, but I like the color yellow.
One big difference that I noticed between the corded and cordless versions is that the blade on the cordless version is much thinner. This is a smart strategy for improving battery life but I expect the thinner blade will vibrate more and the cuts won't be quite as good. Are there any issues using it with a thicker blade? When you go from strait to beveled cuts does it trim the black strip on the rail? Will the strip be correct for strait as well as bevel cuts? What is the blue spring loaded wheel at the top of the high adjust track scale for?
How does the power stack up against the corded version? Particularly in thick material, like doubled birch 3/4 ply? Need something that will do the job without running to the battery charger all the time.
Could you answer two questions for me? I just purchased this saw with the 55" and 118" tracks. It seems there is no positive stop for 0 (90) degrees with this saw. The manual mentions positive stops for 22.5 and 90 degrees, but not for 0. If this is true, then the only way to set the saw to 0 degrees would be to loosen the clamping knobs and set the saw to 0 degrees by looking at the arrow on the bevel scale. I don't like trusting my eye to do this. Checking that the blade is 90 degrees to the the saw's base with a square each time I set the saw to 0 degrees seems very tedious, as I feel you need at least two people to do this properly (one person to hold the blade fully plunged and another to check the blade with a square at eye level). Is there something I'm missing here? Also, how would I cut off the rubber strip at each end of the tracks? To do this, one of the tension knobs that holds the saw firmly on the rail has to slide off of the rail to cut off the very end of the strip. Any advice would be seriously appreciated! I've watched just about every setup video in regard to this saw and it seems these issues aren't addressed. Sorry for the length of this comment..
The positive stop is when you zero the tool out it stops automatically and then you just lock the knob I don’t think you’re missing anything. When you use the saw and track for the first time you will cut the rubber on the track if any excess is coming out of the ends just use a utility knife
Rob, really appreciate your real world testing and reviews. Just to clarify, the $499 kit (xps01ptj) does NOT come with the 55" track (06:58). It does come with the other things you mention, which I think makes the kit a very good value (dual port rapid charger, two systainers/makpacs, and two 5 AH batteries for only $150 above the price of the bare tool. I am heavily invested in the Milwaukee M12 and M18 platforms, but bought this saw as my first cordless Makita and love it. Will definitely be picking up the trim router you reviewed earlier.
There were some specials that did include the track. Look for them, especially during the holidays, Father's Day, etc. Also, this Makita track and Festool Track are interchangeable
Would the XPS01Z work with 3Ah batteries? Every review I've seen uses the 5Ah batteries but I'm trying to avoid buying new batteries. I don't expect to make more than 20 cuts in one day, so I'm not looking for much in terms of battery life.
Anyone have a dust port adapter recommendation for connecting up to a Ridgid vac? I’ve got a shop hose with a 2.25” end on it and a “car” hose with a 1.25” end on it. Thanks.
Hey question, I just purchased the 36v track saw, the guide rail has a black rubber strip sticking out where the blade is, does that need to be trimmed off with the blade path? Or does the saw need to be adjusted on the tail to clear that strip?
Rob I don't work as a contractor and I am looking to purchase either the battery or corded version of this track saw. Do you feel that corded powered hand tools are on the way out? I can see the advantage when working mobile no need to roll out extension cords and the ease not to have the cord in your way when you cutting. In a shop do you feel it is worth investing for a cordless saw vs a corded?
Scoring feature is a nice idea, but this is less necessary than a riving knife which seems to be a BIG miss on this saw especially when they put a lot of thought into other features. Agree that wrong size dust port is shameful as is not having blades released at same time as the saw. There isn't a cross cut and rip blade option, seriously? Speaking of which, how were blade changes? Great review Rob, thanks for no nonsense reviews!
Nice review but how about dust control? Without a corded saw how does the vac work without manually having to turn the vac on and off? I have two Makita track saws but need the vac system, if it means having to buy another vac with wireless technology that makes it a fairly expensive purchase.
there is a second, "upgraded" model of this same cordless saw that includes AWS, Makita's wireless tool-to-tool communication platform that will also turn on your vac the moment you engage the saw's trigger. That being said, it is easily $100+ more for this wirelessly capable version in the tool only selection, & I imagine comparable price increases with any kits if they even exist with this guy. Be sure to remember that you need to have purchased a vac rocking that AWS "upgrade" just the same, and indeed these costs would add up rather quickly... then again, could prob pick up both for less than a Festool hahahaha
I'd love to see them make a 7 1/4 circ saw for the 12v line that runs off 2 12v batteries. Their current tiny 12v circ saw is kinda pointless with that sub 4 inch blade. That would be great.
I'm currently researching which track saw to buy. Based on reviews, I've narrowed to Makita or Festool. Obviously a significant price difference. Two concerns I have that I hope people can weigh in about. First, is the absence of a riving knife something I should be concerned about? Secondly, many reviews I read on the makita saw complain about tracks not being straight or flat, or a lot of slop in the movement of the saw on the track. Looking to hear from anyone with input on these concerns. Thanks!
How does it handle thick hardwood rips? Like 8/4 maple or cherry? I'd want to be able to put a straight cut on rough lumber but haven't seen anyone mention how it handles hard work, only sheet goods.
That would be wonderful. I can't think of a better "torture" test in real life that thick hardwood rip cuts. If it can do that I'll be convinced to get this over the corded brother. Rate it 1-10 for task capability. Thank you sir.
Where can I find it at for that price point? Also do you reach for the makita or the dewalt cordless track saw when you are in need of one? Thanks for the informative video keep them coming!
Alternative to a table saw? New to wood working, limited on space and I do not like job site "portable" table saws. I'm dying a Hybrid table saw but, I don't have thousands to spend right now. I am getting good with my circular saw but, it's a pita to setup, too time consuming.
Torn between this and the new Makita DXH08 / DHS782 36v circular which has just been released. The 08 fits straight on the track and has a 190mm blade. Annoyingly there's no reviews out of it yet. Anyone had a go with it? does it cut as nice as the plunge? Can't make my mind up.
Very good video that throughly details this saw. Without a riving knife, did the saw ever kick back or bind up on thicker or more dense materials? OSB & ply can be bowed through its length or across the middle. How do you keep the track flat across the material on those crosscuts? Sub'd
Im still trying to figure out what the round teal colored circle at the top of the depth gauge is. Its works like the 2mm stop, but its deeper. Not sure what this preset is for
Do you have any tips for calibrating the saw to cut a perfect 90 degree cut? I was cutting some tops for a bench and when i went to join the i couldn't get a tight joint. I realized it was due to not being perfect 90. Couldn't figure out how to set the set screws just right. Anyone got any tips?
highlineR32 there are non-stick strips on the bottom but keep it in place, however the best practice is to use clamps they attacked on the bottom of the rail
Hey Rob, watched the vid on Makita cordless track saw, I have the corded version because i want the power in that particular application, that said I bought the Makita instead of Festool because their so similar in performance, they even share the same fence, except the festool copy is more ? The Makita gives a lot more bang for the buck, doesn't quite have the precision of the Festool. Mike Mancini
Michael Mancini adjust it to the track properly so there is not to much slop to the track my makita is nearly two years old and is still bang on accurate. A mate of mine has the festool and it's no more or less accurate. I'd stick to my makita.
I have a small garage shop with no room for a table saw. Do you think the track saw can make the cuts through hard wood for smaller projects like cutting boards and boxes or is it strictly made for sheet goods? Trying to decide between a track saw and a band saw.
David Hurst you would need something like the festool mft table to do that with a track saw. And with such small pieces, I would use a jig saw instead of a big circular saw.
David Hurst a track saw is designed for sheet goods. Once you go outside that material class its less effective. It will never be as versatile as a band saw..
Paul Jenkinson A track saw is for anything you can dream up. Limiting it to sheet goods would be a sin! The festool has many options for clamping. ruclips.net/video/qbtrOXyBr48/видео.html
Hey Rob!!! can you please help me with the dust connection accessories you used to hook up this track saw to a vacuum/extractor? I have the 36v makita track saw and 36v dust extractor with a 1 1/2"x8' hose. I was told part number p-70378 would be the only thing I need to connect the two. im wanting to verify before spending the $
That's correct! Pick up the Quick Connect Adapter (part number P-70378) for use with the 18V X2 LXT (36V) Plunge Circular Saw and Dust Extractor. For further assistance, you can contact the Makita Call Center during business hours at (800)4-MAKITA.
Don't need a riving knife on a track saw if you use it correctly you should never need a riving knife it's not like a table saw the track is what keeps everything Square I don't see how riving knife is going to help in any way
I bought a Kreg Adaptive Cutting System and disappointed with the quality. I may repurpose the table with another track saw and parallel guide system like TSO or Seneca.
david motti yes there is a grooved track that accepts a clamp. This clamping track runs the entire length of the saw track. This track is also used to connect 2 saw tracks together for longer cutting lengths
Just for the record, What is the price for the Makita and the Festool in the US? Here in the UK the difference is £100 so well worth going with Festool every time
This model has a serial error, the 45/48 bevel limiter switch is wrong on most units. YOu set to 45 but tthe scale shows 44, you set 48 but you see 47,2 or so on the scale. Accuracy and reliability is gone. YOu can see this in the video as well! My unit has the same issue, brand new 1d old.
Very cool, but I don't understand the obsession with higher voltage. My Milwaukee M18 7 1/4" circ saw runs on one 18v 9ah battery ripping 16' (moist) dimensional lumber all day with maybe one battery change. If I needed a track saw, I'm trimming, I'm not working that saw with 3/4" bone-dry lumber. Just seems bizarre to me.
TechnicallyMagic as I mention in the video makita adds the higher voltage to tools that need higher speed, power or runtime. Think about ripping oak, mahogany or ipe
I mean I understand it does increase those things, I can't readily handle this Makita saw but I'd be curious as to the weight and balance trade off for that speed and power. I consider my M18 saw with 9ah battery quite heavy already, and as mentioned, that saw ripped over 1,500 board feet (2x8) of floor joists to plane the floor in an old barn I'm working on. Once a day I'd pop a thermal and have to wait for it to cool off. Great channel by the way, wish we had more guys like you here in WNY.
Interested in knowing if using two batteries of differing ages will damage the saw's armature? I committed to using the same new battery pair only for the X2 . Do you see this as necessary? Btw I bought this set up at a promo run but Makita at the Home Depot getting the X2 with two extra 5ah batteries and the track for free. Think it's still running but inventory was an issue both on the X2 and Makitas new 36v 10" compound mitre saw. I was stoked because I'd just sold my cabinet saw for this very reason and I see the Makita as a MUCH better value than Festool. I have yet to see a Festool product that I would spend triple the money to own.
Great looking saw however I saw another review on RUclips where the user got a rip on the end of every piece he cut. He tried fresh blades and made other changes to no avail. An end shot at 11:47 and near the end of the video showed clean cuts so I'm hoping it was just the other reviewers issue as this is one tool I really like. Thanks for great review!
I have had the Makita track saw for a couple years now. I am a fine cabinet guy and it makes super clean cuts. I dont know what was wrong with that guys track saw but that hasnt been my experience.
Kim Daniel do you mean he was experiencing "tear out?" Absolutely not - this saw cuts super clean. I bet his blade was not tight on the arbor or he didn't take the time to remove the clatter by adjusting the saw to the guide fence
Your mention of the full kit cost and features (@6:50) seems to be off. I see some places have the bare kit for $499, but Amazon is at $632.46 as of right now (www.amazon.com/gp/product/B01IVTAO8Y/ref=s9_acsd_al_bw_c_x_2_w?th=1). The biggest problem I see with the kit is you don't get a guide! I understand the bare tool, but why would they offer a "full" kit with no guide rail? There is a 55 tooth blade, but I see no mention of the 55" guide being included anywhere (www.makitatools.com/products/details/XPS01PTJ). Thanks for the review.
I run evolution blades in my skilly now . I wonder if I could get one for these. The evolution blade changed my makita skilly into an absolute weapon. Doing RIP out run straight through nails and screws . Dryline cut a hole pack of metal stud shring. Round off a screw plunge cut straight down the joint cut right through the bastard. Copper pipe get the fuck out me way. Will never use another blade brand if I can help it from now on .
I have the corded version of the saw and the tracks have a grippy rubber in the bottom. They really stick well. There are clamps available that insert into a space under the track that work very well in conjunction with the saw.
Ben Hoffman it did move a bit, that CDX had a warp in it, it rained pretty hard here for 2 days and it got wet. I used the CDX for the runtime test. Shop testing showed it stuck to the wood (Birch ply) perfectly.
Ben Hoffman ben both the other commenters are spot on. The claps work amazingly well, and the rubber strips allow you to make many cuts without clamping. I clamp all MONEY cuts
Best tool reviews on the internet!
As I said in previous comment, This is a no brainer cordless tool. Combine it with Makita XCV05 Backpack Vacuum and you go totally cordless. Rob, you are my favorite tool reviewer (who cost me a lot!!). Straight to the point, talking about real professional concerns using clear language with tons of great shots and closeups. Please pass my greetings to the rest of behind the scene team. Khalid.
Khalid Al-Bahi wow that's a great compliment! Thanks man
You've earned it. For people like me living in places where the only way to buy non basic tools is via Amazon or prepaid order via local dealer, a tool reviewer is the person I trust on investing my hard earned money. In this congested world of RUclipsrs, you shine in this field simply because I don't have to watch you unboxing a power tool like an iPhone and trying to figure out what it does, how pretty it looks (or don't), read official website info, while trying to be funny. I need someone to tell me if this tool is gonna replace my current one? Will it save me time and money on the go? How powerful is it in terms of professional tasks not in Amps or Watts, etc. Your videos are short and sweet (unlike my comments) and whenever more details are required a link to a full article is provided. That's IMPO how tool reviewing should be. Khalid.
I’ve seen about 10 reviews none of them explain as good as you mate, loved it 👍
Man Rob, your videos are one of my go-tos now for research for new tools. So well done. Thank you!
thanks Greg
I have owned one of these for almost a year now, This saw makes me look good, I have become dependent on this tool. I construct JukeBoxes out of 3/4 treated plywood, this saw shows its sweet-spot when cutting.
I always wanted a track saw but refused to pay what I thought was way to much money for the Festool. I've had my saw for 3 years, use it almost every day and am looking forward to adding the battery powered unit in the near future. Since the manufactures force us to choose between them because of the proprietary battery issues I made my peace with it, settling on Makita. Even though I think that many of their offerings come in second or even third in some cases the differences are usually small enough that sticking with tools that use the same battery is the deciding factor for me. Any that's only my two cents. What I like most about your videos is how often I simply agree with your judgement (-; . Keep up the good work!
There are adapters but i would suggest that you make your own with voltage cutoff. Mine had insufficient contact and burned the battery.
I've had a Festool ts for many years and this Makita cordless might be my next. I truly detest reviews from someone who doesn't use the item in question on a regular basis. That's what makes your reviews credible, you're a carpenter who actually uses these tools for a living. Thanks
Update: I purchased the Makita ts and have used it for 3 mo and it cuts, performs on par w/ Festool. The cordless aspect is the reason it stays in the truck for jobsite use. Festool ts stays home for shop duty. This review helped me decide on the purchase. Thanks again
Another great review. 👍 Thank you for putting in the time and effort to bring us these great reviews. Now can you recommend anything for the pain my wallet goes through when it sees me watching your reviews 😜
For anyone with a festool extractor, the D27 hose fits on the dust port perfectly.
Best all-around review yet on this Makita Saw. Thank you.
Your review sealed the deal, I’m going to buy one
Boom
Your guys' reviews are top notch. Subscribed!
Boy do I like your presentation skills Rob! I reckon you could sell ice to the Eskimos. Please, please protect your health though
Just ordered mine!! :)
Thanks for your great Reviews, greetings from Germany!!!
Great review. Thorough and I love your energy. subscribed
Skill Builder thx pal
@@ConcordCarpenter i bet your a foot guy
@@jacobswedberg1402 foot?
Hey Rob, I've had this saw for a while now, can't imagine why anyone would spend the money on a Festool, little known fact, the Festool guiderail and the Makita guide rail are interchangeable , and the Makita version is cheaper, HA! Makita track saw is second to none.
The Wen version is even cheaper. I paid something like $50 for 100 inches
Some people have money to burn and lose their mind... just like Eddie Murphy said in "Beverly Hills Cop II".
I've had bad experiences with Wen Tools so I stopped buying them.
My temptation is to buy this thing tomorrow. I just bought the 10" cordless slider last week though.... I better take a breath for at least a month...
thanks for a comprehensive review - you answered all my questions.
Thanks rob !! I can trust a carpenter that uses it to make a living!,
In reply to you're question Gary, " what isn't precise ? ". I have extensive experience
with both the Makita and Festool track saws as i own the Makita and my partner owns the Festool. Both are excellent saws, but as i admitted to my partner the Festool glides
down the straight guide with less wobble and resistance than the akita, also the plunge on the
festool seems better, " in my opinion" I would still by the akita, the Festool is not worth the money
Mike M
oh my God Belts and Boxes sent me here. never even HEARD of "track saw" till the year 2020, but one look and now i want one SO BAD.
Welcome!
Thanks so much, Rob, for a great review. I’m gonna have to get one of these Makiter sawrs.
So if you had a good track saw with the TSO TPG track accessory system and a good router/table, how much need would you still have for a table saw? Trying to build a small shop in rather limited space and a table saw would take up a lot of space.
This popped up in my feed. I really want to get this for my step dad because he helps me so much on side projects. But right now they are so hard to find!
Wait for Black Friday
Thank you so much for your review about Makita plunge circular saw, i need to buy it soon,…
I have the "corded" version of this Makita saw. While I like the precision of the cut the cord is a pain in the butt.
Thanks for an in depth informative review! 👍👊
Huh, over one thousand more rpm blade speed over the corded version too. Have you ever noticed if the little extra weight helps in consistent movement and even subduing some minuscule vibes? Great review as always!
It’s not a completely seamless transition. The cordless saw comes with a 1.5 mm kerf blade and the corded blade is thicker. That will make a difference in the splinter guard. If you have both saws it would be beneficial to label which track was used with which saw.
Robert Melrose i'll look into this, I'm not 100% sold that the difference in size truly matters
If you cut the splinter guard with the thicker blade first then use the track with the cordless saw your cut line won’t match up because there will be a gap.
Robert Melrose 100% correct
This not a major problem. Replacement of the splinter guard is available from may sources.
Mark F. The blade body references off the same plane but the carbide teeth are wider so it will cut into the strip.
I have the dewalt one and love it. This one looks nice too. Wish Dewalt made the Cordless router, that makita router is beautiful.
jbravo70 agreed
That's why I run both Dewalt and Makita. I have drill/driver plus RO sander and palm router from Makita, and everything else from Dewalt. Could probably get by with only Makita tools, but I like the color yellow.
Still deciding between this and the Festool
Loved the review and I love the real world test that you made.
Great review and great video. Just made up my mind.
One big difference that I noticed between the corded and cordless versions is that the blade on the cordless version is much thinner. This is a smart strategy for improving battery life but I expect the thinner blade will vibrate more and the cuts won't be quite as good. Are there any issues using it with a thicker blade?
When you go from strait to beveled cuts does it trim the black strip on the rail? Will the strip be correct for strait as well as bevel cuts?
What is the blue spring loaded wheel at the top of the high adjust track scale for?
Great honest review.👍🏾 Any idea when if and when Milwaukee will be releasing one?
P F I’m thinking next year
A Concord Carpenter / ToolBoxBuzz - Well, tell them I’m waiting.😂 Thank you.👍🏾
I thought you would have mention the Makita guide rail clamps, considering you have an amazing clamp collection in the background.
Man, prices have gone up! Where is the best place to buy this?
How does the power stack up against the corded version? Particularly in thick material, like doubled birch 3/4 ply? Need something that will do the job without running to the battery charger all the time.
Steve Jones It will cut double plywood no problem, I like 104 rips and three-quarter plywood
Could you answer two questions for me? I just purchased this saw with the 55" and 118" tracks. It seems there is no positive stop for 0 (90) degrees with this saw. The manual mentions positive stops for 22.5 and 90 degrees, but not for 0. If this is true, then the only way to set the saw to 0 degrees would be to loosen the clamping knobs and set the saw to 0 degrees by looking at the arrow on the bevel scale. I don't like trusting my eye to do this. Checking that the blade is 90 degrees to the the saw's base with a square each time I set the saw to 0 degrees seems very tedious, as I feel you need at least two people to do this properly (one person to hold the blade fully plunged and another to check the blade with a square at eye level). Is there something I'm missing here? Also, how would I cut off the rubber strip at each end of the tracks? To do this, one of the tension knobs that holds the saw firmly on the rail has to slide off of the rail to cut off the very end of the strip. Any advice would be seriously appreciated! I've watched just about every setup video in regard to this saw and it seems these issues aren't addressed. Sorry for the length of this comment..
The positive stop is when you zero the tool out it stops automatically and then you just lock the knob I don’t think you’re missing anything. When you use the saw and track for the first time you will cut the rubber on the track if any excess is coming out of the ends just use a utility knife
Great review. Can you compare this to the Bosch GTK 55?
Great review ! Thanks!
Is it the same reference than the DSP600 in Europe? Cannot find corresponding ref
Question 2. track guides. Someone was saying to use a TSO connector to keep the two tracks in line. What do you think?
I got a question about the track itself, how does it manage not to move without any clamps?
kRizm rubber on bottom, for a serious cut I would clamp it, I was holding it to save on time
What an awesome review. Every word meaningful. Thanks
This has an electric brake which the corded does not - correct?
When u will test the Kreg's AccuCut? Looks great. Excelent video of Track saw. Nice job
Ill look at it
I've seen it but wasn't overly excited to test it
Without the AWS, how do you handle turning dust collection on and off? And would you recommend paying the premium for the AWS version?
personally? yes!
Oh wow how beautiful thin groove that this can make!!? this can easy Plunge cut right?
Rob, really appreciate your real world testing and reviews. Just to clarify, the $499 kit (xps01ptj) does NOT come with the 55" track (06:58).
It does come with the other things you mention, which I think makes the kit a very good value (dual port rapid charger, two systainers/makpacs, and two 5 AH batteries for only $150 above the price of the bare tool. I am heavily invested in the Milwaukee M12 and M18 platforms, but bought this saw as my first cordless Makita and love it. Will definitely be picking up the trim router you reviewed earlier.
Thomas Dye I just checked, it's looks like it is NOT included
There were some specials that did include the track. Look for them, especially during the holidays, Father's Day, etc. Also, this Makita track and Festool Track are interchangeable
Would the XPS01Z work with 3Ah batteries?
Every review I've seen uses the 5Ah batteries but I'm trying to avoid buying new batteries.
I don't expect to make more than 20 cuts in one day, so I'm not looking for much in terms of battery life.
Which is a nicer user experience? The Flexvolt or the Makita?
Thank you Sir - love your reviews
davis2022 personally, I prefer the Makita
Anyone have a dust port adapter recommendation for connecting up to a Ridgid vac? I’ve got a shop hose with a 2.25” end on it and a “car” hose with a 1.25” end on it. Thanks.
Hey question, I just purchased the 36v track saw, the guide rail has a black rubber strip sticking out where the blade is, does that need to be trimmed off with the blade path? Or does the saw need to be adjusted on the tail to clear that strip?
Needs to be cut, yeah
Rob I don't work as a contractor and I am looking to purchase either the battery or corded version of this track saw. Do you feel that corded powered hand tools are on the way out? I can see the advantage when working mobile no need to roll out extension cords and the ease not to have the cord in your way when you cutting. In a shop do you feel it is worth investing for a cordless saw vs a corded?
Gary Karczewski in your case, it's only worth going cordless if your invested in the battery platform
Scoring feature is a nice idea, but this is less necessary than a riving knife which seems to be a BIG miss on this saw especially when they put a lot of thought into other features. Agree that wrong size dust port is shameful as is not having blades released at same time as the saw. There isn't a cross cut and rip blade option, seriously? Speaking of which, how were blade changes? Great review Rob, thanks for no nonsense reviews!
Don Donaldson easy blade change, on board Allen wrench
Thx Rob! It is just too bad they didn't release all blade options out of the chute.
Riving knife on a saw that pivots when plunging may be problematic.
Nice review but how about dust control? Without a corded saw how does the vac work without manually having to turn the vac on and off?
I have two Makita track saws but need the vac system, if it means having to buy another vac with wireless technology that makes it a fairly expensive purchase.
there is a second, "upgraded" model of this same cordless saw that includes AWS, Makita's wireless tool-to-tool communication platform that will also turn on your vac the moment you engage the saw's trigger. That being said, it is easily $100+ more for this wirelessly capable version in the tool only selection, & I imagine comparable price increases with any kits if they even exist with this guy. Be sure to remember that you need to have purchased a vac rocking that AWS "upgrade" just the same, and indeed these costs would add up rather quickly... then again, could prob pick up both for less than a Festool hahahaha
I'd love to see them make a 7 1/4 circ saw for the 12v line that runs off 2 12v batteries. Their current tiny 12v circ saw is kinda pointless with that sub 4 inch blade. That would be great.
I'm currently researching which track saw to buy. Based on reviews, I've narrowed to Makita or Festool. Obviously a significant price difference. Two concerns I have that I hope people can weigh in about. First, is the absence of a riving knife something I should be concerned about? Secondly, many reviews I read on the makita saw complain about tracks not being straight or flat, or a lot of slop in the movement of the saw on the track. Looking to hear from anyone with input on these concerns. Thanks!
How does it handle thick hardwood rips? Like 8/4 maple or cherry? I'd want to be able to put a straight cut on rough lumber but haven't seen anyone mention how it handles hard work, only sheet goods.
cuts Oak and Mahogany fine - didn't cut 8/4. I have 8/4 Walnut in the shop - want me to try it?
That would be wonderful. I can't think of a better "torture" test in real life that thick hardwood rip cuts. If it can do that I'll be convinced to get this over the corded brother. Rate it 1-10 for task capability. Thank you sir.
Question. Where can I get the dust collection adapter? For a shop vac.
Where can I find it at for that price point? Also do you reach for the makita or the dewalt cordless track saw when you are in need of one? Thanks for the informative video keep them coming!
Andrew Harris makita
Alternative to a table saw? New to wood working, limited on space and I do not like job site "portable" table saws. I'm dying a Hybrid table saw but, I don't have thousands to spend right now. I am getting good with my circular saw but, it's a pita to setup, too time consuming.
Torn between this and the new Makita DXH08 / DHS782 36v circular which has just been released. The 08 fits straight on the track and has a 190mm blade. Annoyingly there's no reviews out of it yet. Anyone had a go with it? does it cut as nice as the plunge? Can't make my mind up.
Great review!
Very good video that throughly details this saw. Without a riving knife, did the saw ever kick back or bind up on thicker or more dense materials? OSB & ply can be bowed through its length or across the middle. How do you keep the track flat across the material on those crosscuts? Sub'd
Georgia Fan no kickbacks, for money cuts I use clamps
Is there a way to clamp the track down without the clamps getting in the way, like Festool and Kreg tracks have and does Makita sell them?
Thank You
Charles M Thank you for the info👍🏻👍🏻
Im still trying to figure out what the round teal colored circle at the top of the depth gauge is. Its works like the 2mm stop, but its deeper. Not sure what this preset is for
It sets the blade depth for blade changing...
Thx Rob!
Do you have any tips for calibrating the saw to cut a perfect 90 degree cut? I was cutting some tops for a bench and when i went to join the i couldn't get a tight joint. I realized it was due to not being perfect 90. Couldn't figure out how to set the set screws just right. Anyone got any tips?
Is there still a place for a table saw if you have a track saw? I just bought a table saw but kind of scared to use it.
yes
Very nice Job....
Great video!! I want one! I love maketta!
How does this perform when cutting hardwoods like teak or hard maple ??
Fine, works hard but fine
@@ConcordCarpenter thanks for fast answer- appreciate it and just ordered the saw. Thanks
How did you fix the guide rail? Or is not necessary? Thank you
highlineR32 there are non-stick strips on the bottom but keep it in place, however the best practice is to use clamps they attacked on the bottom of the rail
Hey Rob, watched the vid on Makita cordless track saw, I have the corded version because i want the power
in that particular application, that said I bought the Makita instead of Festool because their so similar in
performance, they even share the same fence, except the festool copy is more ? The Makita gives a lot
more bang for the buck, doesn't quite have the precision of the Festool.
Mike Mancini
What isn't precise?
Michael Mancini mike you can do everything a Festool does with this saw. I own the corded festool, I'd rather keep this in the trailer
Michael Mancini adjust it to the track properly so there is not to much slop to the track my makita is nearly two years old and is still bang on accurate. A mate of mine has the festool and it's no more or less accurate. I'd stick to my makita.
I have a small garage shop with no room for a table saw. Do you think the track saw can make the cuts through hard wood for smaller projects like cutting boards and boxes or is it strictly made for sheet goods? Trying to decide between a track saw and a band saw.
David Hurst you would need something like the festool mft table to do that with a track saw. And with such small pieces, I would use a jig saw instead of a big circular saw.
David Hurst a track saw is designed for sheet goods. Once you go outside that material class its less effective. It will never be as versatile as a band saw..
Paul Jenkinson
A track saw is for anything you can dream up. Limiting it to sheet goods would be a sin!
The festool has many options for clamping.
ruclips.net/video/qbtrOXyBr48/видео.html
Look at toolifys channel. His shop is super small.
Nice video thanks
Most welcome
Is this the Makita AWS version?
Hey Rob!!! can you please help me with the dust connection accessories you used to hook up this track saw to a vacuum/extractor? I have the 36v makita track saw and 36v dust extractor with a 1 1/2"x8' hose. I was told part number p-70378 would be the only thing I need to connect the two. im wanting to verify before spending the $
That's correct! Pick up the Quick Connect Adapter (part number P-70378) for use with the 18V X2 LXT (36V) Plunge Circular Saw and Dust Extractor. For further assistance, you can contact the Makita Call Center during business hours at (800)4-MAKITA.
Don't need a riving knife on a track saw if you use it correctly you should never need a riving knife it's not like a table saw the track is what keeps everything Square I don't see how riving knife is going to help in any way
Great tool!
Awesome tool
I bought a Kreg Adaptive Cutting System and disappointed with the quality. I may repurpose the table with another track saw and parallel guide system like TSO or Seneca.
I’ve never used one so track doesn’t need to be clamped?
no - but its best practice to clamp it
Than from bottom I guess
david motti yes there is a grooved track that accepts a clamp. This clamping track runs the entire length of the saw track. This track is also used to connect 2 saw tracks together for longer cutting lengths
Thank you and thanks for the great videos.
Just for the record, What is the price for the Makita and the Festool in the US? Here in the UK the difference is £100 so well worth going with Festool every time
For comparable models it's almost double for the Festool.
Not sure I understand the advantages of cordless in a powered shop with dust hose.
Looks good. How do you think it compares to the Festool? Great, informative videos as always. Keep up the good work!
SerranoPE on par, more powerful
This model has a serial error, the 45/48 bevel limiter switch is wrong on most units. YOu set to 45 but tthe scale shows 44, you set 48 but you see 47,2 or so on the scale. Accuracy and reliability is gone. YOu can see this in the video as well! My unit has the same issue, brand new 1d old.
Very cool, but I don't understand the obsession with higher voltage. My Milwaukee M18 7 1/4" circ saw runs on one 18v 9ah battery ripping 16' (moist) dimensional lumber all day with maybe one battery change. If I needed a track saw, I'm trimming, I'm not working that saw with 3/4" bone-dry lumber. Just seems bizarre to me.
TechnicallyMagic as I mention in the video makita adds the higher voltage to tools that need higher speed, power or runtime. Think about ripping oak, mahogany or ipe
I mean I understand it does increase those things, I can't readily handle this Makita saw but I'd be curious as to the weight and balance trade off for that speed and power. I consider my M18 saw with 9ah battery quite heavy already, and as mentioned, that saw ripped over 1,500 board feet (2x8) of floor joists to plane the floor in an old barn I'm working on. Once a day I'd pop a thermal and have to wait for it to cool off. Great channel by the way, wish we had more guys like you here in WNY.
Why would you need a -1 degree cut?
Hafliði Guðjónsson matching up stuff, back bevel for tight fits, etc
Interested in knowing if using two batteries of differing ages will damage the saw's armature? I committed to using the same new battery pair only for the X2 . Do you see this as necessary?
Btw I bought this set up at a promo run but Makita at the Home Depot getting the X2 with two extra 5ah batteries and the track for free. Think it's still running but inventory was an issue both on the X2 and Makitas new 36v 10" compound mitre saw. I was stoked because I'd just sold my cabinet saw for this very reason and I see the Makita as a MUCH better value than Festool. I have yet to see a Festool product that I would spend triple the money to own.
Gary Kimes no
Great looking saw however I saw another review on RUclips where the user got a rip on the end of every piece he cut. He tried fresh blades and made other changes to no avail. An end shot at 11:47 and near the end of the video showed clean cuts so I'm hoping it was just the other reviewers issue as this is one tool I really like. Thanks for great review!
I have had the Makita track saw for a couple years now. I am a fine cabinet guy and it makes super clean cuts. I dont know what was wrong with that guys track saw but that hasnt been my experience.
Kim Daniel do you mean he was experiencing "tear out?" Absolutely not - this saw cuts super clean. I bet his blade was not tight on the arbor or he didn't take the time to remove the clatter by adjusting the saw to the guide fence
Your mention of the full kit cost and features (@6:50) seems to be off. I see some places have the bare kit for $499, but Amazon is at $632.46 as of right now (www.amazon.com/gp/product/B01IVTAO8Y/ref=s9_acsd_al_bw_c_x_2_w?th=1).
The biggest problem I see with the kit is you don't get a guide! I understand the bare tool, but why would they offer a "full" kit with no guide rail? There is a 55 tooth blade, but I see no mention of the 55" guide being included anywhere (www.makitatools.com/products/details/XPS01PTJ).
Thanks for the review.
Would anyone happen to know the name or part # for the dust bag? Thanks in advance.
Makita 122562-9 Dust Collection Bag. Look below in product description:
www.makitatools.com/products/details/122562-9
Sorry meant to say straight guide not fence
wow no test cuts, no double checking lol 4:28 maybe the track needs to be clamped as it just moves around stuffing cuts
I run evolution blades in my skilly now . I wonder if I could get one for these. The evolution blade changed my makita skilly into an absolute weapon. Doing RIP out run straight through nails and screws . Dryline cut a hole pack of metal stud shring. Round off a screw plunge cut straight down the joint cut right through the bastard. Copper pipe get the fuck out me way. Will never use another blade brand if I can help it from now on .
How does it go cutting concrete? I need something like this for a start cut for the big saw
How well does the track stick to the wood? It appears to be moving around while you use it.
I have the corded version of the saw and the tracks have a grippy rubber in the bottom. They really stick well. There are clamps available that insert into a space under the track that work very well in conjunction with the saw.
Ben Hoffman it did move a bit, that CDX had a warp in it, it rained pretty hard here for 2 days and it got wet. I used the CDX for the runtime test. Shop testing showed it stuck to the wood (Birch ply) perfectly.
Ben Hoffman ben both the other commenters are spot on. The claps work amazingly well, and the rubber strips allow you to make many cuts without clamping. I clamp all MONEY cuts
Makes sense. I like that - 'money cut'!
It would be interesting to see this vs the kreg accu-cut
@ 6:51 ahh yes, the accent checks out
MAKITA